• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.103-107
• /
• 2002

The 2nd forming process of flanging/hemming has recently many interest because it determines external quality of automobile. It is difficult to apply finite element simulation in flanging/hemming due to small element size which needs for expression of bending effect on the die corner and big model size of side door, back door, tank lid and like opening Parts. This paper shows the process of flanging/hemming simulation using finite element model for automotive panels. The explicit finite element program PAM-STAMP$\^$TM/ was used to simulate the flanging and hemming operations.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2214-2219
• /
• 2008

The thermal contact resistance(TCR) of nanosized contact spots has been investigated through a multiscale analysis which considers the resolution of surface topography. A numerical simulation is performed on the finite element model of rough surfaces. Especially, as the contact size decreases below the phonon mean free path, the size dependent thermal conductivity is considered to calculate the TCR. In our earlier model which follows an elastic material, the TCR increases without limits as the number of nanosized contact spots increases in the process of scale variation. However, the elastoplastic contact induces a finite limit of TCR as the scale varies. The results are explained through the plastic behavior of the two contacting models. Furthermore, the effect of air conduction in nanoscale is also investigated.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.6
• /
• pp.487-493
• /
• 1990

A complete potential profile of an electrical double layer is calculated from a distribution function of charged particles based upon a model where the effect of a charged electrode and the finite size of ion are explicitly included. Electrons which are distributed on the electrode surface are assumed not to penetrate the electrode/electrolyte boundary. Formation of the constant density regions and their effects on potential and the electrical double layer capacitances are studied in great detail. The distribution of surface electrons as well as the constant density regions are found to be essential in characterizing the electrical double layer. The introduction of the ion size into the prior electrical double layer model of an ideally polarizable electrode/point charged electrolyte system, shows a great improvement in its characteristics mostly at negative potential region.

• Wind and Structures
• /
• v.27 no.6
• /
• pp.431-438
• /
• 2018

This paper presents a free vibration analysis of size-dependent functionally graded (FG) nanobeams with all surface effects considerations on the basis of modified couple stress theory. The material properties of FG nanobeam are assumed to vary according to power law distribution. Based on the Euler-Bernoulli beam theory, the modeled nanobeam and its equations of motion are derived using Hamilton's principle. An analytical method is used to discretize the model and the equation of motion. The model is validated by comparing the benchmark results with the obtained results. Results show that the vibration behavior of a nanobeam is significantly influenced by surface density, surface tension and surface elasticity. Also, it is shown that by increasing the beam size, influence of surface effect reduces to zero, and the natural frequency tends to its classical value.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.15-29
• /
• 2015

This study analyzes the mechanism that explains how various service quality factors are related to consumer satisfaction when plus-size and regular-size women are engaged in fashion shopping. We constructed and tested service quality- perceived value-satisfaction model with size as a control variable. We defined plus-size women as those with a BMI over 25 and regular-size women below 25. Data were collected during April and May, 2012 and responses from 189 plus-size women and 246 regular-size women were used in the final analysis. The results are as follows. First, among service quality factors, attention was significantly related to perceived service value for both plus-size women and regular-size women. However, store facilities were significantly related to perceived service value for only plus-size women and kindness was significantly related to perceived service value only in the case of regular-size women. Second, perceived service value was significantly related to product satisfaction and service satisfaction for plus-size women and regular- size women. However a moderating effect was found between the groups where the influences of perceived service value on product satisfaction and service satisfaction in the case of plus-size women were greater than regular-size women. Third, in the case of regular-size women, service satisfaction was positively affected by product satisfaction. However, the relationship between them was not found in the case of plus-size women.

• Korean Journal of Agricultural Science
• /
• v.20 no.2
• /
• pp.221-236
• /
• 1993

