• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.179.1-179
• /
• 2001

Successive image contrast enhancement was used to direct digital radiography system. This system was accurately required acquisition signal in each pixel. But, applied high electric field in a-Se thin film for x-ray conversion layer was caused to acquisition signal distortion, then bring low image contrast. The purpose of this study was to reduce the signal distortion, carried out different electrode size.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1085-1093
• /
• 2000

An efficient bit rate distribution technique that distributes available bits for multiple objects based on motion vector magnitude, size of object shape, and coding distortion is presented. This coding concept using the three parameters was exploited in MPEG-4 multiple object coding. But the scheme is likely to produce poor results such as allocating more bits to less important objects and degrading picture quality, due to the lack of analysis and research in view of human visual aspect. In this paper importance of each object is represented by the three parameters and visually analyzed. Target bits are distributed according to coding distortion using the pre-assigned shape and motion information.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.191-197
• /
• 2003

As mechanical components are miniaturized, the demand on micro die and mold is increasing. Micro mechanical components usually have high hardness and good conductivity. So micro electrical discharge machining (MEDM) is an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of cavity is distorted. Electric charges tend to be concentrated at the sharp edge. At the center of the bottom surface, debris can not be drawn off easily. These two phenomena make the bottom surface of the electrode and workpiece distort. As machining depth increases, the distorted shape of electrode approaches hemisphere. This process is affected by capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.96-102
• /
• 2012

This paper addresses photometric distortion problems of a compact 3D scanning sensor which is composed of a micro-size and inexpensive camera-projector system. Recently, many micro-size cameras and projectors are available. However, erroneous 3D scanning results may arise due to the poor and nonlinear photometric properties of the sensors. This paper solves two inherent photometric distortions of the sensors. First, the response functions of both the camera and projector are derived from the least squares solutions of passive and active calibration, respectively. Second, vignetting correction of the vision camera is done by using a conventional method, however the projector vignetting is corrected by using the planar homography between the image planes of the projector and camera, respectively. Experimental results show that the proposed technique enhances the linear properties of the phase patterns that are generated by the sensor.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.4
• /
• pp.44-48
• /
• 2005

As mechanical components are miniaturized, the demands on micro die/mold are increasing. Micro mechanical components usually have high hardness and good conductivity. Micro electrical discharge machining (MEDM) can thus be an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of the cavity is distorted. Electric charges tend to be concentrated at the sharp edge, and debris cannot be drawn off easily at the center of the bottom surface. These two phenomena make the bottom surface of electrode and workpiece distort. As machining depth increases, the distorted shape of the electrode approaches hemisphere. This process is affected by both capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• Journal of Welding and Joining
• /
• v.6 no.3
• /
• pp.21-26
• /
• 1988

The behavior of angular distortion in butt joint wleding of thin plate structure is investigated with an experimental model and partially with a computational model. The experimental model studying the effects of specimene size and degree of restraint on the angular distorion offers a good method for analyzing the behavior of the distrotion. In addition, the distrotion during welding was demonstrated by both experimental measurement and numericla prediciton. The facts evealed in this study are as follows : 1) distrotion angles were changed with variations of specimene wldth. 2) With the restraint, angular distrotion was reduced to 20% to that of free joint. 3) After the restraint being removed, the effect of restraint was also remained. 4) Same heat input per unit thickness caused same amount of distortion. 5) The mode of angular distortion was expected to be changed with expected to be changed with time, i.e. convex movement during heating and concave one during cooling.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.5
• /
• pp.747-755
• /
• 1995

