• 전기화학회지
• /
• 제8권1호
• /
• pp.6-11
• /
• 2005

직접보로하이드라이드 연료전지는(direct borohydrides fuel cell. DBFC) 직접메탄을 연료전지가 갖는 메탄을 크로스오버(crossover)문제를 해결할 수 있어서, 휴대용 및 이동용 전원으로 활용하기 위하여 새롭게 대두되고있는 연료전지이다. 본 논문에서는 직접보로하이드라이드 연료전지의 전극제조 공정 확립을 위하여 여러 가지의 연료극 및 공기극 촉매를 선정하고 열가압법 (hot pressing)으로 전극을 제조하여 이에 대한 성능 특성을 고찰하였다. 공기극 촉매로는 Pt/C와 Pt black을 사용하였고, 연료극 촉매로는 Pt/C. Pt black, Au/C, $AB_5$ alloy를 사용하였다 제조된 전극 촉매는 XRD, SEM, EDS 등을 통한 특성 분석과 단위전지 운전을 통하여 I-V특성 분석이 이루어졌다. 다양한 촉매 조합을 통하여 촉매별 단전지 테스트를 한 결과 공기극 및 연료극 촉매를 Pt/C로 했을 때 가장 높은 성능인 366mW/mg을 얻을 수 있었다.

• 한국지구과학회지
• /
• 제26권8호
• /
• pp.836-843
• /
• 2005

서해 배타적경제수역내 해사채취구역에서 해저지형 변화를 규명하기 위하여 2회에 걸쳐 단일빔음향측심기를 이용한 측심자료를 획득하였다. 교차점 분석에 의한 측심자료의 정확도는 IHO 표준의 2등급에 해당하였다. 지형도는 폭 300 m, 깊이 10 m의 구덩이 형태를 나타내었으며, 이러한 지형의 변화 과정이 두 지형도 수심차의 분포에서 표현되었다. 그러나 해사채취량을 정량화하기 위해서는 더욱 정확하고 정밀한 자료가 요구된다. 이러한 지형변화는 퇴적환경 및 저서생태 환경에 영향을 미칠 수 있으므로 한정된 모래자원을 관리하고 지속가능한 개발을 위해서는 과학적인 조사자료에 근거한 환경영향평가가 요구된다.

• Clinical and Experimental Emergency Medicine
• /
• 제3권3호
• /
• pp.148-157
• /
• 2016

Objective Our aim was to compare the compression quality, exercise intensity, and energy expenditure in 5-minute single-rescuer cardiopulmonary resuscitation (CPR) using 15:1 or 30:2 compression-to-ventilation (C:V) ratios or chest compression only (CCO). Methods This was a randomized, crossover manikin study. Medical students were randomized to perform either type of CPR and do the others with intervals of at least 1 day. We measured compression quality, ratings of perceived exertion (RPE) score, heart rate, maximal oxygen uptake, and energy expenditure during CPR. Results Forty-seven students were recruited. Mean compression rates did not differ between the 3 groups. However, the mean percentage of adequate compressions in the CCO group was significantly lower than that of the 15:1 or 30:2 group ($31.2{\pm}30.3%$ vs. $55.1{\pm}37.5%$ vs. $54.0{\pm}36.9%$, respectively; P<0.001) and the difference occurred within the first minute. The RPE score in each minute and heart rate change in the CCO group was significantly higher than those of the C:V ratio groups. There was no significant difference in maximal oxygen uptake between the 3 groups. Energy expenditure in the CCO group was relatively lower than that of the 2 C:V ratio groups. Conclusion CPR using a 15:1 C:V ratio may provide a compression quality and exercise intensity comparable to those obtained using a 30:2 C:V ratio. An earlier decrease in compression quality and increase in RPE and heart rate could be produced by CCO CPR compared with 15:1 or 30:2 C:V ratios with relatively lower oxygen uptake and energy expenditure.

