• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1088-1095
• /
• 2019

The information and communication technology that is being developed recently has been greatly influencing the automobile market. In recent years, devices equipped with IT technology have been installed for the safety and convenience of the driver. However, it has the advantage of increased convenience as well as the disadvantage of increasing traffic accidents due to driver's distraction. In order to prevent such accidents, it is necessary to develop safety systems of various types and ways. In this paper implements a platform that can recognize LDWS and FCWS and PDWS by using a single camera without using radar sensor and camera fusion and stereo camera method using two or more sensors, and proposes to study multi-function driving safety platform using a single camera by analyzing recognition rate evaluation and validity on a vehicle.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.569-577
• /
• 2014

From the year 2009, 3D Stereoscopic movies and TV have been spotlighted after the huge success of a movie called "AVATAR". Moreover, most of 3D movies & contents are created by mixing real-life shots & virtual animated pictures, such as "Robocop 3", "Transformer 4" as shown in 2014. However, the stereoscopic 3D video film shooting with a traditional stereoscopic rig camera system, takes much more time to set the rig system and adjust the system setting for proper film making which necessarily resulting in bigger cost. In fact, these problems have depreciated the success of Avatar as decreasing demand for 3D stereoscopic video shooting. In this paper, inherent problems of traditional stereoscopic rig camera system are analyzed, and as a solution for the problems, a novel implementations of single-lens optical stereoscopic 3D camera system is suggested. The new system can be implemented to a technology for separating two lights when even those lights passing through in the same optical axis. The system has advantages of adjusting the setting and taking video compared with traditional stereoscopic 3D rig systems. Furthermore, this system can acquire comfortable 3D stereoscopic video because of the good characteristics of geometrical errors. This paper will be discussed the single-lens stereoscopic 3D camera system using rolling shutters, it will be tested geometrical errors of this system. Lastly, other types of single lens stereoscopic 3D camera system are discussed to develop the promising future of this system.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.90-95
• /
• 2000

This paper presents the vergence control of a parallel stereo camera and its application to underwater stereo camera to enhance the working efficiency of underwater vehicles that equips with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get a clear stereo vision with the camera for all the range of objects in air and in water, especially in short range objects. The control system of the camera is so simple that we are able to realize a small stereo camera system and to apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain the three-dimensional images and the distance information in real-time.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.1
• /
• pp.79-84
• /
• 2001

This paper present the control of the image disparity of a parallel stereo camera and its application to an underwater stereo camera to enhance the working efficiency of underwater vehicles that are equiped with manipulators in seabed operation. The stereo camera consists of two parallel lenses mounted on a lateral moving base and two CCD cameras mounted on a longitudinal moving base, which is embedded in a small pressure canister for underwater application. Because the lateral shift is related to the backward shift with a nonlinear relation, only one control input is needed to control the vergence and focus of the camera with a special driving device. We can get clear stereo vision with the camera for all the range of objects in air and in water, especially in short range object. The control system of the camera is so simple that we are able to realize a small stereo camera system and apply it to a stereo vision system for underwater vehicles. This paper also shows how to acquire the distance information of an underwater object with this stereo camera. Whenever we focus on an underwater object with the camera, we can obtain three-dimensional images and distance information in real-time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.192-197
• /
• 2009

In this paper, we proposed the obstacle avoidance system using a single camera image and LM(Levenberg-Marquart) neural network fuzzy controller. According to a robot technology adapt to various fields of industry and public, the robot has to move using self-navigation and obstacle avoidance algorithms. When the robot moves to target point, obstacle avoidance is must-have technology. So in this paper, we present the algorithm that avoidance method based on fuzzy controller by sensing data and image information from a camera and using the LM neural network to minimize the moving error. And then to verify the system performance of the simulation test.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.4
• /
• pp.70-77
• /
• 2020

In this study, we estimate the vehicle speed by analyzing the acoustic data recorded in a single microphone of a surveillance camera. The frequency analysis of the acoustic data corrects the Doppler effect, which is a characteristic of the moving sound source, and reflects the geometric relationship according to the location of the sound source and the microphone on the two-dimensional plane. The acoustic data is selected from the horn sound that is mainly observed in an urgent situation among various sound sources that may occur in a traffic accident, and the characteristics of the monotone source are considered. We verified the reliability of the proposed method by time domain acoustic analysis and actual vehicle evaluation. This method is effective and can be used for traffic accident analysis in the blind spot of the camera using a single microphone built into the existing surveillance camera.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.3
• /
• pp.297-304
• /
• 1997

In stereo vision, camera modeling is very important because the accuracy of the three dimensional locations depends considerably on it. In the existing stereo camera models, two camera planes are located in the same plane or on the optical axis. These camera models cannot be used in the active vision system where it is necessary to obtain two stereo images simultaneously. In this paper, we propose four kinds of stereo camera models for active stereo vision system where focal lengths of the two cameras are different and each camera is able to rotate independently. A single closed form solution is obtained for all models. The influence of the stereo camera model to the field of view, occlusion, and search area used for matching is shown in this paper. And errors due to inaccurate focal length are analyzed and simulation results are shown. It is expected that the three dimensional locations of objects are determined in real time by applying proposed stereo camera models to the active stereo vision system, such as a mobile robot.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.295-302
• /
• 2014

Essential to the establishment of such 3D spatial information are the laser scanning technology to obtain high-precision 3D point group data and the photography-metric camera to obtain high-resolution multispectral image information. The photography-metric camera, however, lacks in usability for its broad scope of utilization due to the high purchase price, difficult purchase channel, and low applicability. This study thus set out to investigate a technique to establish multi-dimensional ortho-image data with a single lens reflex digital camera of high speed and easy accessibility for general users. That is, the study remodeled a single lens reflex digital camera and calibrated the remodeled camera to establish 3D multispectral image information, which is the essential data of 3D spatial information. Multi-dimensional ortho-image data were collected by surveying the reference points for stereo photos, taking multispectral shots of the objects, and converting them into ortho-images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.757-762
• /
• 2012

In general, an ordinary CCTV camera has equipped with 24 frames per second. This camera is not capable of capturing an image of bullet trace which has speed about 1km per second. In spite of these difficulties, by means of the stereographical projection, a long distance trace is able to be contained in one image. Currently, to capture a series of image of an object with high speed, it is usual to use one of the complicated camera with high shutter speed or computerized devices with capability of controlling shutter timing with slightly different capture time. This paper proposed a monitoring tracer bullet single camera system equipped convex mirror trying to see whether or not a normal set of camera and convex mirror is capable of shooting on target located in as far as 250m.

• Journal of Multimedia Information System
• /
• v.1 no.1
• /
• pp.1-10
• /
• 2014

In this paper, we propose a new view synthesis technique for coding of multi-view color and depth data in arbitrary camera arrangements. We treat each camera position as a 3-D point in world coordinates and build clusters of those vertices. Color and depth data within a cluster are gathered into one camera position using a hierarchical representation based on the concept of layered depth image (LDI). Since one camera can cover only a limited viewing range, we set multiple reference cameras so that multiple LDIs are generated to cover the whole viewing range. Therefore, we can enhance the visual quality of the reconstructed views from multiple LDIs comparing with that from a single LDI. From experimental results, the proposed scheme shows better coding performance under arbitrary camera configurations in terms of PSNR and subjective visual quality.