• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.161-169
• /
• 2020

This study investigated the effects and relationships of various stress, school life adjustment and happiness factors among middle school and high school adolescents. The structural model group effects between boy and girl groups were also investigated. Data was employed from the 'Korean Children and Youth Well-Being Index Survey, 2018' while subjects of the analysis included 5,144 students. Based on the education statistics data, the sample was collected by probability proportional to size. Results utilizing structural equation modeling and multigroup analysis showed that first, school stress, friend stress, and look stress had significant effects on adolescent happiness. School life adjustment had positive significant effects on adolescents' happiness. Parent stress, money stress and school stress had significant effects on school life adjustment. Second, the mediating effect of school life adjustment between stress and happiness was significant with parent, school stress, and financial stress. Third, results of the multi-group analysis by level and gender showed that the structure was similar between boys and girls, with the only differences among mediating effects. Boys had significant mediating effects by school stress, and financial stress, while girls had significant mediating effects by school stress, financial stress, and parent stress. Finally, based on the results of the study, practice and policy implications were suggested to support the promotion of adolescents' happiness.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.55-65
• /
• 1986

The resistance to the passage of airflow through various agricultural products is an important consideration in the design of an aeration or drying system. The amount of resistance to airflow varied widely from one kind of grain to another, and depended upon airflow rate, surface texture and shape of the particles, the size and configuration of voids, and foreign and fine material in the grain bed. The airflow rate was the major factor considered on this kind of study in the early stages. But these days, the studies on the resistance to airflow of grain affected by grain moisture content and foreign and fine material have been widely carried out. However the foreign an fine material in the grain bed could not be a major factor on the study in Korea because there were only a few grain process procedure after harvesting it. The objectives of this study were to investigate the effect of moisture content and airflow rate on airflow resistance to grain, and to develop a model to predict the static pressure drop across the grain bed as a function of moisture content and airflow rate. The rough rice varieties, Akibare, Milyang 15 (Japonica types), Samkwang, Backyang (Indica types)and covered barley variety, Olbori, which were harvested in 1985 were used in the experiment after cleaning them. Resistances to airflow of grain were investigated at four levels of moisture content (13-25%, wb.) for ten different airflow rates($0.01-0.15m^3/sm^2$). The results of this study are summarized as follows; 1. Theaverage bulk densities were $585.3kg/m^3$ for rough rice and $691.6kg/m^3$ for barley at the loose fill, and were $648.8kg/m^3$ for rough rice and $758.2kg/m^3$ for barley at the packed fill. The pressure drops at the packed fill beds were approximately 1.4 to 1.8 times higher than those at the loose fill beds. 2. The pressure drops across grain beds deceased with the increase of moisture content and increased with airflow rate. The decreasing rates of pressure drop across grain beds according to the moisture contents at the lower airflow rates were higher than those at the higher airflow rates, and the increasing rates of pressure drop according to the airflow rates at the lower moisture contents were higher those at higher moisture contents. 3. The pressure drop across barley bed were much higher than rough rice beds and the pressure drops across Japonica type rough rice beds were a little higher than Indica type. 4. The mathematical models to predict the pressure drop across grain beds as a function of moisture content and airflow rate were developed from these experiments.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• KSBB Journal
• /
• v.18 no.3
• /
• pp.190-196
• /
• 2003

An analytical system detecting DNA particularly utilizing a concept of membrane strip chromatography initially applied to home-version tests for, such as, pregnancy and ovulation has been developed. We have chosen S. typhimurium as model analyte among food-contaminating microorganisms that occurred in high frequencies, and invA gene, as a detection target, specific to Salmonella species. This gene was able to be amplified by PCR under optimal conditions employing newly designed primers in our laboratory. The PCR product was specifically measured via hybridization between the analyte and a DNA probe, which was a totally different feature from the conventional gel electrophoresis detecting the products based only on the molecular size. It is notable thar the DNA probe sequence was specially designed such that no separation of excess primers present after PCR was required. This was immobilized on a nitrocellulose (NC) membrane via streptavidin-biotin linkage minimizing a steric effect when the hybridization with the amplified DNA took place. The analyrical system detected the microorganism in a concentration of minimum $10^3$ cfu/mL (i.e., 10 cells per system), estimated from the standard curve, 20 to 40 minutes after adding the sample. This sneitivity was approximately 10 times higher than that of gel electrophoresis as an analytical tool conventionally used. Furthermore, the assay was able to be run at room temperature, which would ofter an extra advantage to users.

