• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.6
• /
• pp.59-76
• /
• 2019

Most technology-based entrepreneurship(TBE) go through an process of decline or disappear without overcoming the valley of death(VoD). The purpose of this study is to identify the growth dimension of TBE and to test the influence of firms activities on firms growth over time. This study identified the two-dimensional growth dimension divided by size and profit through exploratory factor analysis(EFA) of a number of growth indicators. Then, we defined the discrete state of growth firm in four states, divided by size and profit, and five states, including the closure of business. Multi-nomial logit model is used to predict the effect of TBE activities on a discrete state of growth firm(size×profit, closure of business) based on multiple independent variables. The independent variables are based on five representative firms activities: employment, marketing, R&D, financial activities, and general management activities. The growth stage of TBE over time has been categorized into three stages: early stage, middle stage, and late stage of business, taking into account the main periods during which the survival rate of startups sharply decreases. The analytical data of this study was based on the secondary data of the start-up supporting companies of government and public institutions. The subjects of analysis were TBE within 10 years. As a result of the empirical analysis, the employment and marketing activities of TBE show that early and mid-term activities had an effect on the state of firms growth. However, if there is a difference, employment activities have both positive and negative effects, while marketing activities have only a positive effect on size and profit growth. And besides, R&D activities, financial activities, and general management activities throughout the entire process of firms growth were found to be firms activities that have both positive and negative effects on firms growth. In addition, the age of the founder, the firms' industry, and the geographic location of the firms, which are general characteristics of the company, were found to have a distinctive effect on the growth status of the firms according to the growth stage.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.73-81
• /
• 2009

While various factors in passenger and freight demand analysis affect on destination choice, a key factor, in general. is an attractiveness measure by size variable (e.g., population. employment etc) in destination zone. In order to measure the attractiveness, some empirical studies suggested that disaggregate gravity model are more suitable than aggregate gravity model. This study proposes that truck travelers trip diary data among Korean commodity flow data could be used to estimate the behaviors of incorporating trip departure time, activity duration and attractiveness in destination. As a result, the main findings of size and distance variables coincide with the conventional gravity model having a positive effect of population variable and a negative effect of distance variable. Due to disaggregate gravity modeling, the unique findings of this study reports that small trucks are more likely to choose short distance and early morning, morning peak and afternoon peak departure time choice. On the other hand, large trucks are more likely to choose long distance and night time departure time choice.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.941-951
• /
• 1994

The resilient behavior of subbase materials, locally used in Korea. were evaluated in this study by performing laboratory MR tests. The variations of the MR value according to LVDT's location in experiments and moisture conditions, respectively, were evaluated. And, in order to determine the relevant MR characteristics of the prototype materials, laboratory model tests containing smaller particles than those of the prototype were conducted. Based on above results, the relationship of the MR and the bulk stress (${\theta}$) was suggested. The case using internal LVDT. gave much larger $M_R$ value than that using external LVDT, since the external LVDT somewhat overestimates the resilient strain. The measured $M_R$ in damp conditions ($S_r$=40%) was larger than that in wet conditions ($S_r$=70%) by about 10%. The relationship between the $M_R$ and the void ratio was linear according to particle size effect. The relationship of the $M_R$ and the bulk stress (${\theta}$) on subbase materials in damp conditions to be used in Korea could be recommended as $M_R=3960{\cdot}{\theta}^{0.60}$ psi.

• Preventive Nutrition and Food Science
• /
• v.16 no.2
• /
• pp.174-178
• /
• 2011

The cell permeability and cytotoxic effects of different-sized zinc oxide (ZnO) particles were investigated using a human colorectal adenocarcinoma cell line called Caco-2. Morphological observation by scanning electron microscopy revealed that three zinc oxides with different mean particle sizes (ZnO-1, 20 nm; ZnO-2, 90~200 nm; ZnO-3, $1\sim5\;{\mu}m$) tended to aggregate, particularly in the case of ZnO-1. When cytotoxicities of all three sizes of zinc oxide particles were measured at concentration ranges of $1\sim1000\;{\mu}g$/mL, significant decreases in cell viability were observed at concentrations of $50\;{\mu}g$/mL and higher. Among the three zinc oxides, ZnO-1 showed the lowest viability at $50\;{\mu}g$/mL in Caco-2 cells, followed by ZnO-2 and ZnO-3. The permeate concentration of ZnO-1 from the apical to the basolateral side in the Caco-2 model system after four hours was about three-fold higher than that of either ZnO-2 or ZnO-3. These results demonstrated that ZnO-1, with a 20 nm mean particle size, had poorer viability and better permeability in Caco-2 cells than ZnO-2 and ZnO-3.

