• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.14-17
• /
• 2014

In this study, lead-free Piezoelectric $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ ceramics were fabricated using mixed oxide method and the effects of various sintering temperature on the structural and electrical properties were investigated. For the $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ (NKN-SCT-$MnO_2$) ceramics sintered at temperatures of $1,025{\sim}1,100^{\circ}C$. The results indicated that all specimens were perovskite single phase formation without any second phase. It has been shown that relative density is increased to increasing sintering temperature. When the sintered temperature at $1,075^{\circ}C$, highest sintered density and maximum value of $4.45g/cm^3$. Average grain size is increased to increasing sintering temperature. The electromechanical coupling factor, dielectric constant, dielectric loss, d33 and curie temperature at the sintering temperature $1,075^{\circ}C$ of NKN-SCT-$MnO_2$ specimens were 0.22, 511, 0.033, 103 and $380^{\circ}C$, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.8
• /
• pp.1132-1137
• /
• 2012

Objective of this experiment was to evaluate the effect of partial substitution of barley grain with bread by-product (BB) on performance of Awassi ewes and their lambs. Forty Awassi ewes rearing single lambs were randomly allotted into four experimental diets containing various levels of BB. The experimental diets contained 0 (BB0), 10 (BB10), 15 (BB15), and 20% (BB20) of BB on dietary dry matter (DM). The study lasted for eight weeks, in which the first week was used as an adaptation period and seven weeks of data collection. Ewes and their lambs were penned individually where they were fed their lactating diets ad libitum. Ewes and lambs body weights were measured at the beginning and at the end of the experiment. However, milk production and composition were evaluated biweekly. Feeding BB had no effect (p>0.05) on dry matter (DM), organic matter (OM), and crude protein (CP) intakes. However, neutral detergent fiber (NDF) intake was the lowest (p<0.05) for the BB20 and BB15 diets followed to BB10 diet (i.e., 640, 677, 772 g/d, respectively) while the highest NDF intake was for the BB0 diet (i.e., 825 g/d). Similarly, NDF intake decreased linearly (p<0.001) as the BB content increased. Acid detergent fiber (ADF) intake was highest (p<0.05) for the BB0 and BB10 diets (425 and 416 g/d, respectively) followed by the BB15 and BB20 diets (359 and 342 g/d, respectively). Moreover, a linear (p<0.001), quadratic (p = 0.04), and cubic (p = 0.04) effects were observed in ADF intake among diets. Nutrient digestibility was similar among different diets. Bread by-product had no effect (p>0.05) on ewes body weight change and on lamb performance (i.e., weaning body weight and average daily gain). Similarly, no differences (p>0.05) were observed either in milk production or composition by the BB substitution. Inclusion of BB reduced feed cost by 9, 14, and 18% for the BB10, BB15, and BB20 diets, respectively. No differences were observed in milk efficiency (DM intake: milk production; p>0.05) among diets. However, cost of milk production ($US/kg milk) was the lowest (p<0.05) in the diet containing BB20. Results of the present study indicate that feeding bread by-product up to 20% of the diet DM had no effect on performance of Awassi ewes and their lambs and reduced feed cost.

• Korean Journal of Materials Research
• /
• v.21 no.9
• /
• pp.497-501
• /
• 2011

The CdS thin film used as a window layer in the CdTe thin film solar cell transports photo-generated electrons to the front contact and forms a p-n junction with the CdTe layer. This is why the electrical, optical, and surface properties of the CdS thin film influence the efficiency of the CdTe thin film solar cell. When CdTe thin film solar cells are fabricated, a heat treatment is done to improve the qualities of the CdS thin films. Of the many types of heat treatments, the $CdCl_2$ heat treatment is most widely used because the grain size in CdS thin films increases and interdiffusion between the CdS and the CdTe layer is prevented by the heat treatment. To investigate the changes in the electrical, optical, and surface properties and the crystallinity of the CdS thin films due to heat treatment, CdS thin films were deposited on FTO/glass substrates by the rf magnetron sputtering technique, and then a $CdCl_2$ heat treatment was carried out. After the $CdCl_2$ heat treatment, the clustershaped grains in the CdS thin film increased in size and their boundaries became faint. XRD results show that the crystallinity improved and the crystalline size increased from 15 to 42 nm. The resistivity of the CdS single layer decreased from 3.87 to 0.26 ${\Omega}cm$, and the transmittance in the visible region increased from 64% to 74%.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.654-660
• /
• 2010