When codebooks designed by a clustering algorithm using training sets, a time-averaged distortion, which is called the inside-training-set- distortion (ITSD), is usually calculated in each iteration of the algorithm, since the input probability function is unknown in general. The algorithm stops if the ITSD no more significantly decreases. Then, in order to test the trained codebook, the outside-training-set-distortion (OTSD) is to be calculated by a time-averaged approximation using the test set. Hence codebooks that yield small values of the OTSD are regarded as good codebooks. In other words, the calculation of the OTSD is a criterion to testing a trained codebook. But, such an argument is not always true if some conditions are not satisfied. Moreover, in order to obtain an approximation of the OTSD using the test set, it is known that a large test set is requared in general. But, large test set causes heavy calculation com0plexity. In this paper, from the analyses in [16], it has been revealed that the enough size of the test set is only the same as that of the codebook when codebook size is large. Then a simple method to testing trained codebooks is addressed. Experimental results on synthetic data and real images supporting the analysis are also provided and discussed.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.270-280
• /
• 2013

A fast intra-prediction method is proposed for High Efficiency Video Coding (HEVC) using a fast intra-mode decision and fast coding unit (CU) size decision. HEVC supports very sophisticated intra modes and a recursive quadtree-based CU structure. To provide a high coding efficiency, the mode and CU size are selected in a rate-distortion optimized manner. This causes a high computational complexity in the encoder, and, for practical applications, the complexity should be significantly reduced. In this paper, among the many predefined modes, the intra-prediction mode is chosen without rate-distortion optimization processes, instead using the difference between the minimum and second minimum of the rate-distortion cost estimation based on the Hadamard transform. The experiment results show that the proposed method achieves a 49.04% reduction in the intra-prediction time and a 32.74% reduction in the total encoding time with a nearly similar coding performance to that of HEVC test model 2.1.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.5
• /
• pp.626-636
• /
• 2004

The purpose of this study was to show a theoretical system of expressional area, the characteristics and the effects which is applied to fashion illustration by metaphor theory. The theoretical system of expressional area was analyzed by category analysis and 150 fashion illustrations from 1900 to 1999 were analyzed by contents analysis. The results of this study were as follows: Metaphor in fashion illustration was categorized to replacement, parody, heterogeneous combination, surrealism, magnification and reduction of size, optical illusion, juxtaposition and distortion of form. In detail, First, replacement was showed omission of form, non-object color, texture. Second, parody was showed using the part in artistic work, differentiation of original work. Third, heterogeneous combination was showed unreal body combining between animal and plant. Fourth, surrealism was showed creation of object which is impossible to present. Fifth, magnification and reduction of size was showed bizarre magnification of part of body, size of clothing. Sixth, optical illusion was showed ambiguity of object because of creation of new form. Seventh, juxtaposition was showed the parallel of contradicting idea and change of meaning between heterogeneous objects. Eighth, the distortion of form was showed grotesque distortion of part of body and disgusting object.

• The Journal of Korean Physical Therapy
• /
• v.24 no.2
• /
• pp.66-72
• /
• 2012

Purpose: The purpose of this study is to explore the importance of the image distortion correction in the cross sectional area measurement for the iliopsas muscle, tensor fasciae latae muscle, gluteus maximus muscle and the knee extensor muscles, by using (magnetic resonance imaging) MRI. Methods: This study was performed using an open 0.32T MRI system. To estimate the image distortion, T1 images for an AAPM homogeneity/linearity phantom were acquired, and the region in which the maximum geometric distortion was less than or equal to the pixel size (1.6 mm) of the images, it was defined as the distortion correction-free region. The T2 images for a human subject's pelvis and thigh in normal positions were obtained. Then, after the regions of interest in the pelvis and thigh were moved into the distortion correction-free region, T2 images for the pelvis and thigh were scanned with the same imaging parameters used in the previous T2 imaging. The cross-sectional areas were measured in the two T2 images that were obtained in the normal position, and the distortion correction-free region, as well as the area error caused by geometric image distortion was calculated. Results: The geometrical distortion is gradually increased, from the magnet center to the outer region, in axial and coronal plane. The cross-sectional area error of gluteus maximus muscle and the knee extensors was as high as 9.27% and 3.16% in before and after distortion correction, respectively. Conclusion: The cross-sectional area of the muscles that suffered from the geometrical distortion is necessary to correct for the estimation of the intervention.