• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.19-22
• /
• 2004

In this paper, we present a way that can implement the vector control Algorithm of induction motor and PWM signal generation on the basis of Matlab Simulink environment. The overall system model is designed by Simulink toolbox for vector control of induction motor, and then implement experiment with the DS1103 board of dSPACE. Although we are not coding the system, it is capable of doing simulation and experiment simultaneously. That is why Matlab and dSPACE board compiler can generate the '*.c' and '*.obj' files on the designed system automatically. After considering about hardware structure and driving system in Ds1103 board we verify the availability of Proposed method through in a comparison/analysis between simulation and experiment.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.82-97
• /
• 2009

In this study, a linearlized model of liquid rocket engine specifically for the gasgenerator cycle one was developed to serve as a basic control model. A commercial software Simulink was used for the modeling. Using this tool we studied the throttling characteristic of engine around its nominal mode. To obtain the effect of the throttle valve design on the engine's control characteristic, we included mathematical model of the control valve with driving motor and the pressure stabilizer which installed on the gas-generator fed line to sustain the mixture ratio of the gas-generator.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.11
• /
• pp.589-595
• /
• 2004

This paper presents a modeling and simulation of a grid-connected wind turbine generation system with respect to wind variations, starting of large induction motor and three-phase fault in the system, and investigates voltage variations of the system for disturbances. It describes the modeling of the wind turbine system including the drive train model, induction generator model, and grid-interface model on MATLAB/Simulink. The simulation results show the variation of the generator torque, the generator rotor speed, the pitch angle, terminal voltage, system voltage, fault current, and real/reactive power output, etc. Case studies demonstrate that the pitch angle control is carried out to achieve maximum power extraction for wind speed variations, starting of a large induction motor causes a voltage sag due to a large starting current, and a fault on the system influences on the output of the wind turbine generator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1917-1922
• /
• 2010

Near-Field Communication (NFC) is a short-range wireless communication technology evolved from RFID especially for the exchange of data between active and passive devices. This paper presents the mathematical models for the signal path of a NFC transceiver system and a behavioral simulation platform using MATLAB simulink. The approximated mathematical models simplify the simulation complexity of a transceiver and provide a quick evaluation. With this calculation platform, we can evaluate the system performance caused by the noise and the non-linearity of the individual blocks, and caused by system variables such as Effective Number of Bits (ENOB) of ADC and filter cutoff frequency. This platform provides us with a rapid prototyping, a reliable system design, and an efficient risk management during development of the NFC transceiver ICs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.10
• /
• pp.1816-1822
• /
• 2010

In this research TPS (Train Performance Simulation) blocks are designed using Simulink and applied to generate speed profiles for energy-efficient train operation. With a train operation mode of maximum powering, coasting, and maximum breaking, a breaking point is calculated from forward-backward running profiles. Then, GA (Genetic Algorithm) is used to solve a running time constraint, and a coasting point is produced from the searching process of GA. With the breaking point and the coasting point a speed profile is plotted. Train performance under a speed limit and gradient variations is simulated and resultant speed profiles are analyzed.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.217-221
• /
• 2002

In this research a Matlab/Simulink/RTW - based on the realtime control system was developed for an induction motor vector control. On the Simulink window, the control system is designed In the form of block diagrams, program codes are produced automatically with the RTW(Real Time Workshop), then a DSP c compiler complies the program codes.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.342-344
• /
• 2006

전동기 구동시스템의 사양 결정과 설계를 위해서는 부하의 부하토크, 관성계수, 마찰계수 등의 정보에 의한 부하 모델링이 반드시 필요하다. 전동지게차 시스템의 모델링을 위해서는 차체의 중량과, 바퀴의 제원 등 제한적인 정보를 기초로 하여 번거로운 계산과정을 거쳐야 하지만 정확한 정보를 얻기에는 어려움이 따른다. RecurDyn은 기계시스템의 모델링과 시뮬레이션을 하는 3차원 해석이 가능한 Functionbay사에서 개발한 시뮬레이션 프로그램으로서 3D의 기계적인 형상을 작성하고, 물성을 입력하면 부하토크, 등가 관성계수, 마찰계수를 출력할 수 있어 전동기구동시스템의 시뮬레이션 프로그램인 Matlab/Simulink와 결합하여 시뮬레이션을 수행 할 경우 부하 모델링 없이 전체 구동시스템의 특성 시뮬레이션이 가능하다. 본 논문에서는 영구자석 동기전동기로 구동하는 전동지게차 시스템을 대상으로 RecurDyn 프로그램의 활용을 소개하고 Matlab/Simulink를 이용한 결함 시뮬레이션의 가능성을 보고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.307-309
• /
• 2008

This study suggests a modeling of grid-connected wind turbine generation system that has induction generator, and aims to perform simulations for outputs by the variation of actual wind speed and for fault current of wind generation system by the transformer winding connection. This study is implemented by matlab&simulink. The simulation shall be performed by assuming single line to ground fault generated in the system. Generator power, generator rotor speed, generator terminal current and fault current shall be observed following the performance of simulation. The fault current change will be dealt through the simulation results for fault current of wind generation system following the grid-connected transformer winding connection and the simulation result by the transformer neutral ground method.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2589-2591
• /
• 2002

송수신기의 방식에는 직접변환 방식과 기저대역 신호와 LO(Local Oscillator)를 혼합하여 interpolation 기법을 사용하여 중간 주파수 단계까지 up conversion을 하고 두 번째 LO와 IF신호를 혼합하여 RF신호로 변환하여 송신하는 헤테로다인 방식이 존재한다. 본 논문에서는 이런 송수신기 방식 중에서 헤테로다인 방식을 적용하여 QPSK에서의 digital up /down converter를 Simulink 환경에서 설계 및 구현하였다. Up converter는 4배의 interpolation 필터와 4단짜리 cascaded integrate-comb(CIC)필터를 사용하여 입력데이터의 샘플 레이트를 클럭 레이트까지 증가시켰으며, numerically controlled oscillator (NCO)와 mixer를 사용하여 신호를 변조하였다. Down converter의 구조는 up converter와 동일하며 단지 up converter의 반대순서로 구성되어있다. 이런 모든 과정을 Simulink를 이용한 시뮬레이션과 스펙트럼 분석기를 사용하여 검증해 보았다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1022-1023
• /
• 2006

본 논문에서는 MATLAB/SIMULINK와 dSPACE DS1104보드를 이용하여 유도전동기의 간접백터제어 알고리즘을 구현하였다. 유도전동기의 간접벡터제어를 위한 전체 시스템 모델은 SIMULINK 그래픽 모델과 dSPACE DS1104 R&D Control 보드의 Real Time Interface(RTI)를 이용하여 구현한 후에 실험을 수행하였다. 벡터제어를 위해서 전동기 전류의 측정은 16kHz로 측정하였고, 측정된 전류를 이용하여 8Hz로 전류제어기, 4kHz로 속도제어기를 구현하였다. MATLAB과 dSPACE 보드의 컴파일러가 설계된 그래픽 모델의 C source 파일과 object 파일을 자동으로 생성시켜주기 때문에 추가적인 프로그램의 coding 없이 실제 시스템의 시뮬레이션과 실험을 동시에 수행할 수 있으며 원하는 제어성능을 얻을 수 있다.