The influences of Na and K content on the crystal phase, the microstructure and the electrical property of $BaTiO_3$-based thermistors was found to show typical PTC effects. The crystal phase of powder calcined at $1000^{\circ}C$ for 4hrs showed a single phase with $BaTiO_3$, and the crystal structure was transformed from tetragonal to cubic phase according to added amounts of Na and K. In XRD results at $43^{\circ}\sim47^{\circ}$, the $(Ba_{0.858}Na_{0.071}K_{0.071})(Ti_{0.9985}Nb_{0.0015})O_{3-\delta}$ showed (002) and (200) peaks but the $(Ba_{0.762}Na_{0.119}K_{0.119})(Ti_{0.9975}Nb_{0.0025})O_{3-\delta}$ showed (002), (020) and (200) peaks. In sintered bodies, those calcined at $600^{\circ}C$ rather than at $1000^{\circ}C$ were dense, and for certain amounts of Na and K showed rapid decreases in grain size. In relative permittivity, the curie temperature due to the transformation of ferroelectric phase rose with added Na and K but decreased in terms of relative permittivity. In the result of the R-T curve, the sintered bodies have curie temperatures of about $140^{\circ}C$ and the resistivity of sintered bodies have scores of $\Omega{\cdot}cm$; the jump order of sintered bodies was shown to be more than $10^4$ in powder calcined at $1000^{\circ}C$.

• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.804-809
• /
• 1999

Silica films were prepared on Si single crystal substrates by a sol-gel process without DMF using TEOS as a starting material. Films were fabricated by spin coating technique. For films having a composition of TEOS : HCI(1:0.05mol), gelation time, the thickness of films, the formation of cracks and the microstructure of the films were investigated as a function of the molar ratio of $CH_3OH and H_2O$. With 8mol $CH_3OH$, the longest gelation time was measured to be 640hr. The thickness of the coated films was decreased with increasing content of $CH_3OH$. The films were sintered at $500^{\circ}C$ for 1hr with a heating rate of $0.6^{\circ}C$/min. The coated films showed worm-like grains and partially cracked microstructures at an amount of $CH_3OH$ 2mol and 4mol. The addition of more than 8 mole of $CH_2OH$ resulted in crack-free silica films. This suggests that crack-free films can be fabricated by controlling the surface tension energy of the sol solutions without DMF.

• Korean Journal of Weed Science
• /
• v.9 no.1
• /
• pp.39-45
• /
• 1989

An experiment was conducted at the Yeongnam Crop Experiment Station for 4 years from 1985 to understand the effect of repeated use of same herbicide on weed growth. For this, the most common 6 herbicides, butachlor, bifenox, butachlor/pyrazolate, piperophos/dimethametryne, bentazon and propanil were used as single treatment or combination treatment. For non chemical plots, weed occurrence was rapidly increased with time in terms of number and weight. However no rice plot recorded the least increasing ratio. Similar trend was obtained at the herbicide plot even though the increasing ratio varied by herbicide properties. The least increasing ratio (1200 was recorded at the plot of butachlor/pyrazolate (5 days after transplanting, 5 DAT) followed by bentazon+propanil(25 DAT) while the greatest ratio (28%) was obtained from the plot of bifenox (5 DAT). In general, Scirpus hotarui, Eleocharis kuroguwai and Cyperus serotinus was gradually inereased with time by herbicide application, particularly at the butachlor/pyrazolate treatment. The community dominance and simpson index increased at the plot of bentazon and propanil due to increased of particular species while other herbicide plots exhibited reverse trend. Grain yield was curvilinearly decreased with weed weight for both times, 40 DAT and heading time eventhough the correlation coefficient of heading time was higher than 40 DAT.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.705-710
• /
• 2015

The fabrication process of thin boron-doped nanocrystalline diamond (B-NCD) microelectrodes on fused silica single mode optical fiber cladding has been investigated. The B-NCD films were deposited on the fibers using Microwave Plasma Assisted Chemical Vapor Deposition (MW PA CVD) at glass substrate temperature of 475 ℃. We have obtained homogenous, continuous and polycrystalline surface morphology with high sp³ content in B-NCD films and mean grain size in the range of 100-250 nm. The films deposited on the glass reference samples exhibit high refractive index (n=2.05 at λ=550 nm) and low extinction coefficient. Furthermore, cyclic voltammograms (CV) were recorded to determine the electrochemical window and reaction reversibility at the B-NCD fiber-based electrode. CV measurements in aqueous media consisting of 5 mM K₃[Fe(CN)₆] in 0.5 M Na₂SO₄ demonstrated a width of the electrochemical window up to 1.03 V and relatively fast kinetics expressed by a redox peak splitting below 500 mV. Moreover, thanks to high-n B-NCD overlay, the coated fibers can be also used for enhancing the sensitivity of long-period gratings (LPGs) induced in the fiber. The LPG is capable of measuring variations in refractive index of the surrounding liquid by tracing the shift in resonance appearing in the transmitted spectrum. Possible combined CV and LPG-based measurements are discussed in this work.

