• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.419-425
• /
• 2008

In previous study, it was reported that the anomalous skin effect should be considered in the low pressure condition(<10 mTorr). However there is the problem that the filament type antenna model of which size is 0 makes the non-physical phenomena that the electric field at the antenna point is infinite. Therefore, in this work, using the surface current model the electric field in antenna region is calculated and compared with the case of filament type antenna model in various conditions.

• Structural Engineering and Mechanics
• /
• v.66 no.2
• /
• pp.173-183
• /
• 2018

This paper proposes a developed optimization model for steel frames with semi-rigid beam-to-column connections and fixed bases using teaching-learning-based optimization (TLBO) and genetic algorithm (GA) techniques. This method uses rotational deformations of frame members ends as an optimization variable to simultaneously obtain the optimum cross-sections and the most suitable beam-to-column connection type. The total cost of members plus connections cost of the frame are minimized. Frye and Morris (1975) polynomial model is used for modeling nonlinearity of semi-rigid connections, and the $P-{\Delta}$ effect and geometric nonlinearity are considered through a stepped analysis process. The stress and displacement constraints of AISC-LRFD (2016) specifications, along with size fitting constraints, are considered in the design procedure. The developed model is applied to three benchmark steel frames, and the results are compared with previous literature results. The comparisons show that developed model using both LTBO and GA achieves better results than previous approaches in the literature.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.8
• /
• pp.335-343
• /
• 2021

This paper investigates the effect of institutional quality on FDI inflows by using FDI outflows from Asian countries from 2009 to 2017. We used the FDI data from five major Asian economies, which are South Korea, China, Japan, Singapore, and Hong Kong. The gravity model was used to examine the effect of institutional quality on FDI flows. The regression model considers several independent variables, and we select the most appropriate variables by using the Bayesian Model Averaging (BMA) estimator. We have shown that foreign direct investment from Asian countries depends on the size of home and the partner countries, geographical distance, trade interaction between two countries, economic freedom, labor supply, tariff rate, and capacity of the government. The results of different estimation techniques emphasize that multinational enterprises prefer to invest in those countries which have a higher income, which shows the evidence for Lucas's paradox. The results also show that economic freedom and control of corruption have a positive impact on FDI inwards. The regression results show that better institutional quality in host countries encourages more FDIs from Asian economies. It suggests that the state should control corruption and create a free economic environment to attract FDIs.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.132-142
• /
• 1996

This paper presents a technique to model and control a manipulator which has a flexible link and moves in a vertical plane. The flexible link is modeled as an Euler-Bernoulli Beam. Elastic deformation of the flexible link is represented using the assumed modes method. A comparison function which satisfies all geometric and natural boundary conditions of a cantilever beam with an end mass is used as an assumed mode shape. Lagrange's equation is utilized for the development of a discretized model. This paper presents a simple technique to improve the correctness of the developed model. The final model including the shortening effect due to elastic deformation correlates very well with experimental results. The free body motion simulation shows that two assumed modes for the representation of the elastic deformation is proper in terms of the model size and correctness. A control algorithm is developed using PID control technique. The proportional, integral and derivative control gains are determined based on dominant pole placement method with a rigid one-link manipulator. A position control simulation shows that the control algorithm can be used to control the position and residual oscillation of the flexible one-link manipulator effectively.

• Korean Journal of Child Education & Care
• /
• v.19 no.3
• /
• pp.1-12
• /
• 2019

