• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.695-702
• /
• 2002

Shotcrete (or Sprayed concrete) has been used as an important support material in New Austrian Tunnelling Method (NATM). Since the mid of 1990, permanent shotcrete tunnel linings such as Single-shell, NMT (Norwegian Method of Tunnelling) has been constructed in many countries for reducing the construction time and lowing construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of permanent shotcrcte linings, high performance shotcrete providing high strength, high durability, better pumpability has to be developed in advance as an integral component. This paper presents the Ideas and first experimental attempts to increase early strength and bond strength of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) in sump water condition. In order to increase early strength, a new approach using high-early strength cement with liquid alkali-free accelerator has been investigated From the results, wet-mix SFRS with high-early strength cement and alkali-free accelerator exhibited excellent early strength improvement compared to the ordinary portland content and good bond strength even under sump water condition.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.201-204
• /
• 2000

In this paper, an A/D converter is implemented to obtain 8bit resolution at a conversion rate of 10Msample/s. This architecture is proposed using the 2-step architecture for high speed conversion rate. It is consisted of sample/hold circuit, low power comparator, voltage reference circuit and DAC of binary weighted capacitor array. Proposed A/D converter is designed using 0.2$\mu\textrm{m}$ CMOS technology. The SNR is 45.3dB at a sampling rate of 10MHz with 1.95MHz sine input signal. When an 8bit 10Msample/s A/D converter is simulated, the Differential Nonlinearity / Integral Nonlinearity (DNL/ INL) error are ${\pm}$1 / ${\pm}$2 LSB, respectively. The power consumption is 13㎽ at single +2.5V supply voltage.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• ETRI Journal
• /
• v.10 no.1
• /
• pp.3-13
• /
• 1988

With the contunuing trends towards an information based society, telecommunications services are becoming an integral part of social activities. So, emphasis on ISDN is growing rapidly and placed on supporting integrated services delivery of different levels to the end user. The end user’s perception of an integraged services delivery(in particular, ISDN services) should reflect three interrelated capabilities, ISDN access capabilities and ISDN network capabilities. For turning the ISDN concept of above capabilities into reality, we have implemented the experimental system on user-network interfaces, which are three kinds of implementations in user access arrangements, namely basic access, intermediate rate multiplexed access and primary rate multiplexed access. Through these implementations, NTE(Network Terminating Equipment) is used for single basic access [2B+D], IMUX (Intermediate rate Multiplexer) for 4 basic accesses [4X(2B+D)] and PMUX(Primary rate Multiplexer) for [10/12 X (2B+D)]. This paper describes the outlines of system features on user access equipments, system architectures of testbed and experiment result of each access arrangements.

• Management & Information Systems Review
• /
• v.9
• /
• pp.117-137
• /
• 2002

As attention to the Internet from both companies and individuals is rapidly on the increase, hundreds of new websites are opening in a single day. Along with such a high attention to the Internet, to set up an effective website needs efficient evaluation and reliable evaluation criterions for the website. The existing homepage contests and evaluation models are limited to certain websites in a special field or to the systemic side and to the contents, which in fact weakened the development of detailed evaluation sections and items possibly measured. This study is designed to integrate and seek out methods and success factors that should be considered when a website is built up, discovering evaluation criterions and making evaluation models objectively possible to be measured. The study focused on investigation into a new measurement standard and model by considering the previous studies, in order to suggest the followings: Centering the 7 top evaluation sections by type of each website such as (1) Service, (2) Mechanism, (3) Structure & Navigation, (4) Usability, (5) Contents (6) Community, (7) Communication, the study suggests an objective and reasonable website evaluation model on a basis of common factors considered in an integral and optimum view.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.9
• /
• pp.835-842
• /
• 2000

Film boiling heat transfer of the subcooled turbulent liquid film flow on a horizontal plate was investigated by theoretical and experimental studies. In the theoretical analysis, by solving the integral energy and momentum equations analytically, some generalized expressions for Nusselt number was deduced. Next, by comparing the deduced equations with the experimental data on the turbulent film boiling heat transfer of the subcooled thin liquid film flow, the semi-empirical relation between the Nusselt number based on the modified heat transfer coefficient and the Reynolds number was obtained. The correlating equation was very similar to that of the turbulent heat transfer in a single phase flow, and it was found that the heat transfer was dissipated to increase the liquid temperature.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.63-68
• /
• 2001

SG-365 steel is an important material and used for manufacturing a pressure vessel which the gas piping. In this investigation, the elastic plastic fracture toughness of this material is evaluated by the an unloading compliance method according to the ATM E813-97 method on the smooth and side groove 1CT specimens. The effect of smooth and side groove is studied on the elastic plastic fracture toughness. The side grooved specimen is very useful in estimation of the $J_IC. Because it is much easier than the smooth specimen to the onset of the ductile tearing by the R curve method. Besides, it improves the accuracy of toughness values, decreases the scattering of them and tunneling and shear lip by the side groove.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.2
• /
• pp.259-264
• /
• 2003

One Clausius inequality based on an apparatus with a single thermal reservoir is reviewed. Some intricate issues regarding the apparatus are brought up and therefore a preferred way to interpret the Kelvin-Planck statement is suggested. Then it is shown that another Clausius inequality can be established from a direct application of the proposition regarding the efficiency of a Carnot cycle. The establishment is based on an apparatus with two reservoirs, and the resultant inequality involves the temperature of external reservoir. Finally, a different apparatus which also has two thermal reservoirs is utilized to compare the cyclic integral of the former inequality with the one of the latter resulting in the proof of the former inequality which involves the temperature at the system boundary. The applications and limitations of these two Clausius inequalities are discussed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.8-13
• /
• 2007

The purpose of this study is to reduced the weight of ladder boom and to improve the manufactor process by the section modification. The Conventional model consists of integral section stiffener, while the proposed model consists of truss type stiffener to reduce the weight of ladder boom and wind effector. In the two analysis models, one is based on the single boom, and the other is based in the coupling model of two booms. We present the analysis results for the case when applying the weight, bending and twisting moment and wind pressure. Finally, a comparison between these results is presented to show the performance of our method.

• Journal of Ecology and Environment
• /
• v.36 no.1
• /
• pp.89-94
• /
• 2013

Diatoms have become an integral part of the UK's freshwater monitoring strategy over the past two decades, mostly in response to increasingly stringent European Union (EU) legislation. The use of diatoms is based on strong correlations between diatom assemblages and environmental variables, and from knowledge of the "expected" (= "reference") state of each river. The nationwide overview of the ecological health of rivers this gives allows those stretches of rivers which fail to meet EU criteria to be identified. This, in turn, allows appropriate remediation measures to be planned. Because diatom assemblages vary in space and time, even within a single water body, effective use of diatoms requires a consistent approach in order to minimise uncertainty. This includes the use of methods which comply with European Standards, a training and accreditation scheme for analysts, and a suite of quality assurance methods. Those aspects of uncertainty that cannot be readily controlled have been quantified and all estimates of ecological status are accompanied by the appropriate "confidence of class" and "risk of misclassification". This, in turn, helps planners prioritise those locations which are most likely to benefit from remediation.