• Journal of Korean Neurosurgical Society
• /
• 제64권1호
• /
• pp.60-68
• /
• 2021

Objective : Until recently, the transfemoral approach (TFA) was used as the primary method of arterial approach in acute ischemic stroke (AIS). However, TFA resulted in longer reperfusion times and worse outcomes in the mechanical thrombectomy (MT) of patients with complex aortic arches and significant carotid tortuosity. We found that the transradial approach (TRA) is a more favorable alternative approach for MT in such cases. Methods : We performed a retrospective review of our institutional database to identify 202 patients who underwent MT for AIS between February 2015 and December 2019. Patient characteristics, cause of TFA failure, procedure time, intra-procedural complications, and outcomes were recorded. Results : Eleven (5.4%) of 202 patients, who underwent MT for AIS, crossed over to TRA for recanalization, and eight (72%) of 11 achieved successful recanalization (≥modified Treatment in Cerebral Infarction 2b). The mean age (mean±standard deviation [median]) was 82.3±6.6 (76) years, and five of the 11 patients were male. The last seen normal to puncture time was 467.9±264.72 (264) minutes; baseline National Institutes of Health Stroke Scale score was 28.9±14.5 (16). Six (55%) of the 11 patients had right vertebrobasilar occlusions, and the remaining five (45%) had anterior circulation occlusive disease. The time from groin puncture to final recanalization time (overall procedural time) was 78.0±20.1 (62) minutes. The mean crossover time from TFA to TRA was 45.2±10.5 (41) minutes. The mean time from radial puncture to final recanalization was 33.8±10.5 (28) minutes. Distal thrombus migration events in previously unaffected territories occurred in 3/8 patients (37%). At 90 days, three patients (28%) had a favorable clinical outcome. Conclusion : Although rare, failure of TFA has been known to occur during MT for AIS. Our results demonstrate that TRA may be an alternative option for AIS intervention for select patients with subsequent timely revascularization. However, the incidence of distal thrombus migration was high, and the first puncture to reperfusion time was prolonged because of the time taken for the crossover to TRA after failure of TFA. This study provides some evidence that the TRA may be a viable alternative option to the TFA for MT of AIS.

• 한국응급구조학회지
• /
• 제25권1호
• /
• pp.23-36
• /
• 2021

Purpose: The purpose of this study was to determine how the use of level D personal protective equipment (PPE) and cardiopulmonary resuscitation (CPR) feedback equipment affects chest compression (CC). Furthermore, this study provides basic data for developing Korean CPR guidelines that can be applied to patients with suspected or confirmed COVID-19. Methods: This randomized, single-blinded, crossover simulation trial included 26 student paramedics who performed 2-minute chest compressions using three different methods: Method A involved performing traditional CC for two minutes without donning level D PPE, Method B involved performing CC while donning level D PPE, and Method C involved performing CC with a CPR feedback device while donning level D PPE. Results: The use of a CPR feedback device during the 2-minute CC increased the exercise intensity of the subjects, but donning level D PPE didn't affect the quality of CC and the exercise intensity. The results of methods A and B showed changes in the quality of compression 80 seconds after the start of CC. No significant changes occurred in 2-minute CC when using the CPR feedback device. Conclusion: Using a CPR feedback device could prevent deterioration in the quality of CC while donning level D PPE.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권6호
• /
• pp.795-801
• /
• 2005

Eighteen Suffolk wether lambs (BW = 24 kg) were chronically exposed to temperatures of cold (2$^{\circ}C$) or warm (22$^{\circ}C$). The experimental design consisted of a 2${\times}$3 factorial with a single crossover of environment treatment. The sheep were closely shorn and were housed in individual metabolic crates in controlled environment rooms. Sheep consumed pelleted diets ad libitum, which consisted of mainly barley grain and brome grass, and diets contained 7, 11 or 14% crude protein (CP). Animals were catheterized via one jugular vein with a PVC catheter and received a single injection of 60-65 Ci of $^{14}$C]urea. Plasma urea-N (PUN), urinary urea (UU), and carbon specific radioactivity were measured. Urea metabolism was not affected by environment. Percent urea recycling and urea space clearance were highest (p<0.05) on the low nitrogen diet. Urea pool was increased (p<0.10) for the 14% CP diet. Both UU and PUN concentration were positively related (p<0.01) with diet CP content. Therefore, dietary CP content significantly influenced urea metabolism, however, cold exposure did not alter those parameters.

