• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.27-49
• /
• 1987

Using ³H-proline as a radioactive tracer, the relationship between the ultrastructural differentiation and the site of protein synthesis has been investigated in developing red blood corpuscles. The general ultra-structure of erythropoietic cells in differentiation after 60 minutes of in vitro labeling has confirmed the results from previous investigations by Bessis, M., Thiery, J. and others. In dividing nuclei more than two-thirds of the labeling were present at the interface between heterochromatin and euchromatin. In less differentiated cells most of the grains in interphase cells was localized over the nucleus. As the cells continued to develope beyond a stage where cytoplasmic density was clearly increased over other cell lines in bone marrow, the majority of grains localized over the cytoplasmic area was decreased in more mature cells, as judged by the density of cytoplasm, and the structural changes in mitochondria, Golgi complex and polysomal configurations. These results show; 1) that the cytoplasm of erythroblast series does not change under in vitro conditions employed in the study; 2) that protein synthesis in the nucleus occurs largely at the interface between euchromatin and heterochromatin in active nuclei; and 3) that cytoplasmic synthesis of proteins continues to take place well into the normoblast stage solong as the physically visible polysomes are present in maturing red blood corpuscles.

• Journal of Korean Society of societal Security
• /
• v.1 no.2
• /
• pp.67-72
• /
• 2008

To confirm the stability of a cut slope in the road extension construction site, several investigations were carried out and countermeasures of slope was studied. This paper describes a study of design case of extra reinforcement on existing cut slope reinforced by preloading and piles in roads. To investigate the effect of stabilizing piles installed in a cut slope, an instrumentation system also designed, was. As a result that the stabilizing file and earth anchor are considered as the extra reinforcement, both stabilizing pile and earth anchor guarantee the stability of cut slope. However, stabilizing pile is selected in aspects of economy and continuity to the existing cut slop reinforcement including counterweight fill and stabilizing piles.

• Parasites, Hosts and Diseases
• /
• v.51 no.4
• /
• pp.489-492
• /
• 2013

A paleoparasitological survey to detect helminth eggs was performed in archaeological sites of Jeolla-do and Jeju-do, the Republic of Korea. Total 593 soil samples were collected in 12 sites of Jeolla-do and 5 sites of Jeju-do from April to November 2011, and examined by the methods of Pike and coworkers. A total of 4 helminth eggs, 2 eggs each for Trichuris trichiura and Ascaris sp., were found in soil samples from 1 site, in Hyangyang-ri, Jangheung-eup, Jangheung-gun, Jeollanam-do. The egg-recovery layer was presumed to represent a 19th century farm, which fact suggested the use of human manures. This is the third archaeological discovery of parasite eggs in Jeolla-do. Additionally, no helminth eggs in archaeological sites of Jeju-do is an interesting problem to be solved in the further investigations.

• Journal of information and communication convergence engineering
• /
• v.9 no.3
• /
• pp.325-330
• /
• 2011

Due to the wide growth and popularity of social network website, large numbers of users discover these social network sites are a place where they can be able to spend their leisure time sharing interests, sharing ideas freely, sharing personal experience, and also to search for new friends or partners. These websites give an opportunity for its users to socialize with new people and to keep in touch or reconnect with current or old friends and families across disperse continents, which traditionally replace the common traditional methods. These social network websites need accurate and careful investigations and findings on the usability issues for effective interactivity and more usability. However, little research might have previously invested on the usability of these social network websites. Therefore, we propose a new framework to study and test the usability of these social network sites. We namely call our framework "Interactivity". This framework will enable developers to assess the usability of the social network sites. It will provide an overview of the user's behavior while interacting in these social network websites. Performance of the framework will be performed using Camtasia software. This software will entirely capture the interactivity of users including the screen and the movements, which the screen and the motion of the user action will undergo to analysis at the end of our research.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.1
• /
• pp.16-26
• /
• 2010

In this paper, we present the result of investigations pertaining to the development of the floating type photovoltaic energy generation system. Pultruded FRP has superior mechanical and physical properties compared with those of conventional structural materials. Since the FRP has an excellent corrosion-resistance and high specific strength and stiffness, the FRP material may be highly appreciated for the development of the floating type photovoltaic energy generation system. In the paper, we discussed the development concepts of the floating type photovoltaic energy generation system, briefly. The mechanical properties of the FRP structural member used in the development are investigated through the tensile and compression tests. Test results are used in the finite element analysis and the design of the system. In addition, bolted connections of the members are briefly discussed and the strengths of FRP bolted connections are estimated based on the results of experiments. The experimental results are compared with the finite element analysis results and discussed briefly. The floating type photovoltaic energy generation system is designed, fabricated, and installed successfully in site.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.321-329
• /
• 2009

