• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2006년도 추계학술발표대회
• /
• pp.523-526
• /
• 2006

소프트웨어 프로세스 개선에 대한 원리와 방법은 CMM/CMMI 와 같은 프로세스 모델의 등장으로 인식하였으나 개인과 팀 차원에서 이를 구체적으로 구현하기 위한 운영적 차원의 절차와 수단의 부족으로 실제현상에 적용하여 성과를 창출하기에는 어려움을 겪어왔다. 이러한 문제를 해결하고 개발자와 개발팀의 차원에서 CMM/CMMI 의 목표와 프랙티스를 구현하기 위해 SEI(Software Engineering Institute)에 의해 PSP/TSP 가 개발되었다. 그러나 RSP 가 팀 차원에서 스프트웨어 개발에 사용할 수 있는 구체적인 기법들을 기술하고 있더라고 RSP 에서 수집되는 메트릭에 대한 분석기법은 여전히 부족하다. 따라서 TSP 수행시 발생할 수 있는 문제를 방지하고 프로세스가 변경되고 유지 관리될 수 있도록 하기 위해서는 식스시그마의 다양한 통계 기법과 의사 결정도구의 사용이 필요하다. 본 논문에서는 TSP 의 각 스크립트에 식스시그마의 통계 기법과 의사 결정도구를 포함 시킴으로써 TSP를 확장한 식스시그마-TSP 통합 프레임워크와 활용 가이드라인을 제시함으로써 팀 차원에서의 프로세스 개선의 수행을 지원하며 팀 차원에서 발생할 수 있는 이슈를 식스시그마의 분석, 정량화 도구를 사용하여 해결하고 아울러 팀 성과를 향상할 수 있는 방법을 모색해본다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.254-257
• /
• 1993

This paper presents a new method to implement Hebbian learning method on artificial neural network. In hebbian learning algorithm, complexity in terms of multiplications is high. To save the chip area, we consider a new learning circuit. By calculating similarity, or correlation between $X_i$ and $O_i$, large portion of circuits commonly used in conventional neural networks is not necessary for this new hebbian learning circuit named COR. The output signals of COR is applied to weight storage capacitors for direct control the voltages of the capacitors. The weighted sum, ${\Sigma}W_{ij}O_j$, is realized by multipliers, whose output currents are summed up in one line which goes to learning circuit or output circuit. The drain current of the multiplier can produce positive or negative synaptic weights. The pass transistor selects eight learning mode or recall mode. The layout of an learnable six-neuron fully connected Hopfield neural network is designed, and is simulated using PSPICE. The network memorizes, and retrieves the patterns correctly under the existence of minor noises.

• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.674-681
• /
• 2011

In the early phase of vehicle development, CAE is conducted as tool for vehicle performance assessment. To maintain acceptable road noise performance, solution for reduced vehicle sensitivity is required. Chassis interface dynamic stiffness characteristics are key component to isolating vibration and noise of road from the vehicle interior. This research provide how to set up the optimized dynamic characteristics under noise effect through DFSS study. CAE-based DOE is performed to build prediction math model, CMS process involves DOE to achieve very fast run times while giving results very comparable. Minimized 95th percentile of performance distribution is applied to minimize vehicle sensitivity and road noise levels variation during the optimization process. Finally, the results of optimization were reviewed for performance and robustness.

• Bulletin of the Korean Chemical Society
• /
• 제11권1호
• /
• pp.49-54
• /
• 1990

The gas-phase thermolysis reactions of ${\alpha}$- and ${\beta}$-methylated ethyl formates, Y = $CH-X-CHR_1CH_2R_2$ where X = Y = O or S and $R_1\;=\;R_2$ = H or $CH_3$, are investigated theoretically using the AM1 method. The experimental reactivity order is reproduced correctly by AM1 in all cases. The thermolysis proceeds through a six-membered cyclic transition state conforming to a retro-ene reaction, which can be conveniently interpreted using the frontier orbital theory of three-species interactions. The methyl group substituted at $C_{\alpha}\;or\;C_{\beta}$ is shown to elevate the ${\pi}$-HOMO of the donor fragment (Y = C) and depress the ${\sigma}^{\ast}$-LUMO of the acceptor fragment ($C_{\beta}$-H), increasing the nucleophilicity of Y toward ${\beta}$-hydrogen which in turn increases the reactivity. The two bond breaking processes of the $C_{\alpha}$-X and $C_{\beta}$-H bonds are concerted but not synchronous so that the reaction takes place in two stages as Taylor suggested. The initial cleavage of $C_{\alpha}$-X is of little importance but the subsequent scission of $C_{\beta}$-H occurs in a rate determining stage.

