• Korean Journal of Veterinary Research
• /
• v.30 no.4
• /
• pp.487-497
• /
• 1990

This study was carried out to observe in vitro effect of praziquantel on the tegumental changes of Heterophyopsis continua with scanning electron microscope. Metacercariae were collected from the perch, Lateolabrax japonicus, by artificial digestion technique and fed to 2-week old chickens. Adult worms were recovered from small intestine of chickens 8 days after infection. For working solutions, praziquantel was diluted with TC199 medium at concentration of 0.01, 0.1. 1 and $10{\mu}g/ml$. To each petri dish containing 10ml of solution, 5~10 worms were introduced and incubated at $37^{\circ}C$. For the scanning electron microscopy(SEM), the worms were fixed in cold 2.5% glutaraldehyde, dehydrated in a series of graded ethanol and freeze-dried. Dried specimen was mounted on stub and coated with gold and observed in an SEM. The results were as follows: 1. Severe tegumental alterations were recognized by scanning electron microscope. Bleb formation of tegument was observed in 5 minute group and most pronounced on anterior tegument of worms. The number and size of blebs increased as incubation time prolonged. 2. The surface destruction was more pronounced at ventral margin between the oral and the ventral suckers. 3. The sensory papillae were slightly affected, but destruction of tegumental spine was not recognized. 4. The effect of praziquantel on the worm was found dependent on the concentration and incubation time, however, the effect was more dependent upon the incubation time.

• International Area Studies Review
• /
• v.18 no.3
• /
• pp.175-201
• /
• 2014

This paper analyses the effect of R&D investment on local economies. R&D investment contributes to the regional local economy by increasing employment and production activity of the investees. The investees may end up with increased productivity, sales and employment. At the regional R&D level, the central government R&D fund and firm self R&D budget will be the source of R&D investment. Further positive effects are inter-related with local industries. This study carried out an empirical analysis on the effect of R&D investment on local economies using Korean panel data after comparing international literatures. The dynamic panel estimator is used to estimate an autoregressive model with lagged dependent variable. Using the Da Silva method, mixed variance-component moving-average error process is estimated and selected. R&D investment is very important factor to improve the productivity of a region and the size of the effect is dependent on the time periods within the Korean economic history.

• Journal of Korean Academy of Nursing
• /
• v.22 no.4
• /
• pp.526-551
• /
• 1992

The purpose of this study was to identify the commonalities of various nursing interventions and effective intervention methods in each intervention through analysis and synthesis of many accumulated research papers. The study analyzed the effects of various nursing interventions on anxiety and /or stress. For this purpose, 64 experimental studies with randomized or nonequivalent control group pre-test-posttest design were selected from journals of medical and nursing schools, the Korean Nurse, the Korean Nurses' Academic Society Journal, the Cetnral Journal of Medicine, the New Medical Journal, the Nurse Monthly, and from theses and dissertations conducted from 1970 to 1991. The selected studies nor classified according to three characteristics : 1) the research samuel, 2) types and methods of nursing interventions, and 3) statistical tests. The following analysis was done : 1) Confirmation of the accuracy of data drawn from each study by paired review, 2) Estimation of the homogenity of pre-test scores of the dependent variable between control and experimental groups warranted the effect size of post-scores, 3) If the homogenity of pre-test scores did not warrant, the change scores from pre-test to post-test were used to estimate the effect size, 4) Use of the effect size of each study among homogenious studies was tested for each intervention method, such as relaxation, information, and touch and /or support. Finally, for the studies not showing homogenity, an ANOVA test was used to identify patterns for each intervention. Some findings are summarized as follow : The effect sizes for relaxation and information were greater than those for touch and /or supportive technique. Studies using random assignment had greater effect sizes than nonrandomized sample studies using the same intervention. For healthy people, group education was more effective than individual teaching. However, for patients, relaxation and touch and /or supportive techniques given on individual basis were more effective than when given in a group situation. Measuring anxiety and stress by biological indicators was less effective than by self-report. Budzynski's relaxation method was the most effective. The more frequently the techniques applied, the larger the effect size. On the bases of these findings, the following recommendations were made : 1. A combination of information, relaxtion, and touch-supportive techniques should be used for greater effect in reducing the level of anxiety and /or stress. 2. Information is the first choice of intervention to reduce the level of anxiety and /or stress of healthy People : other interventions may be added depending on the conditions of the subjects.