I/I(Infiltration/Inflow) characteristics should be studied to achieve I/I reduction which is a main object of sewer rehabilitation. However, The scientific and practical studies which are based on actual survey within the country are not thorough going enough. The earlier studies were limited because of a short research period and specific region. Thus, In this study, a formula is deduced by intensive correlation analysis between defective number and I/I volume in sewer pipe. It can be used as preliminary data when the project established for cost-effective pipe rehabilitation. The study shows that the researched region have a faulty point at every 9.3m on average and prove correlation between defective number and I/I volume in sewer pipes. Thus, this study can improve the investigation system and estimate the volume of the pipe rehabilitation, when site investigations for rehabilitation have been conducted.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.445-454
• /
• 2006

Myungji Housing Complex is located in the Nakdong River plain in which the Busan soft clays are developed. It has thick soft soil laver of about GL(-)50m including loose sandy layers, upper and lower clayey layers. The clayey layers have been being consolidated since the land reclamation was completed to build the place for Housing Complex(Apartment) in 1997. Therefore, as one of a series of advance preparations of this project, study was carried on the geotechnical characteristics under the foundation The first part of this paper represents a brief geological history. Then, geotechnical characteristics of clay was analyzed in the classical developments in soft clay. They were based on the geotechnical data obtained by site investigations performed from 1992 to 2005. Finally, we evaluated the average degree of consolidation at this point in time and the residual settlements of upper clayey layer using dissipation and oedometer tests for this project

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.97-101
• /
• 2001

Recently, an excavated soil-recycling machine has been receiving considerable attentions. The mobile type excavated soil-recycling machine is able to improve the soils by adding the additives such as slaked lime and cement at the construction site. However, not only the mechanical factors such as paddle inclination angle and pitch of the paddle but also the physical properties of the excavated soils affect the mixing performance of the excavated soils and additives. In this sense, experimental investigations are uneconomical and ineffective. This paper concerns with the numerical simulator to analyze the mixing behavior of excavated soils and additives in the soil-recycling machine with dual shafts in order to assist the economical and effective design of the optimum soil-recycling machine. By using the simulator, several simulations were carried out, and the effects of some mechanical parameters such as the paddle inclination angle and pitch of the paddle on the mixing performance were made clear.

• Journal of Environmental Health Sciences
• /
• v.31 no.6
• /
• pp.467-474
• /
• 2005

The runoff characteristics of combined sewer overflow(CSO) in the urban area of Jeonju were investigated and analyzed by using the SWMM (Storm Water Management Model) and GIS. From August to November 2004, investigations on two rainfall events were performed and flowrate, pH, BOD, COD, SS, T-N and T-P were measured. these data were used for model calibration. Using GIS technique, watershed characteristics of study area were calculated. that is, divide into sub_basin, total width, slope, make soil map etc. On the basis of the measured data and the simulation results by SWMM, it could be known that the $80-90\%$ of pollution load are discharged in early-stage storm runoff. SMC(site mean Concentration) for combined sewer system area were BOD 28.1, COD 31.5, SS 186 ppm etc. this is shown that during the rain fall, high concentration of waste was loaded to receiving water. Unit loads of combined sewer system area were BOD 306, COD 410, SS 789, T-N 79, T-P 6.8 kg/ha/yr.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.304-307
• /
• 2015

Carbon nanotubes (CNTs) have been widely accepted and used as the enhancer for polymer nano-composites due to their remarkable mechanical properties. Understandably, the CNT fiber-polymer matrix interface plays a major role in determining the properties of the CNT-polymer nano-composites. Here, using the LCAODFT Lab tool available on the EDISON Nano-Physics site, we performed first-principles density-functional theory calculations to determine the atomic configurations and binding energies of the CNTs in contact with polymers. For the polymer matrixes, we chose poly(acrylonitrile) (PAN), which is one of the most well-known polymer matrixes for the carbon nanofiber nanocomposites. Different chiralities and diameters of pristine CNTs were considered, and several PAN-CNT configurations were prepared based on the atomistic positions and directions of cyano group in PAN. The most favorable configuration of PAN was obtained when the PAN bound parallel to the surface of CNT. Our finding indicates the binding configurations are determined by the direction of the cyano group dominantly rather than the atomistic position of PAN, or the symmetry of CNTs. The result of increasing the length of CNT diameter suggests that PAN is inclinable to align evenly on the surface of relatively large size of CNT with the configuration parallel to the surface. These results obtained in this study will provide the starting point for the design of improved PAN-CNT composites for the next-generation ultra-strong and ultra-light carbon nanofibers.