• Ocean Systems Engineering
• /
• 제9권3호
• /
• pp.329-347
• /
• 2019

The shipbuilding industry is characterized by order production, and various processes are performed simultaneously in the construction of ships. Therefore, effective management of the production process and productivity improvement form important key factors in the industry. For decades, researchers and process managers have attempted to improve processes by using business process analysis (BPA). However, conventional BPA is time-consuming, expensive, and mainly based on subjective results generated by employees, which may not always correspond to the actual conditions. This paper proposes a method to improve the production process of offshore plant modules by analysing the process mining data obtained from the shipbuilding industry. Process mining uses information accumulated from the system-provided event logs to generate a process model and determine the values hidden within the process. The discovered process is visualized as a process model. Subsequently, alternatives are proposed by brainstorming problems (such as bottlenecks or idle time) in the process. The results of this study can aid in productivity improvement (idle time or bottleneck reduction in the production process) in conjunction with a six-sigma technique or ERP system. In future, it is necessary to study the standardization of the module production processes and development of the process monitoring system.

• Bulletin of the Korean Chemical Society
• /
• 제12권2호
• /
• pp.178-181
• /
• 1991

The crystal structure of dehydrated fully $Cd^{2+}$-exchanged zeolite A evacuated at $2{\times}10^{-6}$ Torr and $450^{\circ}C (a = 12.225(2){\AA})$ and of its ethylene sorption complex (a = 12.219(2) ${\AA}$) have been determined by single crystal X-ray diffraction techniques in the cubic space group Pm3m at $21(1)^{\circ}$. The structures were refined to final error indices, $R_1$ = 0.063 and $R_2$ = 0.065 with 266 reflections and $R_1$ = 0.055 and $R_2$ = 0.062 with 260 reflections, respectively, for which $I{\gg}3{\sigma}(I)$. In both structures, six $Cd^{2+}$ ions lie at two distinguished three-fold axes of unit cell. Dehydrated $Cd_6$-A sorbs 4 ethylene molecules per unit cell at $25^{\circ}C$ (vapor pressure of ethylene is ca. 100 Torr). Each $Cd^{2+}$ ion forms a lateral ${pi}$ complex with an ethylene molecule. Four $Cd^{2+}$ ions exist in a nearly tetrahedral environment, 2.210(7)${\AA}$ apart from three framework oxygen ions (considering ethylene molecule as a monodentate ligand) and $2.67(6){\AA}$ from each carbon atom of ethylene molecule.

• 열처리공학회지
• /
• 제37권2호
• /
• pp.58-65
• /
• 2024

In the present study, the effect of annealing condition on the microstructures and mechanical properties of the cold-rolled CoCrFeMnNi high entropy alloys were studied. Annealing treatment was performed under six different temperatures. Microstructural analyses confirmed that annealing below 800℃ resulted in the formation of intermetallic sigma (σ) phase within face-centered cubic (FCC) matrix, and this σ phase has beneficial effects on the formation of fine-grained structures through retardation of grain growth and recrystallization due to Zener pinning effect. This led to the enhanced yield strength and tensile strength of ~646 and ~855 MPa, respectively. The microstructures annealed above 800℃ demonstrated single FCC phase, and fully-recrystallized single FCC microstructure resulted in a slight increase in ductility with a considerable decrease in strength. The evolution of mechanical properties, such as strength, ductility, and strain hardening exponent, will be discussed.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1121-1126
• /
• 2002