• ETRI Journal
• /
• v.15 no.2
• /
• pp.11-25
• /
• 1993

Interface trap densities at gate oxide/silicon substrate ($SiO_2/Si$) interfaces of metal oxide semiconductor field-effect transistors (MOSFETs) were determined from the substrate bias dependence of the subthreshold slope measurement. This method enables the characterization of interface traps residing in the energy level between the midgap and that corresponding to the strong inversion of small size MOSFET. In consequence of the high accuracy of this method, the energy dependence of the interface trap density can be accurately determined. The application of this technique to a MOSFET showed good agreement with the result obtained through the high-frequency/quasi-static capacitance-voltage (C-V) technique for a MOS capacitor. Furthermore, the effective substrate dopant concentration obtained through this technique also showed good agreement with the result obtained through the body effect measurement.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.1
• /
• pp.85-95
• /
• 1996

Although the specific resistance to filtration is the most frequently employed means for characterizing dewaterability of a sludge, it presently is not possible to design nor to prediet performance of dewatering facilities using traditional linearized parabolic filtration equation, that is, the specific resistance model because of theoretical and practical inadequacies of the concept. Limitations of the specific resistance model reflect the need to examine fundamental sludge properties and filtration behaviors affecting dewaterability. From this study, two major limitations of the specific resistance model were noted. First, specific resistance values are very dependent on the sludge concentration because of the variations of particle size distribution and cake clogging to occur when surface area mean diameter is less than $25{\mu}m$ for activated sludge, $18{\mu}m$ for water treatment plant sludge. Second, nonparabolic filtration behavior can result from cake clogging, caused by the migration of fine particles into the cake pores, accelated by skin effect with highly compressible sludges.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.04a
• /
• pp.65-68
• /
• 1991

Finite element analysis is used to study the role of interfacial properties on the bond strength of reinforcing steel to concrete. Specifically, the role played by epoxy coatings on the failure of standard beam-end specimens is explored. Experimental results show that epoxy coatings reduce bond strength, but that the effect is dependent on the bar size and the deformation pattern. The finite element model for the beam-end specimen includes representations for the deformed steel bar, the concrete, and the interfacial material. The interface elements can be varied to match the stiffness and friction properties of the interfacial material. Cracking within the concrete is represented using Hillerborg's ficticious crack model. The model is used to study important aspects or behavior observed in the tests and to provide an explanation for the effect of the various test parameters.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.59-62
• /
• 2006

Mg alloys have drawn a huge attention in the field of transportation and consumer electronics industries since it is the lightest alloy which could be industrially applicable. Most Mg alloy components have been fabricated by casting method. However, there have been a lot of research activities on the wrought alloys and their plastic forming process recently. The deformation behavior of an AZ31 Mg alloy at the elevated temperature was examined firstly to find out the optimum plastic forming range in terms of temperature and strain rate. During high temperature deformation, AZ31 alloy is usually undergone the dynamic recrystallization which influence the deformation behavior in turn. In the present study, the effect of deformation on dynamic recrystallization of an AZ31 alloy was investigated to clarify the relation between the deformation and recrystallization. In an AZ31 alloy system, the dynamic recrystallization was found to occur continuously. Recrystallized grain size was dependent on the stress level.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1636-1643
• /
• 2003

In this study, bolted joint made of Glass-Mat Reinforced Thermoplastics (GMT) specimen was under tensile loading to investigate the relation between joint strength and glass-fiber weight fraction of the flat plate specimen. The effect of molding conditions such as the initial size of a GMT charge and molding temperatures was investigated under plane strain condition. In consideration of the specimen geometry, minimum end distance and width of the specimen to induce the bearing fracture mode of the bolted joint were determined. And finally, the effect of the outer diameter of washer and clamping pressure on joint strength was also investigated. Since joint strength is dependent on the local glass-fiber weight fraction, experimentally measured strength was modified, considering its irregular values of the specimen molded under various processing conditions in order to obtain a reasonable correlation between the two.

• International Journal of Ocean System Engineering
• /
• v.1 no.3
• /
• pp.144-147
• /
• 2011

The rotor that initially converts the flow energy into rotational energy is a very important component that affects the efficiency of the entire tidal current power system. Rotor performance is determined by various design variables. Power generation is strongly dependent on the incoming flow velocity and the size of the rotor. To extract a large quantity of power, a tidal current farm is necessary with a multi-arrangement of devices in the ocean. However, the interactions between devices also contribute significantly to the total power capacity. Therefore, rotor performance, considering the interaction problems, needs to be investigated to maximize the power generation in a limited available area. The downstream rotor efficiency is affected by the wake produced from the upstream rotor. This paper introduces the performance of a downstream rotor affected by wakes from an upstream rotor, demonstrating the interference affecting various gabs between devices.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.33-38
• /
• 2008

A ground-loop heat exchanger in a ground source heat pump system is an important unit that determines the thermal performance of a system and its initial cost. The Size and performance of this heat exchanger is highly dependent on ground thermal properties. A proper design requires certain site-specific parameters, most importantly the ground effective thermal conductivity, the borehole thermal resistance and the undisturbed ground temperature. This study was performed to investigate the effect of some parameters such as borehole lengths, various grouting materials and U-tube configurations on ground effective thermal conductivity. In this study, thermal response tests were conducted using a testing device with 9-different ground-loop heat exchangers. From the experimental results, the length of ground-loop heat exchanger affects to the effective thermal conductivity. Among the various grouting materials, the bentonite-based grout with silica sand shows the largest thermal conductivity value.