• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.681-686
• /
• 1994

Microwave Detector Using $YBa_{2}Cu_{3}O_{7-x}$, Grain Boundary Junction $YBa_{2}Cu_{3}O_{7-x}$ superconductor thin films were deposited on $LaAIO_{3}$ (100) single crystal substrates using a metal organic chemical vapor deposition (MOCVD) method. These films showed the critical temperature of about 9OK and critical current density of over $10^5/A \textrm{cm}^2$at 77K. These films showed granular structure with 0.5~1.5$\mu \textrm{m}$ grains. Bridge-type junctions, 6$\mu \textrm{m}$ in width and 6pm in length, were fabricated using the photolithography and the Ar ion milling techniques. Current-voltage (I-V) characteristics of these junctions with the microwave irradiation at 77K were studied. The critical current densities decreased as the irradiated microwave power increased. When microwaves were irradiated on the bridge at 77K. the I-V charateristics showed constant voltage stcp(Shapiro steps) at $\Delta$=nho/2e.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.86-91
• /
• 1999

We have fabricated high-$\textrm{T}_c$ superconducting $\textrm{YBa}_{2}\textrm{Cu}_{3}\textrm{O}_{7-x}$(YBCO) grain boundary junctions at a step-edge on (001) $\textrm{SrTiO}_3$(STO) substrates. A diamond-like carbon (DLC) film grown by plasma enhanced chemical vapor deposition were used as an ion milling mask to make steps on the STO (100) single crystal and was removed by an oxygen reactive ion etch process. The c-axis oriented YBCO and TO thin films were deposited epitaxially on the STO substrate with a step-edge by pulsed laser deposition. The grain boundary junctions were formed at the top and the bottom of the step. The junctions worked at temperatures above 77 K, and had I\ulcornerR\ulcorner products of 7.5mV at 16K and 0.3 mV at 77K, respectively. The I-V characteristics of these junctions showed the shape of the two noisy resistively shunted junction model.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.3
• /
• pp.193-203
• /
• 2005

Highly c-axis oriented nanocrystalline ZnO thin films on silica glass substrates were prepared by spin coating-pyrolysis process with a zinc naphthenate precursor. Only the XRD intensity peak of (002) phase was observed for all samples. With an increase in heat treatment temperature, the peak intensity of (002) phase increases. No significant aggregation of particle was present. From scanning probe microscopy analyses, three-dimensional grain growth, which was thought to be due to inhomogeneous substrate surface and c-axis oriented grain growth of the ZnO phase, was independent on heal-treatment temperature. Highly homogeneous surface of the highly-oriented ZnO film was observed at $800^{\circ}C$. All the films exhibited a high transmittance (above 80%) in visible region except film heat treated at $1000^{\circ}C$, and showed a sharp fundamental absorption edge at about $0.38{\sim}0.40{\mu}m$. The estimated energy band gap for all the films were within the range previously reported for films and single crystal. ZnO films, consisting of densely packed grains with smooth surface morphology were obtained by heat treatment at $600^{\circ}C{\sim}800^{\circ}C$, expected to be ideal for practical application, such as transparent conductive film and optical device.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.135-141
• /
• 2013

Mechanical alloying was carried out to produce $CrSi_2$ thermoelectric compound using a mixture of elemental $Cr_{33}Si_{67}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of $CrSi_2$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry measurement. $CrSi_2$ intermetallic compound with a grain size of 70 nm could be obtained by MA of $Cr_{33}Si_{67}$ powders for 70 hours and subsequently annealed at $650^{\circ}C$. Consolidation of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $600{\sim}1000^{\circ}C$ under 60 MPa. The shrinkage of MA samples during SPS consolidation process increased gradually with increasing temperature up to $1000^{\circ}C$ and relatively significant at about $600^{\circ}C$. We tend to believe that these behaviors are deeply related to form a $CrSi_2$ compound during heating process, as can be realized from the DSC measurement. Electrical conductivity and Seebeck coefficient of sintered bodies were measured up to $900^{\circ}C$. Seebeck coefficient and power factor of $Cr_{33}Si_{67}$ compact prepared by MA and SPS at $1000^{\circ}C$ showed the maximum value of $125{\mu}V/K$ at $400^{\circ}C$ and $4.3{\times}10^{-4}W/mK^2$ at $350^{\circ}C$, respectively.

• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.41-45
• /
• 2002

The low-field tunnel-type magnetoresistance (MR) properties of sol-gel derived $La_{0.7}Pb_{0.3}MnO_3(LPMO)$ thin film deposited on different substrate have been investigated. Polycrystalline thin films were fabricated by spin-coating on $SiO_2/Si(100)$ substrate and that with yttria-stabilized zirconia (YSZ) buffer layer, while c-axis-oriented thim film was grown on $LaAlO_3(001)$ (LAO) single crystal substrate. The full width half maximum (FWHM) of the rocking curve scan of LPMO/LAO film is $0.32^{\circ}$. Tunnel-type MR ratio is 0.52 % in $LPMO/SiO_2/Si$(100) film and that of $LPMO/YSZ/SiO_2/Si$(100) film is as high as 0.68 %, whereas that of LPMO/LAO(001) film is less than 0.4 % under the applied field of 500 Oe at 300 K. Well-pronounced MR hysteresis was registered with an MR peak in the vicinity of the coercive field. The low-field tunnel-type MR characteristics of thin films deposited on different substrates originates from the behavior of grain boundary properties.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.11-23
• /
• 2020

This study aims to investigate breakage and liberation characteristics of iron ore from Shinyemi mine, Jeongseon by ball mill. Parameters of breakage functions for three grade samples of iron ore were obtained using single-sized-feed breakage test and back-calculation based on nonlinear programming. The results showed that with the increase in the grade of iron ore, the breakage rate factor decrease whereas the particle size sensitivity decreases. This results from retardation of microcrack-propagation by magnetite grain in the ore. Breakage distribution analysis showed that the breakage mechanism appear to be impact fracture dominant with the increase of grade owing to the stress distribution effect by magnetite grain. Degree of liberation (DOL) increased with the increase in grade and decrease in particle size, respectively. Using the breakage function and size-DOL relationship, a model that can predict time-dependent-DOL is established. When scale-up factors from operating condition are available, the model is expected to be capable of predicting size and DOL with time in actual mining process.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.4
• /
• pp.269-274
• /
• 2014

Series of field experiments were conducted to evaluate the long term effect of gypsum and crop residue on crop yield and soil health in rice-wheat crop rotation system in salt affected soil. A saline-sodic field having $EC_e$ (electrical conductivity of the saturation extract) 4.77 ($dSm^{-1}$); pH ($H_2O$) 8.96; SAR 43.78 ($mmol\;L^{-1}$) and gypsum requirement (G.R.) 2.86 (Mg $acre^{-1}$) was selected on Soil Salinity Research Institute Farm. Five treatments consisting of ($T_1$) control, ($T_2$) gypsum at 100% G.R., ($T_3$) gypsum at 25% G.R. + wheat straw at $3Mg\;ha^{-1}$, ($T_4$) gypsum at 25% G.R. + rice straw at $3Mg\;ha^{-1}$, ($T_5$) gypsum at 25% G.R.+ rice and wheat straw at $3Mg\;ha^{-1}$ were replicated four times under completely randomized block design. The data indicated that grain and straw yield of rice and wheat was significantly (P<0.05) increased by all the amendments used either single or in combination. $T_2$ (gypsum at 100% G.R.) significantly (P<0.05) increased grain and straw yield of rice and wheat crops followed by $T_3$ (gypsum at 25% G.R. + wheat straw at $3Mg\;ha^{-1}$) when compared with control. Soil properties were also improved by used amendments, pronounced decreased in $EC_e$, $pH_s$ and SAR were recorded in $T_2$ followed by $T_3$. The efficiency of the treatments could be arranged in following order gypsum at 100% G.R.> gypsum at 25% G.R. + wheat straw at $3Mg\;ha^{-1}$ > gypsum at 25% G.R. + rice and wheat straw at $3Mg\;ha^{-1}$ > gypsum at 25% G.R. + rice straw at $3Mg\;ha^{-1}$ > control.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.2
• /
• pp.96-103
• /
• 2019