• Food Science and Preservation
• /
• v.24 no.5
• /
• pp.697-706
• /
• 2017

The purpose of this study was to investigate the physiochemical properties of Doenjang was fermented by added with fungi and protease. The moisture content and pH of Doenjang added with protease (WP) were lower than those of control w/o protease while the contents of titratable acidity, reducing sugar, and amino-type nitrogen in WP were higher than control. The ${\alpha}$-amylase activities of Doenjang added with single and mixed Protease B were the highest at 4 weeks of fermentation period and protease activity of WP was about 4 times higher than that of control. The 4-9 kinds of free amino acids (proline, isoleucine, leucine, and phenylalanine etc.) in WP was increased in comparison with control. The DPPH radical scavenging activity and total polyphenol content were higher in WP than control. Total aerobic bacterial and fungal numbers were decreased depending on fermentation time regardless of addition of protease. In conclusion, the protease can be used as additives improving the quality and taste of fermented Doenjang.

• Korean Journal of Crystallography
• /
• v.13 no.3_4
• /
• pp.165-171
• /
• 2002

Single phase $Pb(Fe_{1/2}Ta_{1/2})O_3$, ceramics were successfully synthesized from the powders prepared by solid state reaction (sintering temperature: $1100^{\circ}C$, density: $9.3g/cm^3$, average grain size: $5.1{\pm}1.2mm$, space group: Pm3m). Their dielectric properties measured at $-150{\sim}50^{\circ}C$ showed the maximum relative dielectric constant of 31000 at $-41^{\circ}C$. 1 kHz, and typical relaxor ferroelectrics characteristics such as diffuse phase transition and dielectric relaxation phenomena. However, the diffuseness of phase transition decreased and the dielectric properties became more normal ferroelectrics as the time of annealing at $1000^{\circ}C$ increased. By using Raman spectroscopy, it was revealed that the $Fe^{3+}$ and $Ta^{5+}$ ions in the as-sintered $Pb(Fe_{1/2}Ta_{1/2})O_3$, are stoichiometrically 1 : 1 ordered within the short-range that can not be probed even by transmission electron microscopy, and this stoichiometric 1 : 1 ordering is enhanced by the annealing. The relaxor ferroelectric characteristics in the as-sintered $Pb(Fe_{1/2}Ta_{1/2})O_3$, could be correlated with the stoichiometric 1 : 1 short-range ordering of B-site cations, and the decrease of relaxor ferroelectric characteristics in the annealed $Pb(Fe_{1/2}Ta_{1/2})O_3$ could be correlated with the enhanced stoichiometric 1 : 1 short-range ordering of B-site cations.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3011-3015
• /
• 2009

Structural and thermo-analytical studies were carried out to understand the phase formation kinetics of the single phase $Bi_5Ti_3FeO_{15}$ (BTFO) nanocrystals in $Bi_2O_3-Fe_2O_3-TiO_2$, during the polymerized complex (PC) synthesis method. The crystallization of Aurivillius phase $Bi_5Ti_3FeO_{15}$ layered perovskite was found to be initiated and achieved under the temperature conditions in the range of ${\sim}$800 to 1050$^{\circ}C$. The activation energy for grain growth of $Bi_5Ti_3FeO_{15}$ nanocrystals (NCs) was very low in case of NCs formed by PC (2.61 kJ/mol) than that formed by the solid state reaction (SSR) method (10.9 kJ/mol). The energy involved in the phase transformation of Aurivillius phase $Bi_5Ti_3FeO_{15}$ from $Bi_2O_3-Fe_2O_3-TiO_2$ system was ${\sim}$ 69.8 kJ/mol. The formation kinetics study of $Bi_5Ti_3FeO_{15}$ synthesized by SSR and PC methods would not only render a large impact in the nanocrystalline material development but also in achieving highly efficient visible photocatalysts.