• Journal of KIISE:Software and Applications
• /
• v.26 no.8
• /
• pp.1000-1009
• /
• 1999

본 논문에서는 비디오 데이타를 분석하여 다양한 카메라의 동작을 정량적으로 추출하는 방법을 제안한다. 본 논문에서 제안하는 카메라의 동작 추출 방법은 어파인 모델을 이용한 방법으로 인접 영상으로부터 추출한 동작 벡터를 어파인 모델에 적용하고 회귀분석법을 통해 어파인 모델을 구성하는 파라미터를 구한다. 그런 다음, 파라미터들의 크기를 분석하고 상호 관계를 해석하여 카메라의 동작을 추출한다. 본 논문에서는 잡음이 포함된 동작 벡터를 필터링하여 사용하므로 잡음에 강건한 결과를 얻을 수 있다. 그리고 어파인 모델을 구성하는 파라미터만을 분석함으로써 카메라의 다양한 동작을 간단하면서도 비교적 정확하게 추출한다. 실험 결과는 카메라의 동작을 정확하게 추출하고 있음을 보여준다.Abstract This paper presents an elegant method, an affine-model based approach, that can qualitatively estimate the information of camera motion. We define various types of camera motion by means of parameters of an affine-model. To get those parameters from images, we fit an affine-model to the field of instantaneous velocities, rather than raw images. We correlate consecutive images to get instantaneous velocities. The size filtering of the velocities are applied to remove noisy components, and the regression approach is employed for the fitting procedure. The fitted values of the parameters are examined to get the estimates of camera motion. The experimental results show that the suggested approach can yield the qualitative information of camera motion successfully.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.200-208
• /
• 2008

Total Hip Replacement(THR) is a surgical procedure that replaces a diseased hip joint with a prosthesis. A plastic or metal cup forms the socket, and the head of the femur is replaced by a metal ball on a stem placed inside the femur. Due to the various types and shapes of human hip joint of every individual, a selected commercial implant sometimes may not be the best-fit to a patient, or it cannot be applied because of its discrepancy. Hence extracting geometry parameters of hip joint is one of the most crucial processes in designing custom-made implants. This paper describes the framework of a methodology to extract the geometric parameters of the hip joint. The parameters include anatomical axis, femoral head, head offset length, femoral neck, neck shaft angle, anteversion, acetabulum, and canal flare index. The proposed system automatically recommends the size and shape of a custom-made hip implant with respect to the patient's individual anatomy from 3D models of hip structures. The proposed procedure creating these custom-made implants with some typical examples is precisely presented and discussed in this paper.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.4
• /
• pp.739-748
• /
• 2020

In this study, a wrist protector was manufactured and designed using 3D printing technology to prevent wrist pain when riding a bicycle with a high forward-tilted saddle. The efficiency of the design was analyzed in objective and subjective evaluations. First, seven women in their twenties selected their most preferred design by subjective evaluation from among three 3D wrist protectors. Then electromyography (EMG) was measured and subjective sensations were evaluated while wearing and not wearing the preferred 3D wrist protector as selected by cyclists. Experimental results showed that a wrist-bending angle of 30 degrees was most favored. When the 3D wrist protector was worn, muscle activity was smaller at the flexor carpus radialis position than when the 3D wrist protector was not worn; muscle fatigue was also lower. In the subjective evaluation, the 3D wrist protector was more comfortable than no protector, and wrist fatigue was also lower. In addition, the wrist protector was rated positively for its design suitability, size adequacy, ease of operation, and fit; however, cyclists felt that a little more cushioning was needed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.212-217
• /
• 1993

In this paper, characteristics of the motions of a human arm are investigated experimentally. When the conditions of the target point are restricted, human adjusts its trajectory and velocity pattern of the arm to fit the conditions skillfully. The purpose of this work is to examine the characteristics of the trajectory, velocity pattern, and the size of the duration in the following cases. First, we examine the case of point-to-point motion. The results are consistent with the minimum jerk theory. However, individual differences in the length of the duration can be observed in the experiment. Second, we examine the case which requires accuracy of positioning at the target point. It is found that the velocity pattern differs from the bell shaped pattern explained by the minimum jerk theory, and has its peak in the first half of the duration. When higher accuracy of the positioning is required, learning effects can be observed. Finally, to examine the case which requires constraint of the arm posture at the target point, we conduct experiments of a human trying to grasp a cup. It is considered that this motion consists of two steps : one is the positioning motion of the person in order to start the grasping motion, the other is the grasping motion of the human's hand approaching toward the cup and grasping it. In addition, two representative velocity patterns are observed : one is the similar velocity pattern explained in the above experiment, the other is the velocity pattern which has its relative maximum in the latter half of the duration.

• Human Ecology Research
• /
• v.51 no.5
• /
• pp.473-481
• /
• 2013

The purpose of this study was to investigate the moderating effects of a size of the friendship network and quality of friendship on the associations between mutual antipathy and maladjustment. The subjects were 678 fifth- and sixth-grade primary school children who were recruited from a public school in Bucheon City. The Peer Nomination Inventory was used to assess mutual antipathy, peer victimization, social withdrawal, aggression, and the friendship network. The children were given a classroom roster and asked to nominate up to three classmates who fit each description. Additionally, the children reported the quality of their friendships using the Friendship Quality Scale. Each child was asked to indicate his or her one best friend and rate how accurately a sentence describe done of their best friends on the scale. The results revealed that the friendship network and friendship quality significantly moderated the relationships between mutual antipathy and social withdrawal, and peer victimization. The magnitude of the association between mutual antipathy and social withdrawal was not significant for large friendship networks and high quality friendships. Although mutual antipathy was significantly associated with peer victimization, the association was stronger at lower levels than at higher levels of the friendship network and quality. However, there was no moderating effect of the friendship network and quality on the association between mutual antipathy and aggression. A large friendship network and high quality friendship could be protective factors among those who have mutual antipathy in peer groups.

