• Journal of the Korean Association of Geographic Information Studies
• /
• v.4 no.4
• /
• pp.39-50
• /
• 2001

There has been considerable controversy over the changes in the size of the beaches in the Pusan area; any loss of beach area will have an immense effect on the tourism industry, which is an important source of income for the local economy. The best beaches in Korea are in the Pusan area and were visited by more than 8 million persons in 2000. It is expected that the number of visitors, drawn to the scenic vistas and convenient facilities of this area, will increase annually. Any loss in the size of these swimming beaches will have an important negative effect on tourism income. Therefore, the local governments have gone to great lengths to preserve these beaches, transporting tens of thousands of tons of sand to the beaches before they open each year at a cost of billions of won annually. In this study, we analyzed aerial photographs and tide data for the past 50 years using digital aerial photo analysis and GIS techniques for each 3-year interval. We abstracted beach DEM (digital elevation model) and ortho aerial photographs, and conducted a space analysis. As a result, we were able to identify changes in the area and width of sections of Haeundae Beach.

• International Journal of Highway Engineering
• /
• v.6 no.2 s.20
• /
• pp.1-13
• /
• 2004

This study dealt with size effect of specimen in measuring deformation strength and estimating rut resistance of asphalt concretes under static loading using Kim test. Two aggregates, a normal asphalt (pen 60-80) and 6 polymer-modified asphalt (PMA) binders were used for preparation of 14 dense-graded mixtures. Mixtures were prepared based on optimum asphalt content by Marshall compactor (S= 10cm) and gyratory compactor (S= 15cm) for Kim test and for wheel tracking test. In statistical analysis by general linear model (GLM) procedure of SAS, the diameter of specimen was found not to be a significant factor that affect the Kim test result. Therefore, it was found that either loom-diameter or 15cm-diameter of specimen gave no significant difference in deformation strength ($K_D$) values in Kim test for any aggregate mixture. However, the thickness of specimen was found to be a significant factor in determining $K_D$. It is estimated that $K_D$ is a function of y, vertical deformation, and y has something to do with thickness of specimen. Therefore, it is suggested that the thickness of specimen should not be higher than 6.6cm, and the correction factor depending on the thickness value should be developed in the future study.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.469-480
• /
• 2017

On April 1, 2004, KTX (Korea Train eXpress), the first HSR (High-Speed Rail) in Korea, was introduced to Gyeongbu Line. The introduction of the KTX service led to a change in the number of passengers for Gyeongbu Line. Previous studies have analyzed the pre and post-event changes of the intervening events by either simple statistics or intervention ARIMA analysis. However, the intervention ARIMA model has a limitation that several assumptions such as the occurrence time and the type of intervention events are necessary. To this end, this study analyzed the effects of intervention event on the number of passengers using the Gyeongbu line based on a time series outlier detection technique which can overcome limitations in the previous studies. The time series outlier detection technique can analyze the time, effect type and size of an intervention event without the assumption of the time and effect type of the intervention event. The data were collected from the Korea Transport Database (KTDB) for twelve years from 2003 to 2014 (144 months). The analysis results showed that the size of the influence type in the same intervention events was different across the major city routes, and the intervention event which could not be found by previous study methods was also found.

• The Journal of Korean Medicine
• /
• v.33 no.3
• /
• pp.184-199
• /
• 2012

Objectives: There is a steady increase in the prevalence of obesity worldwide and obesity is often accompanied by inflammation. Although much emphasis has been placed on the adipose tissue inflammation in obesity, a study with herbal medicine is few. This study aimed to investigate the antidiabetic and anti-inflammatory effect of a complex herbal medicine (CHM) composed of Cornus officinalis, Dioscorea rhizoma, Aurantii fructus, and Mori Foliumon on obese type 2 diabetes mice. Methods: Type 2 diabetes mellitus and obesity were induced by Surwit's high fat, high sucrose diet for 8 weeks. Mice were divided into ND (normal diet, n=10), HFD (high fat and high sucrose diet, n=10), CHM (high fat and high sucrose diet with complex herbal medicine, n=10) and Met (high fat and high sucrose diet with metformin, n=10) groups. The body weight, fructosamine and OGTT (oral glucose tolerance test) were measured. After 8 weeks the blood samples of all mice were taken from the heart, and lipid profiles were measured. Epididymal fat pad, histological size of the adipocyte tissue and liver weights were measured. Inflammatory markers such as leptin and adipocyte tissue macrophage were measured to evaluate the effect of CHM on adipocyte tissue inflammation. Results: Compared with the HFD group, there was an improvement in OGTT and epididymal fat decreased in the CHM group. White adipocyte size and adipocyte tissue macrophage decreased in CHM group. Conclusions: These results suggest that CHM has antidiabetic and anti-inflammatory effects in high fat, high sucrose diet induced obese mice.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.19-32
• /
• 2016

