• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1480-1482
• /
• 2005

The major causes of power quality deterioration are harmonic current through semiconductor switching device, due to use of nonlinear loads such as diodes rectifier or thyristor rectifiers. In response to this concerns, this paper presents a new control method of single-phase active power filter(APF) for the compensation of harmonic current components in nonlinear loads. In order to make the complex calculation to be possible, the single-phase system that has two phases was made by constructing a imaginary second-phase giving time delay to load currents. In the conventional method, a imaginary-phase lagged to the load current T/4(here T is the fundamental cycle) was made. But in this proposed method, the new signal, which has the delayed phase through the filter, using the phase-delay property of low-pass filter, was used as the second phase. As this control method is applied to the system of single phase, an instantaneous calculation was done rather by using the rotating reference frames that synchronizes with source-frequency than by applying instantaneous reactive power theory that uses the conventional fixed reference frames.

• 지질공학
• /
• 제26권3호
• /
• pp.361-370
• /
• 2016

본 연구는 실내시험을 통해 필터층을 가진 충적층 지하수 정호에 대한 효율을 평가하기 위해 수행하였다. 이중필터층과 단일필터층을 모사한 시험장치를 제작하여 시험 및 분석을 수행하여 초기취수량, 취수효율, 장기적인 안정성에 대해 평가하였다. 시험결과 초기 60분 이내 취수량을 분석하면, 이중필터를 설치한 경우에는 그렇지 않은 경우보다 초기 취수량이 약 19.4% 증가하는 것으로 분석되었으며, 시험 후 24시간이 경과한 후 취수량을 분석한 결과 이중필터취수정이 단일필터 취수정에 비해 68.9% 높은 것으로 분석되었다. 또한, 시험결과를 토대로 취수량이 50% 이하로 저감되는 시점을 유추해 보면 단일필터의 경우 약 1.35일의 시간이 경과하는 것으로 분석되었으며, 이중필터의 경우 38.66일 소요되어 장기적인 안정성 면에서 이중필터를 설치하는 것이 매우 유리한 것으로 평가되었다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.342-348
• /
• 1999

본 논문에서는 간단한 제어회로와 반브릿지 PWM 인버터로 구성된 저가의 단상능동전력필터에 대해 기술하고 있다. 이 능동전력필터의 성능을 확인하기 위하여 EMTP 프로그램에 의한 시뮬레이션을 실시하고 프로토타입을 제작하여 실험을 실시하였는데, 그 결과 제안하는 능동전력필터는 단상비선형부하가 발생하는 고조파를 제거하는데 우수한 성능을 갖고 있음을 확인할 수 있었다. 제안된 시스템은 반브릿지 인버터와 단일 전류센서를 사용한 간단한 제어회로로 구성되었기 때문에, 하드웨어 비용이 저렴하고 프러그인 타입으로 제작 가능한 장점을 갖는다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.388-390
• /
• 2006

This paper presents a hybrid SoC design for phase detection of single tone signal. The designed hybrid SoC is composed of three functional blocks, i.e., an analog to digital converter module, a phase detection module and a controller module. A design of the controller module is based on a 16-bit RISC architecture. An I/O interface and an LCD control interface for transmission and display of phase measurement values are included in the design of the controller module. A design of the phase detector is based on a recursive sliding-DFT. The recursive architecture effectively reduces the gate numbers required in the implementation of the module. The ADC module includes a single-bit second-order sigma-delta modulator and a digital decimation filter. The decimation filter is designed to give 98dB of SNR for the ADC. The effective resolution of the ADC is enhanced to 98dB of SNR by the incorporation of a pre FIR filter, a 2-stage cascaded integrator- comb(CIC) filter and a 30-tab FIR filter in the decimation. The hybrid SoC is verified in FPGA and implemented in 0.35 CMOS Technology.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.27-33
• /
• 2018

We report the physical implementation of a tunable photonic microwave delay line filter based on injection locking of a single Fabry-Perot laser diode (FP-LD) to a reflective semiconductor optical amplifier (RSOA). The laser generates equally spaced multiple wavelengths and a single tapped-delay line can be obtained with a dispersive single mode fiber. The filter frequency response depends on the wavelength spacing and can be tuned by the temperature of the FP-LD varying lasing wavelength. For amplitude control of the wavelengths, we use gain saturation of the RSOA and the offset between the peak wavelengths of the FP-LD and the RSOA to decrease the amplitude difference in the wavelengths. From the temperature change of total $15^{\circ}C$, the filter, consisting of four flat wavelengths and two wavelengths with slightly lower amplitudes on both sides, has shown tunability of about 390 MHz.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.339-344
• /
• 2017