• Korean Journal of Materials Research
• /
• v.21 no.10
• /
• pp.573-579
• /
• 2011

Highly textured Ag, Al and Al:Si back reflectors for flexible n-i-p silicon thin-film solar cells were prepared on 100-${\mu}m$-thick stainless steel substrates by DC magnetron sputtering and the influence of their surface textures on the light-scattering properties were investigated. The surface texture of the metal back reflectors was influenced by the increased grain size and by the bimodal distribution that arose due to the abnormal grain growth at elevated deposition temperatures. This can be explained by the structure zone model (SZM). With an increase in the deposition temperatures from room temperature to $500^{\circ}C$, the surface roughness of the Al:Si films increased from 11 nm to 95 nm, whereas that of the pure Ag films increased from 6 nm to 47 nm at the same deposition temperature. Although Al:Si back reflectors with larger surface feature dimensions than pure Ag can be fabricated at lower deposition temperatures due to the lower melting point and the Si impurity drag effect, they show poor total and diffuse reflectance, resulting from the low reflectivity and reflection loss on the textured surface. For a further improvement of the light-trapping efficiency in solar cells, a new type of back reflector consisting of Ag/Al:Si bilayer is suggested. The surface morphology and reflectance of this reflector are closely dependent on the Al:Si bottom layer and the Ag top layer. The relationship between the surface topography and the light-scattering properties of the bilayer back reflectors is also reported in this paper.

• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.330-339
• /
• 1983

The CNDO/2 and STO-3G calculations were performed on nitrogen, oxygen, and sulfur compounds in order to examine the effect of interactions between two nonbonding (n) orbitals in the same molecule separated by N intervening $\sigma$ bonds based on the PMO approach. Calculated basis level energies, energy splittings, and interaction energy changes for both chain and cyclic model compounds were qualitatively compared with the corresponding predictions derived from perturbational formalism for n-n orbital interactions and successfully explained in terms of the derived energy expressions. In general, through-space interaction term could be neglected in the N and O systems. And the calculated results were explained simply by through-bond interaction term. As a result, through-bond interaction placed n- below n+ for odd systems and n+ below n- for even systems. Also energy splittings in odd systems were larger than those in even systems. However, in the cases of cis-ethylene diamine and o-phenylene diamine(conformer VI in Table 4), through-space interaction term was found to be substantial and the opposing effects of through-space and through-bonds interactions were observed. Finally it was found that the interactions between two n orbitals on S atoms always had some contribution of the destabilizing through-space interaction term. This result was consistent with the fact that the lone pair lobes of third elements were larger in size than those of the second period elements.

• Fire Science and Engineering
• /
• v.25 no.6
• /
• pp.32-38
• /
• 2011

As the using rate of an explosive gas has been increased in the industrial site, the regional residents adjacent to the site as well as the site workers have frequently fallen into a dangerous situation. Damage caused by accident in the process using hydrogen gas is not confined only to the relevant process, but also is linked to a large scale of fire or explosion and it bring about heavy casualties. Therefore, personnel in charge should investigate the kinds and causes of the accident, forecast the scale of damage and also, shall establish and manage safety countermeasures. We, in Anti-Calamity Research Center, forecasted the scope of danger if break out a fire or/and explosion in hydrogen gas facilities of MLCC firing process. We selected piping leak accident, which is the most frequent accident case based on an actual analysis of accident data occurred. We select and apply piping leak accident which is the most frequent case based on an actual accident data as a model of damage forecasting scenario caused by accident. A jet fire breaks out if hydrogen gas leaks through pipe size of 10 mm ${\Phi}$ under pressure of 120 bar, and in case of $4kw/m^2$ of radiation level, the radiation heat can produce an effect on up to distance of maximum 12.45 meter. Herein, we are going to recommend safety security and countermeasures for improvement through forecasting of accident damages.