Due to the increasing fiscal burden and structural unbalanced premium/benefit costs, the new reform on the government employees pension system (GEPS) was considered even after the recent reform in 2009. This article examines the various effects of recent amendment in 2015 on GEPS using a simple probabilistic model. We consider effects on both sides, the pensioners and the government. First of all, the expected net value of pension payment for an individual employee was calculated based on the supposed survival distribution. The fairness of individual pension holders was compared using the benefit-cost ratio. Secondly, from pension system users' point of view, the default probability and the government subsidy were examined by Monte-carlo simulation. From the simulation experiment, we could see that the 2015 reform plan indeed reduces the default probability and the size of the fiscal burden of government by increasing the premium and decreasing the benefit. However, the size of the effect is not very standout at this moment because the number of new employees who are fully subject to the reform will be much smaller than the number of previous employees for a while. Thus, the effect of the reform is expected to appear in a slow manner.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.306-313
• /
• 2020

To investigate the reinforcing effects of functional fillers in nitrile rubber (NBR) materials, high-structure carbon black (HS45), coated calcium carbonate (C-CaCO3), silica (200MP), and multi-walled carbon nanotubes (MWCNTs) were used as functional filler, and carbon black (SRF) as a common filler were used for oil-resistant rubber. The curing and mechanical properties of HS45-, 200MP-, and MWCNT-filled NBR compounds were improved compared to those of the SRF-filled NBR compound. The reinforcing effect also increased with a decrease in the particle size of the fillers. The C-CaCO3-filled NBR compound exhibited no reinforcing effect with increasing filler concentration because of their large primary particle size (2 ㎛). The reinforcing behavior based on 100% modulus of the functional filler based NBR compounds was compared by using several predictive equation models. The reinforcing behavior of the C-CaCO3-filled NBR compound was in accordance with the Smallwood-Einstein equation whereas the 200MP- and MWCNT-filled NBR compounds fitted well with the modified Guth-Gold (m-Guth-Gold) equation. The SRF- and HS45-filled NBR compounds exhibited reinforcing behavior in accordance with the Guth-Gold and m-Guth-Gold equations, respectively, at a low filler content. However, the values of reinforcement parameter (100Mf/100Mu) of the SRF- and HS45-filled NBR compounds were higher than those determined by the predictive equation model at a high filler content. Because the chains of SRF composed of spherical filler particles are similarly changed to rod-like filler particles embedded in a rubber matrix and the reinforcement parameter rapidly increased with a high content of HS45, the higher-structured filler. The reinforcing effectiveness of the functional fillers was numerically evaluated on the basis of the effectiveness index (��SRF/��f) determined by the ratio of the volume fraction of the functional filler (��f) to that of the SRF filler (��SRF) at three unit of reinforcing parameter (100Mf/100Mu). On the basis of their effectiveness index, MWCNT-, 200MP-, and HS45-filled compounds showed higher reinforcing effectiveness of 420%, 70%, and 20% than that of SRF-filled compound, respectively whereas C-CaCO3-filled compound exhibited lower reinforcing effectiveness of -50% than that of SRF-filled compound.