본 논문에서는 Early-late detector, Duty-rate modulator, 그리고 LSI(Lock Status Indicator)를 사용하여 작은 크기와 빠른 위상고정 시간을 갖는 위상고정루프를 제안하였다. 제안된 위상고정루프는 작은 용량을 가진 하나의 커패시터를 사용하게 됨으로써 칩의 크기를 결정하는 루프필터의 크기가 작아지게 되어 크기를 최소화 하였다. 기존의 전하펌프와 달리 2개의 전하펌프를 사용하여 하나의 커패시터를 사용하더라도 2차 루프필터를 사용 한 것과 같은 전압파형을 만들어 줌으로써 위상을 고정시킬 수 있다. 2개의 전하펌프는 UP, DN신호 위상의 빠르기를 감지해주는 Early-late detector와 일정한 비율의 파형을 만들어주는 Duty-rate modulator에 의해 제어된다. LSI회로를 사용함으로써 빠른 위상고정시간을 얻을 수 있다. 제안된 위상고정루프는 1.8V $0.18{\mu}m$ CMOS 공정을 사용하여 설계하였고, Hspice 시뮬레이션을 통해 회로의 동작을 검증하였다.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1409-1420
• /
• 2015

In this paper, an algorithm using two bi-quad filters to suppress the wide-band resonance for PMSM servo systems is proposed. This algorithm is based on the double bi-quad filters structure, so it is named, "double bi-quad filter." The conventional single bi-quad filter method cannot suppress unexpected mechanical terms, which may lead to oscillations on the load side. A double bi-quad filter structure, which can cancel the effects of compliant coupling and suppress wide-band resonance, is realized by inserting a virtual filter after the motor speed output. In practical implementation, the proposed control structure is composed of two bi-quad filters on both the forward and feedback paths of the speed control loop. Both of them collectively complete the wide-band resonance suppression, and the filter on the feedback path can solve the oscillation on the load side. Meanwhile, with this approach, in certain cases, the servo system can be more robust than with the single bi-quad filter method. A step by step design procedure is provided for the proposed algorithm. Finally, its advantages are verified by theoretical analysis and experimental results.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.8-15
• /
• 2012

In this paper, we investigated possible optical parameters causing deviation of experimentally observed output spectra from theoretically predicted results in a high-order fiber comb filter based on a polarization-diversity loop configuration. They include wavelength dependency of half-wave plates (HWPs) inserted in the filter for wavelength switching and the modal birefringence of single-mode fibers (SMFs) with which optical components comprising the filter are connected. In order to consider the effect of the modal birefringence of the SMF on a filter performance, it is modeled as a low birefringence fiber with an arbitrary orientation angle and birefringence. It is found from the simulation results that the modal birefringence of SMFs strongly affects the spectral characteristics of the filter and decreases the extinction ratio of the filter, compared with the wavelength dependency of HWPs. In particular, it is also confirmed that the spectral deviation and asymmetric distortions of side-lobes in narrow band transmission spectra result mainly from the modal birefringence of SMFs.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권1호
• /
• pp.1-9
• /
• 2016

Range-based wireless localization system must measure accurate range between a mobile node (MN) and reference nodes. However, non-line-of-sight (NLOS) error caused by the spatial structures disturbs the localization system obtaining the accurate range measurements. Localization methods using the range measurements including NLOS error yield large localization error. But filter-based localization methods can provide comparatively accurate location solution. Motivated by the accuracy of the filter-based localization method, a filter residual-based NLOS error estimation method is presented in this paper. Range measurement-based residual contains NLOS error. By considering this factor with NLOS error properties, NLOS error is mitigated. Also a process noise covariance matrix tuning method is presented to reduce the time-delay estimation error caused by the single dynamic model-based filter when the speed or moving direction of a MN changes, that is the used dynamic model is not fit the current dynamic of a MN. The presented methods are evaluated by simulation allowing direct comparison between different localization methods. The simulation results show that the presented filter is more accurate than the iterative least squares- and extended Kalman filter-based localization methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
• /
• pp.132-135
• /
• 2005

A design for the input filter and the output filter of a single-phase uninterruptible power supply (UPS) system is proposed. A filter design example is presented. And also, this dissertation describes a reduction of the DC voltage ripple of a single-phase UPS. The input power of proposed UPS fluctuates with twice frequency of the utility source, which causes DC voltage fluctuation. The reduction of the DC voltage fluctuation requires a large DC link capacitor. The proposed method uses a LC series resonant filter paralleled with a conventional smoothing capacitor. The effectiveness of the proposed method was confirmed by simulation results.