• Journal of Nutrition and Health
• /
• v.39 no.8
• /
• pp.733-741
• /
• 2006

The study was conducted to investigate the effects of dietary calcium and soy isoflavone on body fat and lipid metabolism in high fat-induced obesity. Four week old female C57/BL6J mice, known as a good model of diet-induced obesity, were fed low Ca and high fat diet for 6 weeks. After induced obesity, mice were divided into six groups according to diets varying calcium contents (0.1 or 1.5%) and genistein contents (0 or 500 or 1,000 ppm). Body weight, fat pad (perirenal fat and parameterial fat), adipocyte size, serum total lipid and total cholesterol were significantly decreased by both high Ca intake and genistein supplementation. However, the effect of genistein supplementation showed in low Ca-fed groups. Serum LDL-cholesterol and TG were significantly decreased by high Ca intake and genistein supplementation, respectively. In liver, lipogenic enzymes (fatty acid synthase and malic enzyme) activity and TG were significantly decreased by both high Ca intake and genistein supplementation. This inhibitory effect of genistein on lipogenic enzymes showed in low Ca-fed groups. But liver total cholesterol and total lipid were significantly decreased by high Ca intake and genistein supplementation, respectively. Fecal excretion of total lipid, total cholesterol and TG were significantly increased by high Ca intake, not by genistein supplementation. In conclusion, high calcium intake and genistein supplement may be beneficial for suppression of obesity through direct anti-adipogenesis by decreasing fat weight and size and indirect anti-lipo-genesis by inhibiting lipogenic enzymes activity and improving lipid profile.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.49-61
• /
• 2011

This paper presents the applicability of rheological models for describing fine-laden debris flows and analyzes the flow characteristics as a function of grain size. Two types of soil samples were used: (1) clayey soils - Mediterranean Sea clays and (2) silty soils - iron ore tailings from Newfoundland, Canada. Clayey soil samples show a typical shear thinning behavior but silty soil samples exhibit the transition from shear thinning to the Bingham fluid as shear rate is increased. It may be due to the fact that the determination of yield stress and plastic viscosity is strongly dependent upon interstructrual interaction and strength evolution between soil particles. So grain size effect produces different flow curves. For modeling debris flows that are mainly composed of fine-grained sediments (<0.075 mm), we need the yield stress and plastic viscosity to mimic the flow patterns like shape of deposition, thickness, length of debris flow, and so on. These values correlate with the liquidity index. Thus one can estimate the debris flow mobility if one can measure the physical properties.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.93-98
• /
• 2007

The air velocity flowing in inner combustion chamber of SCramjet is supersonic and the time of its stay is very short as a few milliseconds. Within this short time, fuel injection， air-fuel mixing, and combustion process should be accomplished. Several methods are suggested for mixing enhancement. Among these, cavity is selected to study for mixing characteristics. The numerical simulation is performed in the case of freestream Mach number of 2.5 and cavity located in front of fuel jet injection. 3 different sized cavities of the same length-height ratio were used in order to recognize the effect about cavity size. Also, the case without cavity was analyzed to find the effect of cavity. Used code compared with the result of experiment under identical conditions and it was verified. Through this comparison and verification, mixing enhancement by cavity size could be confirmed.

• Geotechnical Engineering
• /
• v.13 no.5
• /
• pp.45-58
• /
• 1997

In this paper the factors developing ground disturbance with the penetration of PDB mandrels are analysed by using field reconnaissance and laboratory test. In the laboratory tests, the amount of smear zones around the PDB mandrels is compared with respect to the shape and the size of mandrels by penetrating model mandrels of various shapes into the reconstituted clay. The shapes of mandrels selected are circular, oval and rectangular. It was recognized from the field reconnaissance that the size and shape, driving techniques of mandrels, as well as the size and shape of anchor shoe could develop ground disturbance. The mandrels that would reduce the smear effect of clay is oval and rectangular shapes rat her than circular one. It was found that the smear effect becomes smaller as the ratio of the long and short edge of the rectangular shape mandrel becomes larger.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.379-384
• /
• 2006

Since the monolithic ceramic substrate was introduced for automotive catalytic converters, the durability of the substrate has been a continuing requirement to reduce the emission gas of vehicle. The substrate can occupy a volume as small as 82 $cm^3$ and as large as 8200 $cm^3$ to provide the required substrate for catalytic activity. The long-term durability varies with the size of the substrate from manufacture's point of view. Therefore This study presents that the response surface model using central composite design can explain size effect on the modulus of rupture in a cordierite ceramic monolithic substrate.

• Transactions of Materials Processing
• /
• v.11 no.2
• /
• pp.138-146
• /
• 2002

This paper is concerned with the simulation-based process design method involved non-steady state problem of tension levelling considering the elasto-plastic hardening behavior of a metallic strip by a commercial code ABAQUS/Standard. The tension levelling process is peformed to elongate the strip plastically in combination of tensile and bending strain by a controlled manner so that all longitudinal fibers in the strip have an approximately equal amount of length and undesirable strip shapes are corrected to the flat share. Objectives of this paper are the development of a general method for the design of a tension leveller by a finite element method and parameter studies for the deisgn variables such as the applied tension, the roll intermash includes the determination of the steady state using the simple unit of the tension levelling line and the effect of the finite element mesh size on the amount and distribution of the strain calculated. The analysis provides the information about the intermesh effect on the amount and final shapes of the strip and distribution of the strain in order to determine the amount elongation for correction of the irregular share.