• Culinary science and hospitality research
• /
• v.13 no.1 s.32
• /
• pp.152-165
• /
• 2007

The purpose of this study is to prove that the appropriate fit between service failure and recovery strategy can efficiently maximize customer satisfaction and behavioral intention, by using the prepared scenario through comprehensive approach concerning how the expectation level of service recovery has influence on perceived fairness, satisfaction and behavioral intention of service recovery based upon size in case of service failure. This study has been conducted by way of selection of filling-up type questionnaires for customers themselves who have experience in service failure out of customers who can easily visit family and hotel restaurants, that is, domestic restaurants in Seoul area, $June{\sim}August$ 2004, by setting factorial design of 2(control, severeness)$\times$3(distributive fairness, procedural fairness, mutual relational fairness)$\times$2(customer satisfaction, customer behavior). The survey was performed on the customers who visited common restaurants, family restaurants, hotel restaurants, etc. mainly in Seoul, and total 600 sheets of questionnaires were distributed and 496 sheets of them were returned(82.67% of return ratio). Research findings are as follows; First, perceived recovery justice has an effect on customer satisfaction and behavioral intention. Second, customer satisfaction and restaurant satisfaction have positive influence on behavioral intention. The results will be helpful for them to develop a further service failure and recovery framework. For service marketing managers, the results will suggest specific guidelines for establishing service recovery strategies.

• Fashion & Textile Research Journal
• /
• v.17 no.4
• /
• pp.597-603
• /
• 2015

This study investigates the actual domestic and overseas cyclewear wearing conditions for male high school cyclists. The study results provide factors and degree of dissatisfaction as basic data for cyclewear development. This study was conducted on 35 male high school cyclists (freshman to seniors) by a questionnaire and interview method. Study results were: Male high school cyclists considered functionality as most important when they bought cyclewear and the brand they most often bought was a cheap domestic brand. Dissatisfaction with the crotch, thigh circumference and minimum leg circumference was higher than other parts during wearing. A cyclist is more sensitive to wear because they require more lower body motion than other parts. Cyclewear should be: less transformed even by frequent laundering, made of breathable material and use a sewing technique that minimizes air resistance and increases fit the body. Functional pads ergonomically designed with high tactile materials should be developed to prevent 'saddle sore' and groin soreness region that happens because of a lower body bending posture when cycling. A follow-up study is recommended to further develop excellence in cyclewear functionality and dimension suitability for male high school cyclists through the size system.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.163-170
• /
• 2006

Thin films play an important role in many technological applications including microelectronic devices, magnetic storage media, MEMS and surface coatings. It is well known that a thin film's material properties can be very different front the corresponding bulk properties and thus there has been a strong need for the development of a miniature tester to measure the mechanical properties of a thin film. Two testers are designed and set up in small size of 62 mm width, 20 mm depth and 90-120 mm height to fit in a chamber of scanning electron microscope (SEM). One tester has a homemade 0.2 N load cell and a low-priced electromagnetic actuator. The other has a commercial 5 N load cell, a $52{\mu}m$ piezoelectric actuator and some novel grips. Two types of 3.5 microns thick polysilicon specimen are tested to prove the testers' applicability. The strain is measured by the two ways. Firstly, it is measured by an ISDG system in the atmosphere far the reference. Secondly, the same test is repeated in a SEM chamber to monitor the strain as an in-situ experiment. The strain is evaluated by observing the gap change between two markers.

• The Korean Journal of Applied Statistics
• /
• v.21 no.2
• /
• pp.265-273
• /
• 2008

Kim (2001a) presented a modification of the Shapiro and Wilk (1972) test for exponentiality based on the ratio of two asymptotically efficient estimates of scale. In this paper we modify this test statistic when the sample is censored. We use the normalized spacings based on the sample data, which was used in Samanta and Schwarz (1988) to modify the Shapiro and Wilk (1972) statistic to the censored data. As a result the modified statistics have the same null distribution as the uncensored case with a corresponding reduction in sample size. Through a simulation study it is found that the proposed statistic has higher power than Samanta and Schwarz (1988) statistic especially for the alternatives with the coefficient of variation greater than or equal to 1.

• Korean Journal of Human Ecology
• /
• v.12 no.4
• /
• pp.571-578
• /
• 2003

The purpose of this research was to provide basic information for enhancing sizing suitability in terms of the need for appropriate fit in head gear. The method for this research was to survey about sizing system of head gear, basic measure part, repair service. The subject of this study were 15 head gear companies. The results of this research were as follows : 1. In the sex target analysis according to company type, most of fashion brand companies were producing woman's head gear. In case of the company to produce man's head gear, sizes appeared variously. On the other hand, the sports brand companies were producing unisex head gear and safety helmet companies were producing man's one. 2. The number of size of head gear manufacturing companies were under 3 sizing system. This means that the sizing system of current head gear manufacturing company isn't various. 3. While the measuring part using currently in the company was head girth, one to be considered necessary for manufacturing of head gear except the head girth was head height.