• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.136-148
• /
• 1995

In this study, a model integration method is pressented as a new method for development of a parametric simulation model. This method enable us to integrate the special simulation models for each production subsystem into a large simulation model. Not only this large simulation model but also each special simulation model for each production subsytem can be used independently. Using this integration method man can reduce the development time and cost for simulation model development. To show the usefulness of this method, a simulation model for a production system with robots is developed by this model integration method. This simulation model is realized by the integration of two special simulation models, one model for a machining subsystem and the other model for a transport subsystem. The modeled production system consists of the robotic cells for machining and a transport subsystem which enable the material flow among the robotic cells. The flow of workpiece in each robotic cell is not fixed. All machines in a robotic cell are only served by robots.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.106-115
• /
• 1994

A parallel integration approach is proposed for real-time simulation of controlled mechanical systems. The proposed approach, which employs the dual-rate integration method in a parallel computing environment, is developed to deal with stiffness and high frequency characteristics of the controlled mechanical systems effectively. Numerical experiments are performed to demonstrate the effectiveness of the approach in shared memory multiprocessors, Alliant FX/8 and Alliant FX/80.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.94-94
• /
• 2000

In this paper, the performance of INS/GPS integration is analyzed. Generally the integration method is classified into two method. One is loosely coupled integration, Another is tightly coupled integration. For the simulation, the error model of Kalman fitter is defined and the result of simulation is analyzed. When the number of visible satellites is less than four, the error of tightly coupled integration is smaller than that of loosely coupled integration. To very the result of simulation, van test that use LP-81 IMU and Millen3151R GPS receiver is carried out.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.72-80
• /
• 2006

Electric Power Steering (EPS) mechanism has become widely equipped in passenger vehicle due to the increasing environmental concerns and higher fuel efficiency. This paper describes the development of concurrent simulation technique and simulation integration technique of EPS control system with a dynamic vehicle system. A full vehicle model interacting with EPS control algorithm was concurrently simulated on a single bump road condition. The dynamic responses of vehicle chassis and steering system resulting from road surface impact were evaluated and compared with proving ground experimental data. The comparisons show reasonable agreement on tie-rod load, rack displacement, steering wheel torque and tire center acceleration. This concurrent simulation capability was employed fur EPS performance evaluation and calibration as well as for vehicle handling performance integration and synthesis.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.512-517
• /
• 2007

In the previous development of the recursive thermostat chained fully flexible cell molecular dynamics simulation, implicit time integration method such as generalized leapfrog integration is used. The implicit algorithm is very much complicated and not easy to show time reversibility because it is solved by the nonlinear iterative procedure. Thus we develop simple, explicit symplectic time integration formula for the recursive thermostat chained fully flexible unit cell simulation. Uniaxial tension test is performed to verify the present explicit algorithm. We check that the present simulation satisfies the ergodic hypothesis for various values of fictitious mass and coefficient of multiple thermostat system. The proposed method should be helpful to predict mechanical and thermal behavior of nano-scale structure.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.559-567
• /
• 1987

In this paper, the real time simulation of continuous dynamic system was performed by general integration algorithms using multiprocessor. For the stable simulation, the relation between stability of integration method and integration step-size was investigated from the stability graph. As a typical illustration, the real-time digital simulation and the real-time hard-ware-in-the-loop simulation of flight control system were performed and reviewed. Moreover through the real-time simulation, the design verification and performace test of flight control system could be evaluated. The computer used for simulation is AD10, which is a very high-speed special-purpose computer designed specifically for a time-critical simulation of large and complex models of dynamic systems. The simulation validity is demonstrated by comparing hardware simulation results with software simulation results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.688-693
• /
• 2007

The INS/GPS integration system is designed by employing an adaptive filter that can estimate the measurement noise variance using the residual of the filter. To verify the efficiency of the proposed loosely-coupled INS/GPS integration system, simulation is performed by assuming that GPS information has large position errors. Simulation results show that the proposed integration system with the adaptive filter is more effective in estimating the position and attitude errors than those with the Extended Kalman Filter.

• Journal of the Korea Society for Simulation
• /
• v.9 no.4
• /
• pp.25-40
• /
• 2000

The cost of simulation modeling, the expertise required, and the pains of starting a new each time are impediments to more wide spread adoption of simulation technology. In addition, one of the most critical problems in the field of computer simulation today is the lack of published models and physical objects within the World Wide Web (WWW) allowing such distribution. From the viewpoint of WWW as distributed model repositories, it can be assumed that very many simulation models exist on the web. This paper is based on the premise that WWW is a distributed repository. Design Pattern, web-oriented technology like Java and CORBA, which are especially to cope with distributed objects, are introduced and discussed in detail for integration of simulation model. In this paper an architecture of model integration is proposed, which presents the whole procedure of model integration and how the Internet technologies are connected in. The central focus of this research is on the technical realization of integrating simulation models as distributed objects

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.91-101
• /
• 2023

Modeling and Simulation(M&S) technology has been widely used to solve constraints such as time, space, safety, and cost when we implement the same development and test environments as real warfare environments to develop, test, and evaluate weapon systems for the last several decades. The integration and test environments employed for development and test & evaluation are required to provide Live Virtual Construction(LVC) simulation environments for carrying out requirement analysis, design, integration, test and verification. Additionally, they are needed to provide computing environments which are possible to reconfigure computing resources and software components easily according to test configuration changes, and to run legacy software components independently on specific hardware and software environments. In this paper, an Integration Test and Simulation for Engagement Control(ITSEC) bed using a bare-metal virtualization mechanism is proposed to meet the above test and simulation requirements, and it is applied and implemented for an air missile defense system. The engagement simulation experiment results conducted on air and missile defense environments demonstrate that the proposed bed is a sufficiently cost-effective and feasible solution to reconfigure and expand application software and computing resources in accordance with various integration and test environments.

• Journal of the Korea Society for Simulation
• /
• v.23 no.4
• /
• pp.85-95
• /
• 2014

Simulation for product design requires a lot of causal knowledge. Hence, knowledge integration is required for obtaining a new knowledge from existing knowledge. For example, a user requests knowledge for the heating cup. However, the knowledge base only has knowledge for heating and cup, not heating cup. At his situation, knowledge integration can generate a new heating cup knowledge from existing heating and cup knowledge. Therefore, the user can obtain the knowledge for heating cup. Hence, this study aims to propose a novel knowledge integration method for product design.