• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.102-109
• /
• 1998

This study was conducted to find out the growth characteristic of mixed-seeding in the grasses for slope revegetation measures. Seeding treatment with six combination types of five grasses used for this experiment such as orchardgrass(Dactylis glomerata 'Potomac'), perennial ryegrass(Lolium perenne 'Manhattan'), tall fescue(Festuca arundinacea 'Jaguar'), kentucky bluegrass(Poa pratensis 'Majestic') and weeping lovegrass(Eragrostis curvula). The growth of orchardgrass, perennial ryegrass and tall fescue were good on mixed-seeding condition in case of number of individuals, heights and coverages at this experiment. These plants will useful for revegetation measures mixed-seeding, but weeping love grass and kentucky bluegrass did not show a desirable growth in mixed-seeding condition, and these plant prefered mixed seeding to single seeding. Regeneration percents of orchardgrass, perennial ryegrass and tall fescue were higher than that of weeping love grass and kentucky bluegrass, and coverage kept on good condition through one year after seeding, therefore, these plants will effective for initial stage revegetation measures.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1255-1257
• /
• 2003

This study proposes a single-channel satellite remote sensing algorithm for retrieving aerosol optical thickness over global ocean using FY-1C/1D data. An efficient lookup table (LUT)method is adopted in this algorithm to generate apparent reflectance in channel 1 and channel 2 of FY-1C/1D over ocean. The algorithm scale the apparent reflectance in cloud-free conditions to aerosol optical thickness using a state-of-art radiative transfer model 6S with input of the relative spectral response of channel 1 and 2 of FY-1C/1D. Monthly mean composite maps of the aerosol optical thickness have been obtained from FY-1C/1D global area coverage data between 2001 and 2003. Aerosol optical thickness maps can show the major aerosol source which are located off the west coast of northern and southern Africa, Arabian Sea and India Ocean. These result is very similar to other satellite sensors such as AVHRR and MODIS in the location area of heavy aerosol optical thickness over global ocean. The algorithm have been used to FY-1D operational performance and it is the first operational aerosol remote sensing product in China.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.156-156
• /
• 2018

The subbasin spatial scale can affect a hydrological simulation result. The objective of this study was to investigate an appropriate subbasin spatial scale for reproducing the different flow phases with the Soil and Water Assessment Tool (SWAT). Moreover, this study addressed the total hydrologic model uncertainty using the Generalized Likelihood Uncertainty Estimation (GLUE) method. The hydrologic modelling uncertainty analysis revealed that the courser subbasin spatial scale provided a relatively better coverage of most of the observations by the 95PPU. On the other hand, the finer subbasin spatial scale produced the best single simulation output closer to the observation. Moreover, most of the observed high flows were enveloped by the 95PPU while this did not happen for the low flows. The overall average performance improvement through an appropriate subbasin spatial scale for reproducing the different flow phases in the Yongdam and Gilgelabay watersheds were found to be 36% and 53%, respectively. It is, therefore, a worth that to put more effort in reproducing the different flow phases by investigating an appropriate subbasin spatial scale to improve our understanding about the frequency and magnitude of the different flow phases.

• Archives of Plastic Surgery
• /
• 제46권3호
• /
• pp.277-281
• /
• 2019

Recto-vaginal fistulas are difficult to treat due to their high recurrence rate. Currently, no single surgical intervention is universally regarded as the best treatment option for recto-vaginal fistulas. We present a case of recurrent recto-vaginal fistula surgically treated with a gracilis pull-through flap. The surgical goals in this patient were complete excision of the recto-vaginal fistula and introduction of fresh, vascularized muscle to seal the fistula. A defunctioning colostomy was performed 1 month prior to the present procedure. The gracilis muscle and tendon were mobilized, pulled through the freshened recto-vaginal fistula, passed through the anus, and anchored externally. Excess muscle and tendon were trimmed 1 week after the procedure. Follow-up at 4 weeks demonstrated complete mucosal coverage over an intact gracilis muscle, and no leakage. At 8 weeks post-procedure, the patient resumed sexual intercourse with no dyspareunia. At 6 months post-procedure, her stoma was closed. The patient reported transient fecal staining of her vagina after stoma reversal, which resolved with conservative treatment. The fistula had not recurred at 20 months post-procedure. The gracilis pull-through flap is a reliable technique for a scarred vagina with an attenuated recto-vaginal septum. It can function as a well-vascularized tissue plug to promote healing.

• Nuclear Engineering and Technology
• /
• 제54권10호
• /
• pp.3816-3823
• /
• 2022

This work analyzed the dosimetric difference between the intensity modulated radiotherapy (IMRT), partial/single/double-arc volumetric modulated arc therapy (PA/SA/DA-VMAT) techniques in treatment planning for treating more than one target of lung cancer at different isocenters. IMRT and VMAT plans at different isocenters were created systematically using a Harold heterogeneous lung phantom. The conformity index (CI), homogeneity index (HI), gradient index (GI), dose-volume histogram and mean and maximum dose of the PTV were calculated and analyzed. Furthermore, the dose-volume histogram and mean and maximum doses of the OARs such as right lung, contralateral lung and non GTV were determined from the plans. The IMRT plans showed the superior target dose coverage, higher mean and maximum values than other VMAT techniques. PA-VMAT technique shows more lung sparing and DA-VMAT increases the V_5/10/20 values of contralateral lung than other VMAT and IMRT techniques. The IMRT technique achieves highly conformal dose distribution to the target than other VMAT techniques. Comparing to the IMRT plans, the higher V_5/10/20 and mean lung dose were observed in the contralateral lung in the DA-VMAT.