Two anhydrous crystal structures of fully dehydrated Cd2+ - and Cs+ -exchanged zeolite X, Cd32Cs28Si100Al92O384 (Cd32Cs28-X: a = 24.828(11) $\AA)$ and fully dehydrated Cd,sup>2+ - and Rb+ -exchanged zeolite X, Cd28Rb36Si100Al92O384 (Cd28Rb36-X: a = 24.794(2) $\AA$), have been determined by single-crystal X-ray diffraction techniques in the cubic space group Fd3 at $21(1)^{\circ}C.$ The structures were refined to the final error indices, R1 = 0.058 and R2 = 0.065 with 637 reflections for Cd32Cs28-X and R1 = 0.086 and R2 = 0.113 with 521 reflections for Cd28Rb36-X for which I > $3\sigma(I)$. In the structure of Cd,sub>32Cs28-X, 16 Cd2+ ions fill the octahedral sites I at the centers of the double six rings (Cd-O = $2.358(8)\AA$ and O-Cd-O = $90.8(3)^{\circ}$ ). The remaining 16 Cd2+ ions occupy site II (Cd-O = $2.194(8)\AA$ and O-Cd-O = $119.7(4)^{\circ})$ and six Cs+ ions occupy site II opposite to the single six-rings in the supercage; each is $2.322\AA$ from the plane of three oxygens (Cs-O = 3.193(13) and O-Cs-O = $73.0(2)^{\circ}).$ Aboutten Cs+ ions are found at site II', $1.974\AA$ into the sodalite cavity from their three oxygen plane (Cs-O = $2.947(8)\AA$ and O-Cs-O = $80.2(3)^{\circ}).$ The remaining 12 Cs+ ions are distributed over site III' (Cs-O = 3.143(9) and O-Cs-O= $59.1(2)^{\circ})$. In the structure of Cd28Rb36-X, 16 Cd2+ ions fill the octahedral sites I at the center of the double-sixrings (Cd-O = 2.349(15) and O-Cd-O = $91.3(5)^{\circ}$ ). Another 12 Cd2+ ions occupy two different II sites (Cd-O = $2.171(18)/2.269(17)\AA$ and O-Cd-O = $119.7(7)/113.2(7)^{\circ}).$ Fifteen Rb+ ions occupy site II (Rb-O = $2.707(17)\AA$ and O-Rb-O = $87.8(5)^{\circ}).$ The remaining 21 Rb+ ions are distributed over site III' (Rb-O = $3.001(16)\AA$ and O-Rb-O = $60.7(4)^{\circ})$. It appears that the smaller and more highly charged Cd2+ ions prefer sites I and Ⅱ in that order, and the larger Rb+ and Cs+ ions, which are less able to balance the anionic charge of the zeolite framework, occupy sites II and II' with the remainder going to the least suitable site in the structure, site III'.The maximum Cs+ and Rb+ ion exchanges were 30% and 39%, respectively. Because these cations are too largeto enter the small cavities and their charge distributions may be unfavorable, cation-sieve effects might appear.

• Bulletin of the Korean Chemical Society
• /
• 제15권3호
• /
• pp.236-241
• /
• 1994

The crystal structures of $Cd_6-A$ evacuated at $2{\times}10^{-6}$ Torr and 750$^{\circ}$C (a=12.216(l) ${\AA}$), and of the product of its reaction with Rb vapor (a= 12.187(l) ${\AA}$), have been determined by single-crystal x-ray diffraction techniques in the cubic space group Pm$\bar{3}$m at 21(l)$^{\circ}$C. Their structures were refined to the final error indices, $R_1$=0.055 and $R_2$=0.067 with 191 reflections, and $R_1$=0.066 and $R_2$=0.049 with 90 reflections, respectively, for which I>3${\sigma}$(I). In dehydrated $Cd_6-A$, six $Cd^{2+}$ ions are found at two different threefold-axis sites near six-oxygen ring centers. Four $Cd^{2+}$ ions are recessed 0.50 ${\AA}$ into the sodalite cavity from the (111) plane at O(3), and the other two extend 0.28 ${\AA}$ into the large cavity from this plane. Treatment at 250 $^{\circ}$C with 0.1 Torr of Rb vapor reduces all $Cd^{2+}$ ions to give $Rb_{13.5^-}$A. Rb species are found at three crystallographic sites: three $Rb^+$ ions lie at eight-oxygen-ring centers, filling that position, and ca. 10.5 $Rb^+$ ions lie on threefold axes, 8.0 in the large cavity and 2.5 in the sodalite cavity. In this structure, ca. 1.5 Rb species more than the 12 $Rb^+$ ions needed to balance the anionic charge of zeolite framework are found, indicating that sorption of $Rb^0$ has occurred. The occupancies observed can be most simply explained by two "unit cell" compositions, $Rb_{12^-}A{\cdot}Rb$ and $Rb_{12^-}A{\cdot}2Rb$, of approximately equal population. In sodalite cavities, $Rb_{12^-}A{\cdot}Rb$ would have a $(Rb_2)^+$ cluster and $Rb_{12^-}A{\cdot}2Rb$ would have a triangular $(Rb_3)^+$ cluster. Each of the atoms of these clusters must bind further through a six-oxygen ring to a large cavity $Rb^+$ to give $(Rb_4)^{3+}$ (linear) and $(Rb_6)^{4+}$ (trigonal). Other unit-cell compositions and other cationic cluster compositions such as $(Rb_8)^{n+}$ may exist.