Economic conditions of Korean agriculture have been aggravated since farmers experienced the shortage of labor, instability of farm product price, lack of capital and pressure of opening domestic market. Nevertheless, agriculture must be maintained because structure of national economy can not be progressed without balanced growth of food industry. So the problem that we must solve is to keep agriculture competitive. In that case technology is important in terms of improving productivity, overcoming labor shortage and stabilizing price. This paper is to study the technology adoption on the farm level, focusing on the theories of technology adoption, their empirical test and effect of technology adoption on the farm household income. In this study five theories-independent model, linear model, middle class conservation model, modified middle class conservation model, basic needs and wealfare model- were introduced concerning differentiated technology adoption rate by farmers' class. Based on the survey of controlled strawberry farming in Nonsan County, Chungnam Province, who adopted six kinds of technology, modified middle class conservation model was found to explain five kinds of technology adoption pattern and linear model was useful to explain one kind of technology, that is, irrigation method, These results may mean that controlled strawbary cultivators of middle class were reluctant to accept new technology. There are many variables to effect on the technology accepting rate, that is, farmer's age, labor capacity, education level, cultivation career, size of total cultivated land, and size of strawberry farming land. LOGIT model was used to find which variable influence the technology adoption rate. Results of estimation showed that variables of cultivation career and total land size, of which coefficients were statistically significant at the 5 percent level, might be main influential factors in accepting more than three farming techniques. There was a significant income difference between farm households accepting new methods and those rejecting them. Especially in case of low class of farming group, income of farmers who was adopting new technology was examined to be much higher than that of farmers who did not adopt. This result suggests that new technology play an important role in increasing farm household income. Finally this study emphasized that there is a need to develop proper measure of technology transfer considering various socioeconomic conditions of farm households.

• Korean Journal of Social Welfare
• /
• v.66 no.1
• /
• pp.251-276
• /
• 2014

This study scrutinizes the common sense in the field of disability employment that the bigger the size of a firm, the lower the employment rate of people with disabilities. This common sense has been established by conventional cross-tabulation and multiple regression analyses without taking into account possible interactions between the sizes of firms and the industries in which they operate. This study shows that the distribution of the disability employment rate violates the linearity and homoscedasticity assumptions of the OLS. In an effort to find models that explain the data better, this study fits the OLS model, the weighted linear regression model, and the multinomial logit model as well as the path analysis which is meant to examine the relationships between firm size and other variables relevant to disability employment. The result shows that, when an interaction term between firm size and industry is added to the model, firm size does not have any significant effect on disability employment rate for those firms with 100 or more regular employees, to the contrary of the findings of prior studies. It also demonstrates that other factors such as job setting, the extent of helpfulness of disability employment employers perceive, employers' care for disability, and employers' awareness of disability policies may matter more than does firm size. This study proposes that future research and policy implementation for disability employment should pay no less attention to industry and other factors mentioned above than to firm size.

• The Korean Journal of Physiology and Pharmacology
• /
• v.23 no.5
• /
• pp.329-334
• /
• 2019

Diabetes is associated with an increased risk of cardiovascular complications. Dipeptidyl peptidase-4 (DPP-IV) inhibitors are used clinically to reduce high blood glucose levels as an antidiabetic agent. However, the effect of the DPP-IV inhibitor gemigliptin on ischemia/reperfusion (I/R)-induced myocardial injury and hypertension is unknown. In this study, we assessed the effects and mechanisms of gemigliptin in rat models of myocardial I/R injury and spontaneous hypertension. Gemigliptin (20 and 100 mg/kg/d) or vehicle was administered intragastrically to Sprague-Dawley rats for 4 weeks before induction of I/R injury. Gemigliptin exerted a preventive effect on I/R injury by improving hemodynamic function and reducing infarct size compared to the vehicle control group. Moreover, administration of gemigliptin (0.03% and 0.15%) powder in food for 4 weeks reversed hypertrophy and improved diastolic function in spontaneously hypertensive rats. We report here a novel effect of the gemigliptin on I/R injury and hypertension.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.221-227
• /
• 2019

One of the important requirements for the application of reduced activation ferritic/martensitic steel is to retain proper mechanical properties in irradiation and high temperature conditions. In order to simulate the impact toughness with the effect of temperature and irradiation, a simulation model based on energy balance method consisted of crack initiation, plastic propagation and cleavage propagation stages was established. The effect of temperature on impact toughness was analyzed by the model and the trend of the simulation results was basicly consistent with the previous experimental results of CLAM steels. The load-displacement curve was simulated to express the low temperature ductile-brittle transition. The effect of grain size and inclusion was analyzed by the model, which was consistent with classical experiment results. The transgranular-intergranular transformation in brittle materials was also simulated.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.226-234
• /
• 2004

This work presents a deterministic channel that rules according to inverse a power propagation law. The proposed channel model allows us to derive the lower bound and upper bound of packet's capture probability in Rayleigh fading and shadowing cellular mobile system. According to these capture probabilities, we analyze the system performance in the case of finite stations and finite communicated coverage of a base station. We also adopted a dynamic backoff window size to discuss the robustness of IEEE 802.11 draft standard. Some suggestions and conclusions from numerical results are given to establish the more strong CSMA/CA protocol.