• 자원환경지질
• /
• 제10권2호
• /
• pp.93-96
• /
• 1977

• 한국생산제조학회지
• /
• 제7권1호
• /
• pp.34-40
• /
• 1998

Conductive metal matrix composite(MMC) material of 30% silicon carbide particulated based on aluminum matrix was machined by die sinking electrical discharge machining(EDM) process according to different current and duty factor for reverse polarity of electrode. Material removal rate(MRR) was examined by process under various operation conditions. The surface morphology was evaluated by surface roughness parameter and scanning electron microscopy(SEM) research. The MRR was suddenly increased over 11 ampere of current, and it was slightly changed over 0.3 of duty factor. The maximum surface roughness of EDMed surface was affected by the duty factor. The SEM photograghs of EDMed surface showed wide recast distribution region of melting materials as increased of current and duty factor.

• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.59-66
• /
• 2015

In this study, structural stability of large diameter high density polyethylene (HDPE) pipe during installation was numerically investigated in order to investigate the effect of concrete collar dimension, water depth and tension (pulling force). From the numerical simulation results, the total stress of HDPE pipe with designed concrete collar was within 2.5%, so the total weight of concrete collar for sinking of HDPE is important rather than concrete collar dimension. Furthermore, the tension area for possible installation is decreased as the air filling rate is increased. Therefore, it is important to calculate the reasonable tension range before actual installation for safe installation of HDPE pipe.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.119-124
• /
• 2010

This paper addresses the design and fabrication of desktop die-sinking dry electrical discharge machining (EDM) system and its experimental performance analysis. The developed desktop dry EDM machine has the horizontal configuration with the size of $300{\times}200{\times}260mm$. The experimental performance analysis is conducted to investigate the effects of EDM conditions and dielectric gas temperature on the surface roughness of EDMed slots and number of EDM sparks. The experimental results demonstrate that low feed rate and large electrode displacement are good for better surface roughness and more number of EDM sparks. In addition, low temperature of dielectric gas results in better surface roughness.

• 동의생리병리학회지
• /
• 제24권5호
• /
• pp.784-789
• /
• 2010

Syndrome of asthenia of spleen gi usually caused by improper diet, overstrain, emotional upsets, followed by syndrome of sinking of splenic gi. There are several pathologic categories of splenic gi deficiency syndrome. These include failure to nourish the body, failure to astringe liquid substances, failure of splenic gi to rise, gi stagnation in which gi can't disperse normally, failure of transportation. In the splenic gi deficient situation, body fluid is usually stagnated because the rest of the water absorbed from the food is transported to every part of the body by the action of splenic gi. In addition, there is abnormal sinking of clear gi, followed by fever due to gi deficiency. Bojungikgi-tang is composed of restoratives which are invigorating splenic gi and herbs which uplift splenic gi. It is mainly applicable to splenic gi deficiency syndrome accompanied by gi stagnation and fluid accumulation.

• 지구물리와물리탐사
• /
• 제2권1호
• /
• pp.54-62
• /
• 1999

본 논문은 파동장의 심도방향으로의 외삽(extrapolation)을 사용한 중합전 데이터밍 기법을 소개한다. 데이터밍 알고리즘의 유도를 위해, 우선 평면에 정의되어 있는 파동장을 임의의 굴곡을 갖는 면으로 외삽을 수행하는 모델링 연산자를 대수학적으로 구한 후, 이러한 모델링 연산자와 어드조인트(adjoint)관계에 있는 연산자를 대수학적으로 구하여 데이터밍 연산자를 얻게된다. 본 논문에서 사용된 취합전 모델링 연산자는 이미 널리 쓰이고 있는 중합전 마이그레이션(prestack migration) 중의 하나인 survey sinking 방법의 모델링에 해당하는 double square root(DSR)식이 사용되었다.

• 한국항해학회지
• /
• 제18권1호
• /
• pp.23-30
• /
• 1994

By use of the Climatological Report(1982~1991) and the Marine Casualty Report(1982`1992), marine casualties caused by meteorological factors and climatic characteristics along Korean coast were analysed. Marine casualty by meteorological factors can be classified into three kinds such as collision, aground and sinking. On the whole collision was mainly caused by dense fog and heavy precipitation, and aground and sinking was caused by strong wind and high sea. As results of analysis of the distribution of wind, fog and precipitation at major ports in Korea, climatic characteristics along Korean coast are as follows. in the eastern coast, wind was relatively weak and fog was not so frequently formed, while strong wind blew all the year round and fog appeared from April to August in Ulleung Island. In the southern coast, the wind was strong in both winter and summer, fog formed frequently in late spring through mid-summer and heavy precipitation was in summer. Typhoon affecting Korea was usually passing this area to the East Sea. In the western coast, strong wind was prevailing in winter at southern region and fog was formed very frequently throughout the year.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.827-831
• /
• 1997

Conductive veramic matrix composite(CMC) workpiece of TiC 33%/Al /sab 2/O /sab 3/ 66% Y /sab 2/ O /sab 3/ was machined by die sinking electrical discharge machining(EDM) according to different pulse duration and suty factor for reverse polarity of electrode. Material removal rate(MRR) was examined by process under various operating conditions. The surface morphology was evaluated by surface roughness values and scanning electron microscopy(SEM) research. The more MRR was obtained according to increase pulse duration and duty factor. Also the maximum surface roughness(Rmax) of EDMed surface was slightly changed with increased pulse duration and duty factor. The SEM photographs of EDMed surface showed wide recast wide recast distribution region of melting materials in purse duration 0.130(ms) than 0.048(ms).

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 추계학술대회논문집
• /
• pp.76-85
• /
• 1995

The general equation of homogeneous strin for tube drawing has been derived. This can be applied to the general tube drawing method for non-zero plug angle. Also, the derived equation can represent Blazynski's equations for the sinking and tube drawing with a constant plug diameter. The general tube drawing was divided into two steps, sinking and contact drawing zones. The derived equation can calculate the homogeneous strains of the two steps. The various tube drawing methods such as fixed tapered plug, fixed mandrel, fixed back tapered plug, and floating plug have been analysed by the equation and finite element analysis. From the FEM calculations, the total strains and drawing stresses are obtained and consequently the redundancy factor of various drawing methods was analysed. The fixed back tapered plug method showed the largest redundancy factor and the floating plug method had the largest drawing stress.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.473-477
• /
• 2000

The experimental study of die-sinking electrical discharge machining(EDM) was conducted for Cold Die Alloy Steel of SKD-11 with rotary electrode according to the peak current of 11A, 15A and 19A, and the duty factor of 0.24, 0.45. dielectric fluid flow through the electrode inside according to the change of electrode internal diameter during the EDM working. Material removal rate(MRR) was increased with flushing & rotation of electrode at the condition for the peak current of 15A, 19a but the MRR is decreased at the flushing only. The more surface roughness was obtained for the case of the flushing & rotation under the peak current of 19A.