• 센서학회지
• /
• 제31권6호
• /
• pp.376-382
• /
• 2022

A triboelectric nanogenerator (TENG) can obtain electrical output due to the reciprocal motion between two objects (i.e., rubbing), in which repetitive contact is made. High reliability, stable output, and high reproducibility are important aspects of the electrical output obtained through a TENG as a sensor or generator, thus enabling its meaningful use. Therefore, many researchers fabricated TENGs into individual parts in the form of one module type to obtain high reproducibility and reliability. Since a TENG manufactured as a module type operates as a single device, it is possible to collect kinetic energy and convert it into electrical energy through the interaction between internally configured elements without the need for a separate structure. In addition, it is relatively easy to apply the size to the body, machine tools, and natural environment by simply adjusting the size suitable for use and surrounding environmental conditions. In this paper, the application cases of module-type TENGs are divided into four areas, and the research progress of module-type TENGs in each area is extensively reviewed.

• 응용통계연구
• /
• 제35권3호
• /
• pp.347-356
• /
• 2022

본 논문에서는 금융 시계열 비대칭 변동성을 모형화하기 위해서 다중 임계점을 가진 비대칭-ARCH 점화식(A-ARCH(1))을 제안하고 있다. 특히 임계점이 두 개인 간단한 모형에 초점을 맞추어 설명하고 있으며 미국 S&P500 자료 분석을 통해 예시하였다. 다양한 A-ARCH(1) 모형의 예측력 비교를 위해 모수적-붓스트랩을 활용하여 예측오차의 평가 및 예측구간의 정확도를 설명하였다.

• Journal of Yeungnam Medical Science
• /
• 제40권3호
• /
• pp.302-307
• /
• 2023

With recent developments in digital dentistry, research on techniques and materials for three-dimensional (3D) printing is actively underway. We report the clinical applications and outcomes of 3D printing of temporary crowns fabricated with polylactic acid (PLA) using a fused deposition modeling (FDM) printer. Five participants were recruited from among patients scheduled to be treated with a single full-coverage crown at a dental clinic in a university medical center from June to August 2022. We used 3D-printed crowns fabricated with PLA using an FDM printer as temporary crowns and were assessed for discomfort, fracture, and dislodging. The 3D-printed temporary crowns were maintained without fracture, dislodging, or discomfort until the permanent prosthesis was ready. The average time required for printing the temporary crowns was approximately 7 minutes. The 3D printing of temporary crowns with PLA using an FDM printer is a convenient process for dentists. However, these crowns have some limitations, such as rough surface texture and translucency; therefore, the 3D printing process should be improved to produce better prostheses.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.14-17
• /
• 2007

The slot-die coating & calcination process was adopted to fabricate the long YBCO precursor films on the buffered metal tape for the $2^{nd}$ generation coated conductors. To obtain the smooth and crack-free surface of long YBCO precursor films, the parameters of slot-die coating and the process variables of calcination step must be optimized simultaneously in reel-to-reel method. Among the parameter of slot-die coating process, the viscosities of the precursor solution was controlled from 60cP to 200cP to obtain the thicker films from on single coating. The slot-die gap, the injection rate of precursor solution, the moving speed of buffered metal tape etc. are controlled lot the full coverage and smooth surface of YBCO precursor films. The slot-die coated films are moved through the tube furnace with predetermined heating profiles in humid oxygen ambient The YBCO precursor films was identifed with $Y_2O_3,\;BaF_2$, and CuO phase by XRD and consisted of fine grains of about 20nm size observed by FE-SEM. The YBCO films show the critical current density over $MA/cm^2$ using the precursor films formed by the continuous slot-die coating & calcination process.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.1260-1263
• /
• 2011

최근 차세대 시퀀싱 (Next Generation Sequencing, NGS) 기술이 발전하면서 DNA, RNA 등의 시퀀싱 데이터를 이용한 유전체 분석 방식에 관한 연구가 활발히 이루어지고 있다. 차세대 시퀀싱 데이터를 이용한 유전체 분석 방식은 마이크로어레이 혹은 EST/cDNA 데이터를 이용한 기존의 분석 방식에 비하여 비용이 적게 들고 정확한 결과를 얻을 수 있다는 장점이 있다. 그러나 이 들 DNA, RNA 시퀀싱 데이터는 각 시퀀스의 길이가 짧고 전체 용량은 매우 커서 이 들 데이터로부터 정확한 분석 결과를 추출하는 데에 많은 어려움이 있다. 본 연구에서는 클라우드 컴퓨팅 기술을 기반으로 하여 대용량의 RNA 시퀀싱 데이터를 고속으로 처리하는 병렬 SNP 추출 알고리즘을 제안한다. 전체 게놈 데이터 중 유전자 영역만을 high coverage로 시퀀싱하여 얻어지는 RNA 시퀀싱 데이터는 유전자 변이 추출을 목적으로 분석되며, SNP(Single Nucleotide Polymorphism)와 같은 유전자 변이는 질병의 원인 규명 및 치료법 개발에 직접 이용된다. 제안된 알고리즘은 동시에 실행되는 다수의 Map/Reduce 함수에 의해서 대규모 RNA 시퀀스를 병렬로 처리하며, 레퍼런스 시퀀스에 매핑된 각 염기의 출현 빈도와 품질점수를 이용하여 SNP를 추출한다. 또한 이 들 SNP 추출 결과에 대한 시각적 분석 도구를 제공하여 SNP 추출 과정 및 근거를 시각적으로 확인/검증할 수 있도록 지원한다.