• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.67-75
• /
• 1999

The new approach using the Peak Pattern Method was conducted for the analysis of polychlorinated biphenyls (PCBs) from the papers or paper products to provide certain hygienic data for the recycled papers as well as white papers. The height of the each peak, obtained from the PCBs standards, was transformed to the spectrum to compare with that of the samples. In addition to the results of the single PCBs standards, the pattern of mixed PCBs standards with the adequate concentration and ratios were obtained prior to the analysis of the paper samples. The test showed excellent repetition within 5% variation, and the recoveries of PCBs ranged from 92% to 97%. The PCBs, considered as a hazard material, were analyzed using the Peak Pattern Method from six different types of paper samples including the roll tissue. It could not find the same pattern of the PCBs peaks from all of the paper samples.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.31-63
• /
• 1969

A series of experiment was carried out to study on the production of disease-free seed potatoes at the Alpine Experiment Station from 1960 to 1968, which initiated a study of comparison on degeneration of plain warm region and high altitude products and the effect of latent potato virus X (PVX) and potato leaf roll virus(PLRV) on degeneration. Particular observations were made on some aspect of the nature of potato virus disease and its control such as concentrations of PVX, range of host plants, physical properties such as concentrations of PYX, range of host plants, physical properties and carrying effect of insects, by investigating 9 different areas of the main potato producing regions (Kimhae, Taegu, Choongju, Taejoen, Suwon, Kwangju, Chonju, Cheju and Chinju). Highly purified anti-serum was separated and tested for control of the virus disease and also various method of prevention and control of PLRV were observed, using cultivation of sprouted seed tubers, early harvesting method, and systemic chemicals. The results obtained are summarized as follows; 1. Potato yield in the plain region decreased by 32.8~66.3% in the first year cultivation of seed potatoes from colder region, and the rate of virus infection was 92.9 to 95.4%. 2. Plants of three families including, 20 species were susceptible to the PVX, and among the plants Salvia officinalis of a habits only was the carrier while the symptom of Digitalis purpurea of Screphulariaceae was masked. Necrosis and ring spot was occurred in most pJants of the Solanaceae and ring spot symptom also was observed in Nicotiana tabacum L. var. White Burley and in N. glutinosa. 3. The 8$C_2$ strain of virus had the following physical properties; thermal inactivation point, 68-$72^{\circ}C$ : dilution inactivation point, above 1, 000, 000 dilution: ageing in vitro, 240-360 days: and ageing in dry plant tissue, 30 days. 4. Myzus persicae and Oxya spp. did not transmit the 8$C_2$ strain of potato virus. 5. Virus was purified through the ammonium sulphate isolating method, and higher titer value, 1/2048 was obtained through anti-serum test. 6. Inhibition Chenopodiacae on the virus infection of potato was remarkable, and inhibition of local lesion host also was observed. 7, By earlier planting of sprouted seed tubers, growth period could be prolonged by 10 to 12 days. 8. Earlier harvest decreased much the rate of virus infection of seed potatoes. 9. According to the results of aphid control trial using systemic soil insecticides at Kangnung and Taekwanlyung, PSP 204, Disyston and Thimet was effective to aphid control. In particular, control effect of twice treatments of PSP 204 was great. 10. Treatmental effect of those chemicals lasted about 60-70 days. However, single foliar application of emulsified chemicals was not effective to potato virus control. 11. The effect of PSP 204, Disyston, and Thimet on the control of potato leaf roll virus was great, particularly in the case of two treatments of PSP 204, at Kangnung as well as at Taekwanlyung. Higher negative correlationship between the control effect of potato leaf roll virus and potato yield was observed showing the value r=-0.85 at Kangnung, and r=-0.87 at Taekwanlyung. 12. Differences in the control effects among PSP 204, Disyston, and Thimet was not noticed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.7-10
• /
• 2006

In order to inject satellites into a target orbit, launch vehicles should have a precise attitude and control system capable of controlling three axises of pitch, yaw and roll. For launch vehicles, there are two types of attitude control system currently in popular use; the first one is a cold gas method, and the other is a liquid propulsion system using a single and dual property propellant. The purpose of this paper is to analyze the characteristics of thrust control system using said propellant, thereby providing for a rationale for its application to the upper stages of launch vehicles, in terms of the simplicity of the system, economics of structure and operation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.05a
• /
• pp.149-151
• /
• 1994

This thesis describes the effect of heat treatment on the magnetic properties of Co-bsaed Amorphous. A sample was chosen as basic composition with Co$\_$82//Si$\_$2//B$\_$16/ of zero magnetostriction. It was made by single roll method with quartz orifice 0.5[mmø], Ar gas pressure 0.6 [kg/cm$^2$] and roll speed 28 (m/sec) and atmosphere is ,Ar gas. We obtained the sample of width 2.4(mm), thickness 45[$\mu\textrm{m}$]. Made sample annealed for the improvement of magnetic propertics at at annealing temperature 325,350,375 and 400$^{\circ}C$ and annealing time 15, 30, 45, 60 and 120min respectiveily. Amorphous ribbon of co-based showed high permeab- ility ${\mu}$=8000∼14000, and became improvement of magnetic properties according to anneal ins temperature and time. Especially. Amorphous sample at 325$^{\circ}C$ ,45min appearanced high permeability ${\mu}$=13, 589 at frequency f= 100Hz. and loss factor was reduced at low frequency with rising anneal ins ti me and temperature more annealed sample than basic sample.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.39-45
• /
• 1993

In order to analyze the rolling motion of a ship in random beam waves we have used the equivalent linearization method. The quadratic nonlinear damping, the cubic and quintic nonlinear restoring moments were added to a single degree of freedom linear equation of roll motion. The irregular excitation moment was assumed to be the Gaussian white noise. The statistical characteristic of the response by the equivalent linearization method was compared with the simulation result.