BACKGROUND: This study was conducted to develop selenium (Se)- and germanium (Ge)-enriched rice by foliar spray application of organic or inorganic Se and Ge. METHODS AND RESULTS: The time and frequency of organic or inorganic Se and Ge treatment were performed at the five main growth stages as followings: effective tillering stage (E), maximum tillering stage (M), booting stage (B), heading stage (H), grain filling stage (G). The main treatment plots were consisted of (1) 'once' treatment (at each E, M, B, H, G stage, Se/Ge single apply), (2) 'twice I' (at H + G stages, organic or inorganic Se/Ge apply), (3) 'twice II' (at H + G stages, mixture apply of Se + Ge + pesticide). The organic or inorganic Se treatment concentration was 20 and 40 ppm, and the Ge was 50 and 100 ppm. The Se and Ge contents in rice grain (brown rice and polished rice) were analyzed by inductively coupled plasma (ICP). The highest Se content was noted in brown rice 'twice I' with Se 40 ppm (1394.06) at H + G stages, but the lowest was in 'once' with Se 40 ppm ($367.79{\mu}g{\cdot}kg^{-1}$) at B stage. The highest of Se content in polished rice was found in 'twice I' of Se 40 ppm (1090.25) at H + G stages, but the lowest was in 'once' with Se 40 ppm ($403.53{\mu}g{\cdot}kg^{-1}$) at E stage. On the other hand, The highest of Ge content in brown rice was found in 'twice I' with Ge 100 ppm (398.66) at H + G stages, but the lowest was in 'once' with Ge 100 ppm ($139.64{\mu}g{\cdot}kg^{-1}$) at B stage. The highest of Ge content in polished rice was found in 'twice I' of Ge 100 ppm (300.29) at H + G stages, but the lowest was in 'once' with Ge 100 ppm ($142.24{\mu}g{\cdot}kg^{-1}$) at B stage. CONCLUSION: Se and Ge contents both in brown rice and polished rice treated with organic Se and Ge forms were higher than those of inorganic Se and Ge. Overall results concluded that the supplementation of organic Se and Ge contents in brown and polished rice contents were comparatively higher than the inorganic Se and Ge. This is results also proved that the foliar spray application of organic Se and Ge has positive nutritive effect on the rice for regular consumption.

• Korean Journal of Poultry Science
• /
• v.35 no.2
• /
• pp.171-176
• /
• 2008

Animal welfare advocates, claim that the induced molting by fasting be avoided. This study was conducted to evaluate the effect of molting induced by various feeding methods on productivity and egg quality in laying hens. We used 400 flocks of 60-week-old leghorn laying hens in four treatments(five replicates of 20 hens each): fasting method (C), feeding single corn grain diet (T1), feeding single wheat bran diet (T2) and feeding single alfalfa meal diet (T3). As the result of the experiment, egg production and daily egg mass significantly decreased only in T1 compared with the control during the $1{\sim}4th$ week after the secondary egg laying (P<0.05). Although the amount of feed intake was significantly less in T1 group during the $1{\sim}4th$ week compared to the control, no significant difference was detected during the total period (P>0.05). In addition, no significant difference of feed conversion was observed between treatment groups. In terms of egg quality, the egg shell thickness was significantly improved in T1 group than the control group by feeding only corn at the 10th and 14th week after the secondary egg laying (P<0.05), but the significant decrease was observed at the corn (T1) and wheat bran (T2) fed treatment groups than the control group at the 26th week of the experiment (P<0.05). The eggshell strength and haugh unit did not show any difference by the molting methods. Egg yolk color was significantly decreased in T1 and T2 group than the control group at the 6th week (P<0.05). However, T1 and T2 group resulted to show significantly high egg yolk color at the 18th week of the experiment (P<0.05). As the result of the experiment, no large difference was observed in the productivity by the feeding molting method and by the fasting induced molting method. In addition, the single diet fed feeding induced molting method by using alfalfa revealed to show more satisfactory trend than the corn or wheat bran single diet fed feeding induced molting methods even if no statistically significant difference was found in terms of egg productivity.

• Korean Journal of Materials Research
• /
• v.18 no.12
• /
• pp.655-659
• /
• 2008

The NO gas sensing properties of ZnO-carbon nanotube (ZnO-CNT) composites fabricated by the coaxial coating of single-walled CNTs with ZnO were investigated using pulsed laser deposition. Upon examination, the morphology and crystallinity of the ZnO-CNT composites showed that CNTs were uniformly coated with polycrystalline ZnO with a grain size as small as 5-10 nm. Gas sensing measurements clearly indicated a remarkable enhancement of the sensitivity of ZnO-CNT composites for NO gas compared to that of ZnO films while maintaining the strong sensing stability of the composites, properties that CNT-based sensing materials do not have. The enhanced gas sensing properties of the ZnO-CNT composites are attributed to an increase in the surface adsorption area of the ZnO layer via the coating by CNTs of a high surface-to-volume ratio structure. These results suggest that the ZnO-CNT composite is a promising template for novel solid-state semiconducting gas sensors.