Objective: This study aims to thoroughly analyze the correlation effect size between domestic violence and school violence by meta-analyzing previous studies on the correlation between school and domestic violence. Methods: For this purpose, meta-analysis was performed on the selected research material, which consists of national research data collected from various databases from 2001 to April, 2019. 16 thesis and 9 papers on the correlation between school and domestic violence were selected. A random effect model analysis based on the homogeneity examination results was performed on the selected data. Results: The results showed, just as Cohen (1977) proposed, that the correlation effect size between domestic and school violence was 0.25, which is moderate. This is a somewhat lower number than the previous studies on the same subject presented. Of the sub-categories of domestic violence, physical violence and psychological violence appeared to have a correlation effect size of 0.34 and 0.28, respectively, with physical violence showing the highest correlation effect size. Of the types of domestic violence, witnessing spouse violence and experiencing neglect appeared to have a moderate correlation size effect of 0.24. All of these results were statistically significant. Conclusion/Implications: This study utilized meta-analysis as a comprehensive and systematic method to analyze the correlation effect between domestic and school violence. The results presented may lead to discussions on the subject's social implications, limits, and propositions for future studies.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.413-417
• /
• 2004

Recent experiments have shown the 'size effects' in micro/nano scale. But the classical plasticity theories can not predict these size dependent deformation behaviors because their constitutive models have no characteristic material length scale. The Mechanism - based Strain Gradient(MSG) plasticity is proposed to analyze the non-uniform deformation behavior in micro/nano scale. The MSG plasticity is a multi-scale analysis connecting macro-scale deformation of the Statistically Stored Dislocation(SSD) and Geometrically Necessary Dislocation(GND) to the meso-scale deformation using the strain gradient. In this research we present a study of nano-indentation by the MSG plasticity. Using W. D. Nix and H. Gao s model, the analytic solution(including depth dependence of hardness) is obtained for the nano indentation , and furthermore it validated by the experiments.

• Environmental Engineering Research
• /
• v.14 no.2
• /
• pp.102-110
• /
• 2009

Application of artificial intelligence (AI) approaches in eco-environmental modeling has gradually increased for the last decade. Comprehensive understanding and evaluation on the applicability of this approach to eco-environmental modeling are needed. In this study, we reviewed the previous studies that used AI-techniques in eco-environmental modeling. Decision Tree (DT) and Artificial Neural Network (ANN) were found to be major AI algorithms preferred by researchers in ecological and environmental modeling areas. When the effect of the size of training data on model prediction accuracy was explored using the data from the previous studies, the prediction accuracy and the size of training data showed nonlinear correlation, which was best-described by hyperbolic saturation function among the tested nonlinear functions including power and logarithmic functions. The hyperbolic saturation equations were proposed to be used as a guideline for optimizing the size of training data set, which is critically important in designing the field experiments required for training AI-based eco-environmental modeling.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.169-172
• /
• 2002

Recently, the application of 3-roll mill is increasing, because of its flexibility in spread control and stand arrangements due to its compact size. But deformation characteristics and microstructural change in the process is not well known. In this study, austenite grain size (AGS) predictions were made by isothermal FE analyses and a microstructure model available in the literature. From this study, the effect of draught on the AGS characteristics was analyzed based on the divided zones of two major recrystallization behaviors.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.205-208
• /
• 2001

Localized shear band is investigated through the analysis of one-dimensional model for simple shearing deformation of thermally rate dependent material. Generally mesh size or interval of nodes play an important role in determining the overall flow behavior of the material. In order to observe these size effects we adapted non-local theory by including higher order strain gradients of the equivalent strain into the constitutive equation for the flow stress. for the ease of convergence and numerical stability the inplicit finite difference scheme is employed.

• Journal of Surface Science and Engineering
• /
• v.28 no.3
• /
• pp.164-173
• /
• 1995

Based on the potential-theory model for secondary current distribution, we could predict the thickness distributions of electroplating on patterned substrates with the different size of the auxiliary electrode. The substrates contain lithographic patterns at each sample geometry. Each sample geometry had different current distribution at the same condition except the size of the auxiliary electrodes. The size effect of the auxiliary electrode on thickness distribution of electrodeposition on patterned electrode was investigated in a series of experiments. Copper was galvanostatically deposited from an acid-sulfate solution in a reciprocating paddle cell. The thickness distributions of the workpiece scale measured by profilometry across the specimen were in good agreement with the current distribution predicted by boundary element method.