• Imaging Science in Dentistry
• /
• v.50 no.1
• /
• pp.31-36
• /
• 2020

Purpose: The purpose of this study was to investigate the impact of radiotherapy on mandibular bone tissue in head and neck cancer patients through an analysis of pixel intensity and fractal dimension values on digital panoramic radiographs. Materials and Methods: Thirty patients with radiographic records from before and after 3-dimensional (3D) conformational radiotherapy were selected. A single examiner carried out digital analyses of pixel intensity values and fractal dimensions, with the areas of interest unilaterally located in the right angle medullary region of the mandible below the mandibular canal and posterior to the molar region. Results: Statistically significant decreases were observed in the mean pixel intensity (P=0.0368) and fractal dimension (P=0.0495) values after radiotherapy. Conclusion: The results suggest that 3D conformational radiotherapy for head and neck cancer negatively affected the trabecular microarchitecture and mandibular bone mass.

• Journal of Korea Multimedia Society
• /
• v.19 no.6
• /
• pp.990-1002
• /
• 2016

In this paper, we propose a new compression method for the edge image by analyzing the characteristics and the distribution of pixel values of the edge image. The pixel values of the edge image have the Gaussian distribution around '0', and most of the pixel values are `0`. By these analyses we suggest the Zero-Based codec that expresses all values in a CU by a single bit flag. Also, in order to reduce the computational complexity of the proposed codec, the block partition and the intra-prediction techniques are proposed by using edge information like the number of each edge direction, the distribution and the amplitude of a major edge direction in the CU. Experimental results show that the proposed codec leads to a slighter distortion in Y domain than that of HEVC, but has far faster processing speed up to 53 times while it maintains the similar image quality compared to HEVC.

• Journal of Sensor Science and Technology
• /
• v.28 no.2
• /
• pp.133-138
• /
• 2019

The a-InGaZnO (a-IGZO) thin film transistor (TFT) has the advantages of larger mobility than that of amorphous silicon TFTs, acceptable reliability and uniformity over a large area, and low process cost. A capacitive-type touch sensor was studied with an a-IGZO TFT that can be used on the front side of a display due to its transparency. A capacitive sensor detects changes of capacitance between the surface of the finger and the sensor electrode. The capacitance varies according to the distance between the sensor plate and the touching or non-touching of the sensing electrode. A capacitive touch sensor using only one a-IGZO TFT was developed with the reduction of two bus lines, which made it easy to reduce the pixel pitch. The proposed sensor circuit maintained the amplification performance, which was investigated for various drive conditions.

• Journal of Information Processing Systems
• /
• v.18 no.1
• /
• pp.59-74
• /
• 2022

During the last decade, the security of digital images has received considerable attention in various multimedia transmission schemes. However, many current cryptosystems tend to adopt a single-layer permutation or diffusion algorithm, resulting in inadequate security. A hierarchical bilateral diffusion architecture for color image encryption is proposed in response to this issue, based on a hyperchaotic system and DNA sequence operation. Primarily, two hyperchaotic systems are adopted and combined with cipher matrixes generation algorithm to overcome exhaustive attacks. Further, the proposed architecture involves designing pixelpermutation, pixel-diffusion, and DNA (deoxyribonucleic acid) based block-diffusion algorithm, considering system security and transmission efficiency. The pixel-permutation aims to reduce the correlation of adjacent pixels and provide excellent initial conditions for subsequent diffusion procedures, while the diffusion architecture confuses the image matrix in a bilateral direction with ultra-low power consumption. The proposed system achieves preferable number of pixel change rate (NPCR) and unified average changing intensity (UACI) of 99.61% and 33.46%, and a lower encryption time of 3.30 seconds, which performs better than some current image encryption algorithms. The simulated results and security analysis demonstrate that the proposed mechanism can resist various potential attacks with comparatively low computational time consumption.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.246-251
• /
• 2014

In this paper, a high-speed CMOS Image Sensor (CIS) based on a 10-bit two step Single Slope A/D Converter (SS-ADC) is proposed. The A/D converter is composed of both 5-bit coarse ADC and a 6-bit fine ADC, and the conversion speed is 10 times faster than that of the single-slope A/D convertor. In order to reduce the pixel noise, further, a Hybrid Correlated Double Sampling (H-CDS) is also discussed. The proposed A/D converter has been fabricated with 0.13um 1-poly 4-metal CIS process, and it has a QVGA ($320{\times}240$) resolution. The fabricated chip size is $5mm{\times}3mm$, and the power consumption is about 35 mW at 3.3 V supply voltage. The measured conversion speed is 10 us, and the frame rate is 220 frames/s.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1068-1071
• /
• 2007

When a dielectric layer, in-cell retarder (ICR) is formed between electrode and LC layer to get a single gap transflective fringe-field switching (FFS) display, the operating voltage ($V_{op}$) is highly increased due to the thickness of dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the Vop and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.421-422
• /
• 2007

The fringe electric field driven transflective liquid crystal display with dual orientation has a problem that the voltage-dependent transmittance and reflectance curves do not match each other, requiring a dual driving circuit to achieve a high electro-optic performance. Optimizations of the electrode structure in the array substrate and rubbing direction solve this problem so that the transflective display with a single gap and a single gamma curve for reflective and transmissive region is possible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.435-436
• /
• 2007

In general, Single gap transflective FFS display has an in-cell retarder (ICR) between reflective electrode and liquid crystal (LC) layer. Therefore, Operating voltage is highly increased due to this thick dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the V op and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.533-535
• /
• 2015

안개 제거 알고리즘은 single image에서 대기값(Airlight)와 대기의 빛 전달량(Transmission)을 추정하여 안개로 인한 빛의 산란에 의해 생긴 Contrast 감소 및 채도의 왜곡과 같은 영상 왜곡을 보정해줌으로써 안개 영상에서 안개를 효과적으로 제거해준다. 하지만 기존의 안개 제거 알고리즘은 안개 영상에 특화되었기 때문에 안개가 없는 영상에 알고리즘을 시행 할 경우 색상과 명암에 왜곡을 불러 일으킬 수 있다. 이에 따라 알고리즘을 수행하기 앞서 안개 량을 측정하고 그 결과에 따라 안개 제거 알고리즘에 제거 정도 가중치나 알고리즘 수행 여부를 판단할 필요가 있다. 본 논문은 기존 안개 제거 알고리즘들이 영상의 patch를 사용하여 빛 전달량(Transmission)을 추정한다는 것을 이용하여 빛 전달량을 구함과 동시에 안개 량을 판단하는 알고리즘을 개발하였다. 안개량을 측정하기 위해 각 patch의 pixel 분포 특성과 patch의 빛 전달량(Transmission)을 구하기 위한 특정 값과 실제 pixel의 명암(Intensity)을 비교하여 안개 량을 측정한다.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.119-122
• /
• 2010

This paper proposes a transflective liquid crystal display (LCD) in a whole-pixel switchable configuration with a high aperture ratio using an electrophoretic particle layer (EPL). The switchable transflective LCD consisted of the liquid crystal layer as a display unit, and the EPL as a switchable mirror. The switching of the EPL between the mirror for the reflective mode and the transparency for the transmissive mode was performed by controlling electrophoretic nanoparticles with an applied voltage in a three-electrode structure. The single pixel was used as the whole transmissive or reflective mode that corresponded to the switchable EPL mirror. Thus, a transflective LCD with a high aperture ratio was obtained.