• Korean Journal of Culture and Social Issue
• /
• v.18 no.4
• /
• pp.533-555
• /
• 2012

This study investigated the relationship of self-esteem, academic stress, social support, and parenting attitudes with depression of Korean children and adolescents using a meta-analysis. A total of 86 studies, both published and unpublished manuscripts, were included. The results showed that depression of children and adolescents were positively associated with self-esteem, social support, and functional parenting attitudes, and negatively related to academic stress. The largest effect size was found in the relationship with self-esteem, followed by the relationships with academic stress, social support, and functional parenting attitudes, all in the range between moderate and large effect size. As the analysis indicated the heterogeneity of the results, subsequent analyses were performed to test the moderating effects of instrument and age. The significant moderators were the types of instruments used to measure self-esteem, academic stress, parenting attitudes, and depression. Age was also a significant moderator.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.651-657
• /
• 2020

Fluidization processes in which solid particles vividly move like gas or liquid have been widely used in various industrial sectors, such as thermochemical energy conversion and polymerization processes for general purpose polymer resins. One of the general purpose polymer resins, LLDPE(Linear low-density polyethylene) resins have been produced in bubbling fluidized bed processes in the world. In a bubbling fluidization polymerization reactors, LLDPE particles with relatively larger particle size and low density are fluidized by hydrogen gas for polymerization reaction. Though LLDPE polymerization reactors are one of bubbling fluidization processes, slugs that have negative impact for reaction exist or occur in these processes. Therefore, the fluidization state of LLDPE particles was investigated in a simulation model similar to a pilot-scale polymerization reactor (0.38 m l.D., 4.4 m High). In particular, the effect of gas velocity (0.45-1.2 m/s), solid density (900-199 kg/㎥), solid sphericity (0.5-1.0), and average particle size (120-1230 ㎛), on bed height and fluidization state were measured by using a CPFD(Computational particle-fluid dynamics) method. With CPFD analysis, the occurrence of a flat slug was visualized. Also, the change in particle properties, such as particle density, sphericity, and size, could reduce the occurrence of slug and bed expansion.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.227-238
• /
• 2006

Line density index(LDI) was developed to quantify a densely isothermal line rate as standard index in the ocean environment. Theoretical background on the LDI development process restricting index range 0 to 100 was described. And validation test was done for the LDI application condition that total line length is not greater than 1/10 of unit area. NOAA SST(Sea Surface Temperature) data were used for the experimental application of LDI in the South Sea of Korea. Using GIS, $0.1^{\circ}C$ isothermal lines were linearized as vector data form SST raster data, and unit area were built as polygon data. For the LDI calculation, spatial overlapping(line in polygon) was implemented. To analyze the effect of unit area size for the LDI distribution, two cases of unit area size were designed and descriptive statistics was calculated including performing normality test. The results showed no change of LDI's essential characteristics such as mean and normality except for the range of value, variance and standard deviation. Accordingly, it was found that complex structure of thermal front and even smaller scale of front width than unit area size could influence on the LDI distribution. Also, correlation analysis performed between LDI and difference of temperature(${\Delta}T^{\circ}C$), and horizontal thermal gradient(${\Delta}T^{\circ}C/km$) on the front was obtained from linear regression model. This obtained value was compared with the results from previous researches. Newly developed LDI can be used to compare the thermal front regions changing spatio-temporally in the ocean environment using absolute index value. It is considered to be significant to analyze the relationship between thermal front and marine environment or front and marine organisms in a quantitative approach described in this study.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.2
• /
• pp.187-194
• /
• 2012

The strength of particle-reinforced metal matrix composites is, in general, known to be increased by the geometrically necessary dislocations punched around a particle that form during cooling after consolidation because of coefficient of thermal expansion (CTE) mismatch between the particle and the matrix. An additional strength increase may also be observed, since another type of geometrically necessary dislocation can be formed during extensive deformation as a result of the strain gradient plasticity due to the elastic-plastic mismatch between the particle and the matrix. In this paper, the magnitudes of these two types of dislocations are calculated based on the dislocation plasticity. The dislocations are then converted to the respective strengths and allocated hierarchically to the matrix around the particle in the axisymmetric finite-element unit cell model. The proposed method is shown to be very effective by performing finite-element strength analysis of $SiC_p$/Al2124-T4 composites that included ductile failure in the matrix and particlematrix decohesion. The predicted results for different particle sizes and volume fractions show that the length scale effect of the particle size obviously affects the strength and failure behavior of the particle-reinforced metal matrix composites.