• 대한화학회지
• /
• 제39권1호
• /
• pp.7-13
• /
• 1995

$Ca^{2+}$ 이온으로 완전히 치환된 제올라이트 $X(Ca_{46}Al_{92}Si_{100}O_{384})$와 $Ca^{2+}$ 이온과 $K^+$ 이온으로 치환된 제올라이트 $X(Ca_{46}Al_{92}Si_{100}O_{384})$를 $360^{\circ}C에서2{\times}10^{-6}$ Torr의 진공하에서 탈수한 구조를 $21^{\circ}C에서$ 입방공간군 Fd3을 사용하여 단결정 X-선 회절법으로 해석하고 구조를 정밀화하였다. 탈수한 $Ca_{46}-X$의 구조는 Full-matrix 최소자승법 정밀화 계산에서 $I>3\sigma(I)인$ 166개의 독립반사를 사용하여 최종오차인자를 R_1=0.096,\;R_2=0.068$까지 정밀화 계산하였고, $Ca_{32}K_{28}-X$의 구조는 130개의 독립반사를 사용하여 R_1=0.078,\;R_2=0.056$까지 정밀화시켰다. 탈수된 $Ca_{46}-X$에서 $Ca^{2+}$ 이온은 점유율이 높은 서로 다른 두개의 자리에 위치하고 있었다. 16개의 $Ca^{2+}$ 이온은 이중 6-산소고리(D6R)의 중심에 위치하였고(자리 I; $(Ca(1)-O(3)=2.51(2)\AA)$, 30개의 $Ca^{2+}$ 이온은 큰 동공쪽으로 약 0.44 $\AA$ 들어간 자리에 위치하고 있다(Ca(2)-O_(2)=2.24(2) $\AA$, $O(2)-Ca(2)-O(2)=119(1)^{\circ}).$ 탈수한 $Ca_{32}K_{28}-X$의 구조에서 모든 $Ca^{2+}$ 이온과 $K^+$ 이온은 4개의 서로 다른 결정학적 자리에 위치하고 있었다 : 16개의 $Ca^{2+}$ 이온은 D6R의 중심에 위치하였고, 다른 16개의 $Ca^{2+}$ 이온과 16개의 $K^+$ 이온은 큰 동공에 있는 자리 II에 각각 위치하고 있었다. 이러한 $Ca^{2+}$ 이온과 $K^+$ 이온은 O(2)의 평면에서 큰 동공쪽으로 약 0.56 $\AA$과 1.54 $\AA$ 들어간 자리에 각각 위치하고 있었다. $(Ca(2)-O(2)=2.29(2)\AA$, $O(2)-Ca(2)-O(2)=119(1)^{\circ}$, $K(1)-O(2)=2.59(2)\AA$, and $O(2)-K(1)-O(2)=99.2(8)^{\circ}).$ 12개의 $K^+$ 이온은 큰 동공에 있는 자리 III에 위치하고 있었다. $(K(2)-O(4)=3.11(6)\AA$ and $O(1)-K(2)-O(1)=128(2)^{\circ}).$