• Journal of applied mathematics & informatics
• /
• 제19권1_2호
• /
• pp.397-414
• /
• 2005

In the existing literature, most of the purchasing models were developed only for retailers problem ignoring the constraint of storage capacity of retailers shop/showroom. In this paper, we have developed a deterministic model of wholesaler-retailers' problem of single product. The storage capacity of wholesaler's warehouse/showroom and retailers' showroom/shop are assumed to be finite. The items are transported from wholesaler's warehouse to retailers' Own Warehouse (OW) in a lot. The customer's demand is assumed to be displayed inventory level dependent. Demands are met from OW and that spaces of OW will immediately be filled by shifting the same amount from the Rented Warehouse (RW) till the RW is empty. The time duration between selling from OW and filling up its space by new ones from RW is negligible. According to relative size of the retailers' existing (own) warehouse capacity and the demand factors, different scenarios are identified. Our objectives are to optimize the cost functions of wholesaler and two retailers separately. To solve this problem, a real coded Genetic Algorithm (GA) with roulette wheel selection/reproduction, whole arithmetic crossover and non-uniform mutation is developed. Finally a numerical example is presented to illustrate the results for different scenarios. To compare the results of GA, Generalised Reduced Gradient Method has been used for the problem. Also, a sensitivity analysis has been performed to study the variations of the optimal average cost with respect to the different parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.923-928
• /
• 1993

Genetic algorithms are powerful optimization methods based on the mechanism of natural genetics and natural selection. Genetic algorithms reduce chance of searching local optima unlike most conventional search algorithms and especially show good performances in complex nonlinear optimization problems because they do not require any information except objective function value. This paper presents a new model based on sexual reproduction in nature. In the proposed Sexual Reproduction model(SR model), individuals consist of the diploid of chromosomes, which are artificially coded as binary string in computer program. The meiosis is modeled to produce the sexual cell(gamete). In the artificial meiosis, crossover between homologous chromosomes plays an essential role for exchanging genetic informations. We apply proposed SR model to optimization of the design parameters of Single-sided Linear Induction Motor(SLIM). Sequential Unconstrained Minimization Technique(SUMT) is used to transform the nonlinear optimization problem with many constraints of SLIM to a simple unconstrained problem, We perform optimal design of SLIM available to FA conveyer systems and discuss its results.

• The Journal of Korean Physical Therapy
• /
• 제31권5호
• /
• pp.292-297
• /
• 2019

Purpose: This study examined the effects of backward walking training with task orientation on the functional walking ability of children with cerebral palsy. Methods: This study was a single-blinded, randomized controlled trial with a crossover design conducted at a single rehabilitation facility with cross-over to the other intervention arm following a two-week break. For a total of 12 children with spastic hemiplegia cerebral palsy, the forward walking training group (n=6) underwent training three times a week for three weeks, 40 minutes a day, and the backward walking training group (n=6) was also trained under the same conditions. To identify the functional walking ability, variables, such as the walking speed, stride length, and step length, were measured using a walk analyzer (OptoGait, Microgate S.r.l, Italy). Results: Both groups showed significant increases in walking speed, stride length, and step length (p<0.01). The backward walking group showed more significant improvement in the walking speed from pre- to post-test (p<0.05). The gait characteristics were similar in the two groups (stride length and step length) but the walking speed in the backward walking group showed a mean difference between the positive effects higher than the forward walking group. Conclusion: Task-oriented backward walking training, which was conducted on the ground, may be a more effective treatment approach for improving the walking functions of spastic hemiplegia children than forward walk training.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.187-194
• /
• 1995

Traditional genetic algorithms(GA) have mostly used binary code for representing design variable. The binary code GA has many difficulties to solve optimization problems with continuous design variables because of its targe computer core memory size, inefficiency of its computing time, and its bad performance on local search. In this paper, a real code GA is proposed for dealing with the above problems. So, new crossover and mutation processes of read code GA are developed to use continuous design variables directly. The results of real code GA are compared with those of binary code GA for several single and multiple objective optimization problems. As results of comparisons, it is found that the performance of the real code GA is better than that of the binary code GA, and concluded that the rent code GA developed here can be used for the general optimization problem.