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1205-1212
• /
• 1997

The matrices which consisted of SiC whisker, PES(polyesterasulfone) as a binder, span 80(sorbitan monooleate) as a surfactant, TPP(triphenyl phosphate) as a plasticizer and dichloromethane as a solvent, have been prepared by the various methods such as tape casting, rolling, tape cast-coating and roll-coating method. The fuel cells of single stack type using these matrices are characterized by ac impedance spectroscopy and cyclic voltammetry technique. A fuel cell using a matrix prepared by the tape cast-coating method shows the best performance of 466.34 mA/$\textrm{cm}^2$ at 0.6V because it has the lowest polarization resistance at the interface between electrodes and a matrix due to the largest three phase contact region of gases, catalyst and electrolyte.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.463-470
• /
• 2015

When a camera installed on a vehicle is used, estimation of the camera pose including tilt, roll, and pan angle with respect to the world coordinate system is important to associate camera coordinates with world coordinates. Previous approaches using huge calibration patterns have the disadvantage that the calibration patterns are costly to make and install. And, previous approaches exploiting multiple vanishing points detected in a single image are not suitable for automotive applications as a scene where multiple vanishing points can be captured by a front camera is hard to find in our daily environment. This paper proposes a camera pose estimation method. It collects multiple images of lane markings while changing the horizontal angle with respect to the markings. One vanishing point, the cross point of the left and right lane marking, is detected in each image, and vanishing line is estimated based on the detected vanishing points. Finally, camera pose is estimated from the vanishing line. The proposed method is based on the fact that planar motion does not change the vanishing line of the plane and the normal vector of the plane can be estimated by the vanishing line. Experiments with large and small tilt and roll angle show that the proposed method outputs accurate estimation results respectively. It is verified by checking the lane markings are up right in the bird's eye view image when the pan angle is compensated.

• Composites Research
• /
• v.31 no.4
• /
• pp.151-155
• /
• 2018

Mechanical joint and adhesive joint are two typical joining methods for structures. The adhesive joints distribute the load over a larger area than mechanical joints and have excellent fatigue properties. However, the strength of adhesive joint greatly depends on the environmental conditions and the skill of the operator. Therefore, there is a need for techniques to evaluate the quality of the adhesive joints. The electric resistance method is a very promising technique for detecting defects by measuring the electrical resistance of an adhesive joint in which CNTs are dispersed in an adhesive. In this study, Aluminium-Aluminium adhesive single lap joint specimens were fabricated by using the adhesive dispersing CNTs using a sonicator and a 3-roll mill, and the static strengths and defect detection capabilities of the joints using the electrical resistance method were evaluated according to the CNTs content.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.1
• /
• pp.13-23
• /
• 2023

This study is an experimental study on the single group pre-post test design for the effects of the aroma inhalation method with roll-on on stress, pain, depression and blood pressure of the elderly. 33 elderly people who met the selection criteria participated among the elderly using the senior citizen clubs located in S city, Gyeonggi-do. The data collection period was from November 14, 2022 to December 19, 2022. A questionnaire consisting of stress, pain, depression, and blood pressure was measured before and after the aroma roll-on inhalation intervention. The components of aroma essential oil included Marjoram, Geranium, Peppermint and Orange sweet that were diluted in Jojoba oil which was the carrier oil. The aroma inhalation method with roll-on was carried out 3 times day for 4 weeks. In the result of this study, the aroma inhalation method with roll-on were statistically significant differences in stress(t=2.63, p=.013), pain(t=2.46, p=.019), and systolic blood pressure(t=3.01, p=.005) of the participants. Therefore, aroma roll-on therapy is expected to be available as a useful nursing intervention method for reducing stress, relieving pain, and managing blood pressure in the elderly using the senior citizen clubs.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.5
• /
• pp.31-36
• /
• 2011

In this paper, Mel-Frequency Cepstral Coefficient (MFCC), Decorrelated Filter Bank (DFB), Octave-based Spectral Contrast (OSC), Zero-Crossing Rate (ZCR), and Spectral Contract/Roll-Off are combined as a set of multiple feature-vectors for the music genre classification system based on the Support Vector Machine (SVM) classifier. In the conventional system, feature vectors for the entire genre classes are normalized for the SVM model training and classification. However, in this paper, selected feature vectors that are compared based on the One-Against-One (OAO) SVM classifier are only used for normalization. Using OSC as a single feature-vector and the multiple feature-vectors, we obtain the genre classification rates of 60.8% and 77.4%, respectively, with the conventional normalization method. Using the proposed normalization method, we obtain the increased classification rates by 8.2% and 3.3% for OSC and the multiple feature-vectors, respectively.