• Phonetics and Speech Sciences
• /
• v.12 no.3
• /
• pp.25-32
• /
• 2020

An analysis of emotional English utterances with 7 emotions (calm, happy, sad, angry, fearful, disgust, surprised) was conducted using the measurement of prosodic distance between 672 emotional and 48 neutral utterances. Applying the technique proposed in the automatic evaluation model of English pronunciation to the present study on emotional utterances, Euclidean distance measurement of 3 prosodic elements such as F0, intensity and duration extracted from emotional and neutral utterances was utilized. This paper, furthermore, extended the analytical methods to include Euclidean distance normalization, z-score and z-score normalization resulting in 4 groups of measurement schemes (sqrF0, sqrINT, sqrDUR; norsqrF0, norsqrINT, norsqrDUR; sqrzF0, sqrzINT, sqrzDUR; norsqrzF0, norsqrzINT, norsqrzDUR). All of the results from perceptual analysis and acoustical analysis of emotional utteances consistently indicated the greater effectiveness of norsqrF0, norsqrINT and norsqrDUR, among 4 groups of measurement schemes, which normalized the Euclidean measurement. The greatest acoustical change of prosodic information influenced by emotion was shown in the values of F0 followed by duration and intensity in descending order according to the effect size based on the estimation of distance between emotional utterances and neutral counterparts. Tukey Post Hoc test revealed 4 homogeneous subsets (calm

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.116-126
• /
• 2008

In gas hydrate survey, seismic amplitude and frequency characteristics play a very important role in determining whether gas hydrate exists. According to the variation of source frequency and scatterer size, we study seismic amplitude characteristics using elastic modeling applied at staggered grids. Generally speaking, scattering occurs in proportion to the square of source frequency and the scatterer volume, which has an effect on seismic amplitude. The higher source frequency is, the more scattering occurs in gas hydrate bearing zone. Therefore, BSR is hardly observed in high frequencies. On the other side, amplitude blanking zone and BSR is clearly observed in lower frequencies although the resolution is poor as a whole. Seismic reflections traveling through free-gas layer below gas hydrate bearing zone decay so severely a high frequency component that a low frequency term is dominant. Amplitude anomaly of BSR result from high acoustic impedance contrast due to free-gas, which is a very crucial factor to estimate gas hydrate bearing zone. Seismic frequency analysis is carried out using wavelet transform method that frequency component could be decomposed with time variation. In application of wavelet transform to the seismic physical experiments data, we can observe that reflections traveling through air layer, which corresponds to the free-gas layer, decay a high frequency component.

• The Research Journal of the Costume Culture
• /
• v.12 no.4
• /
• pp.648-662
• /
• 2004

These days fashion market is overflown with many brands and their identities are not so clear that the advertisement emphasizing the characteristics of the products don＇t seem to be adequate in appealing the customers. Therefore it is required that the sensible image advertisement which appeals to the customers by stimulating their feeling and sensitivity to attract customer＇s interest. At that point, VMD especially of POP advertisement that can be attract direct purchasing plays an important part to build up the accurate image of brand to consumers. Even thought today＇s individualized consumers take much interested in the fresh and original expressions, the visual expressions of fashion advertisements still focus on using photographs. The most advertisement of photograph has a limit that it shows only an immediate fraction, so it can＇t present whole image It can deliver more- imaginations and message than photograph if fashion illustration is used in advertisement. Therefore the purpose of this study was to present the application of fashion illustration for the POP advertisement Twelve pieces of fashion illustrations were produced and classified three parts according to their images and expression techniques. Paper sculpture techniques were applied for fashion image expression, for paper is easily meet daily life and ecological materials. For study procedure and contents, the concept and useful functions of fashion illustration and the concept of paper sculpture were examined as a theoretical background, and various uses and techniques of paper sculpture by analysing a number of paper sculpture art works were also studied. Also the concept, roles and functions of POP advertisement were discussed, and then the examples that the fashion illustration applied in the advertisement were analyzed through case study. The theme of my works was jean fashion brand whose brand image is significant, Twelve pieces of fashion illustrations using paper sculpture techniques were produced and various kinds of paper were used in expressing the paper sculpture technique. Each works were cut out the forms and used a pertinent light for making cubic effect shadow when displayed them. In my works Ⅰand Ⅱ, Ⅰ illustrated jeans in two images of sexy and casual, these were created slightly bigger than actual body size in order to attract consumer＇s gaze at show window or store. In my works Ⅲ, Ⅰ illustrated part or model of a jean product so that it could be used as addition to main display.