• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5465-5470
• /
• 2012

FPGA(Field Programmable Gate Array) devices are widely used due to their merits in circuit development time, and development cost. Among various FPGA technologies, SRAM-based FPGAs have large cell capacity so that they are attractive for complex circuit design and their reconfigurability. However, they are weak in space environment where radiation energy particles cause Single Event Upset(SEU). In this paper, we designed a controller supervising SRAM-based FPGA to protect configuration memory inside. The controller is implemented on an Anti-Fusing FPGA. Radiation test was performed on the implemented computer board and the result show that our controller provides better SEU-resilience than TMR-only system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.5
• /
• pp.339-348
• /
• 2017

Due to recent improvements in computer processing speed and image processing technology, researches are being actively carried out to combine information from a camera with existing GNSS (Global Navigation Satellite System) and dead reckoning. In this study, the mathematical model based on SPR (Single Photo Resection) is derived for image-based assistant algorithm for vehicle positioning. Simulation test is performed to analyze factors affecting SPR. In addition, GNSS/on-board vehicle sensor/image based positioning algorithm is developed by combining image-based positioning algorithm with existing positioning algorithm. The performance of the integrated algorithm is evaluated by the actual driving test and landmark's position data, which is required to perform SPR, based on simulation. The precision of the horizontal position error is 1.79m in the case of the existing positioning algorithm, and that of the integrated positioning algorithm is 0.12m at the points where SPR is performed. In future research, it is necessary to develop an optimized algorithm based on the actual landmark's position data.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.31-34
• /
• 2015

Recently, the various types of data are began to increase. In order to manage the data efficiently, a variety of cloud services are being made. However, while providing a cloud service, the problem is the cost and waste a lot of human power to manage the data that is generated and managed by the server. To solve this problem, it is build the cloud environment using a single board computer with Raspberry pi. In this paper, we used Raspberry pi as a cloud server to provide services for the users. And we construct a Total Server to manage the generated data. It can separate the processing of data and the provision of services. We ensure the efficient operation by building a cloud environment with Raspberry pi and by managing the data which generated in cloud environment with the total server.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.5
• /
• pp.352-359
• /
• 1987

The cycloconverter operating on a circulating current-free mode has many zero crossing points. If an exact zero crossing points are not detected, the three phase-unbalanced currents will flow in a motor. In this paper, the current feedback using a current reference wave is proposed to improve the problems of zero crossing detection, three phase-unbalanced voltages, currents, and torgue ripples. To prevent the saturation of the air gap flux and keep the torque constant, the constant voltage / hertz control with IR compensation is adopted. The PI-controller is designed using the linearized model of the cycloconverterinduction motor system. Alsi, Z-80A single board computer has been used to implement the proposed scheme which results in the performance improvement of cycloconterter-fed induction motor speed control system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.80-85
• /
• 2013

Recently it is becoming more common to apply vehicle electronics(Vetronics) based on information technology to improve the operability of the combat vehicles. Although the vehicle electronics system has been gradually developed, it is hard not only to design the reliable system which is a built-in multi-function but also to analyze the fault failure in the state of on-vehicle when failures occur. Therefore, It is required the data logging system like a aircraft's black box for the combat vehicles to enhance the reliability. In this paper, we developed the multi data acquisition and analysis device which is acquiring real-time data such as communication data, video data and voice data available for checking operational status of system and managing history. The performance of device has been proved on the vehicle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.156-157
• /
• 2018

의료분야에서 원격판독은 보편화되어 있다. 하지만 이러한 원격판독에 필요한 전송과 관리 시스템은 부족하다. 본 논문에서는 가정용 카메라 모듈을 구성하고 이를 통해 모바일 애플리케이션으로 영상 스트리밍 및 사진 촬영을 하여 촬영된 사진을 치과로 전송하고 원격으로 검진할 수 있는 카메라 모듈 및 애플리케이션의 영상 전송을 위한 방법론을 제시한다. 안드로이드 애플리케이션과 카메라 모듈의 스트리밍 과정에는 여러 가지 문제가 발생한다. 모듈에서의 촬영 영상과 애플리케이션의 스트리밍 영상 간의 딜레이가 존재하는 것과 스트리밍 도중에 영상이 검은 화면으로 나왔다가 다시 돌아오거나 화절 저하 현상이 일어나는 것이다. 이러한 문제점들을 개선하고 최적화 할 수 있도록 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.92.6-92
• /
• 2001

MSC is being developed to be installed on KOMPSAT(Korea Multi-Purpose Satellite-II and to provide high resolution multi-spectral. MSC consists of three main subsystems. One is EOS(Electro-Optics Subsystem), another is PMU(Payload Management Unit) and the other is PDTS(Payload Data Transmission Subsystem). There is an SBC(Single Board Computer) in the PMU to control all MSC subsystems. SBC incorporates Intel 80486 as a main processor and VxWorks as a real-time operating system. SBC software consists of four main tasks and several modules to deal with all control information for imaging and all the state of health telemetrv data, and to perform interface with another MSC units. SBC software also has to handle a lot of commands in order for MSC to perform his mission. One mission command consists of a series of related commands, which are In be executed in the designated sequence, with a specified time ...

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.257-260
• /
• 2001

Routing region modeling methods for PCB auto-routing system in Shape based type(non-grid method) used region process type and the shape located in memory as a individual element, and this element consumed small memory due to unique data size. In this paper we design PCB(Printed Circuit Board) auto-routing system using the auction algorithm method that 1) Could be reached by solving the shortest path from single original point to various destination, and 2) Shaped based type without any memory dissipation with the best speed. Also, the auto-routing system developed by Visual C++ in Window environment, and can be used in IBM Pentium computer or in various individual PC system.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.655-660
• /
• 2000

Animation technique from the PIV database is particularly emphasized to give macroscopic and quantitative description of complex flow fields. This paper shows animation construction and application example for the post-processing of PIV data. As examples, first case is a pitching airfoil immersed in tree surface water circulating tunnel. Second case is a wake of a model-ship. Third case of PIV data is a large scale surface flow field. Obtained images are processed in time sequence by PIV exclusive routines where an efficient and reliable cross correlation algorithm is included for vector identification. All. animation Jobs are implemented completely on single personal computer environment. Compressed digital images are obtained initially by Motion-JPEG board and various An files are finally obtained through graphic processes.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.2
• /
• pp.55-60
• /
• 2016

This study was developed through the secondary battery module charging/discharger possible utilization in the production process equipment circuit. The developed module is ensuring construction of efficient and productive charging and discharger through this research a limit on the yield and the price of existing single -channel charge and discharger circuit as a 5V 70A grade secondary battery Formation charge and discharger for up to 1 board 4 channels. In order to improve the sensing accuracy, through a robust differential amplifier circuit described using 16bit Analog-Digital Converter and noise was secured 16bit resolution sensing. The configuration also made demands for property Rise / Fall Time. Data Acquisition, discharge efficiency and also to fit the sink circuit temperature level for mass production.