• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.415-423
• /
• 2004

To investigate the long-term corrosion resistance of an uncoated weathering steel, an important outdoor constructional steel material, skyward surfaces of the weathering steel and a control steel initially exposed to rural and industrial atmospheres for 9 years were electrochemically tested in neutral artificial rain in terms of electrochemical potentials, impedances, and anodic potentiodynamic polarization curves. Their results were then discussed. A quite passive and stable rust layer to the artificial rain was well formed on the skyward surface of the weathering steel exposed to the industrial and rural atmospheres, and its corrosion rate in the artificial rain was measured to be about a low $3{{\mu}m}/y$. Continuous immersion of all the weathered surfaces in the artificial rain revealed the gradual degradation of the weathered corrosion layers on the steel, resulting in a cathodically controlled corrosion of the substrate steel by the electrochemical measurements. Alloy components of the weathering steel were found to retard the degradation of the weathered corrosion layers on the steel in the artificial rain. For better corrosion evaluation of the weathering steel, more electrochemical measurements of surfaces that have been exposed for more than 9 years to more closely simulated atmospheric waters are needed. These measurements are almost non-destructive and can provide online and in situ information on the corrosion rate, the development of corrosion and the conditions of rust layers on any interested surface and at any exposure time of the steel, so they can be effectively applicable to the corrosion evaluation of steel structures such as bridges, towers, and architectures by forming an electrochemical cell on an interested structural surface and by using a portable electrochemical instrument.

• The Korean Journal of Ecology
• /
• v.16 no.4
• /
• pp.409-416
• /
• 1993

After spraying simulated sulphuric acid rain (SSAR) to the leaves of Glycine max, Quercus aliena var. pellucida and Pinus rigida, the leachates were consecutively collected and quantitatively determined for the concentration of K and Ca. The amount of the leached ion decreased with subsequent acid treatment for all plants. But as the pH of SSAR decreased, the amount of the leached ion increased. The cumulative quantities of K leached from each species were 1.04 to 1.46 times higher at pH 4.0, 1.09 to 1.58 times higher at pH 3.5 and 1.24 to 2.03 times higher at pH 3.0 compared with pH 5. 6 treatments. The cumulative quantities of Ca leached from each species were 1.23 to 1.47 times higher at pH 4.0, 1.50 to 1.92 times higher at pH 3.5, and 2.45 to 3.30 times higher at pH 3.0 compared with pH 5.6 treatments. The Ca /K ratio in 1000 ml leachate was 1.10 to 2.91 for Q. aliena var. pellucida and 1.68 to 2.98 for P. rigida, but 0.66 to 0.91 for G, max. The Ca /K ratio in 1000 rnl leachate increased for all three species, as the pH of SSAR decreased. Foliage analysis after acid rain treatment showed leaching effect at pH 3.0.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.3
• /
• pp.218-222
• /
• 2000

Wasted${\cdot}$rested mine areas give lots of effect on around-environmental changes after mining development. Leaching water at reclaimed land has been eluted from the solid components through physical, chemical, biological procedures by waters percolated through reclaimed site. The element analysis of waste tungsten ore tailing, leaching water analysis and removal of heavy metal by zeolite were performed to investigate the influent of acid rain on the released contents of H. M. The heavy metal contents in leaching water were determined to be As $1.21\;{\sim}\;1.54\;ppm$, Pb $0.11\;{\sim}\;0.15\;ppm$ and $SO_4\;^{2-}$ was $302\;{\sim}\;378ppm$. As deionized water and simulated acid rain (pH 3,4) were percolated through columns packed tungsten ore tailing, the amount of Mn, Na, Ca which were dissolved by pH4 solution was higher than those by distilled water. However, W and Mo were eluted easily by high pH solution. The change of heavy metal concentration by column experiment packed zeolite was effective a little because heavy metals were adsorved much more by zeolite.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.175-180
• /
• 1997

This experiment was conducted to find out the effects of lime materials application on reducing injury of simulated acid rain(SAR) in soybean grown in pot contained with sandy loam. Six treatments including control, slaked lime(SL), 1% and 2% lime water(LW) and composite treatments with SL+LW were applied. Slaked lime was applied to soil in pot before planting, and lime water was applied to leaves a day prior to the spray of SAR(pH 2.7) and normal rain(pH 6.0), and these were sprayed at 2-day intervals. Growth, yield and yield components, foliar injury rate, chrolophyll content and photosynthetic activity in leaves, content of mineral nutrients in plant and soil chemical properties were analyzed and investigated. These results obtained are summarized as follows : Seed yield of all lime treatment was reduced by SAR compared with control. But seed yield of all lime treatment was increased with treatment of lime material in soil and on leaves. After 15 and 45 times spray of SAR, all lime treatments were effective in injury reducing visible injury of leaves compared with none treatment. Chlorophyll content in leaves was highest in plants treated with slaked lime+ 1% lime water and photosynthetic activity was highest with treatment of slaked lime. Concentration of total nitrogen, phosphate, and sulfur in soybean plant were increased by the spray of SAR. Concentration of total nitrogen, potassium and calcium in soybean plant were increased with treatment of slaked lime into soil. By treatments of SAR, soil pH was decreased, and total nitrogen and sulfur concentration in soil were increased. However, available phosphate and exchangeable cations in soil such as calcium, magnesium and potassium were reduced. Soil pH, calcium and silicate concentration were increased with treatment of slaked lime into soil.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.6
• /
• pp.548-555
• /
• 1994

To compare the tolerance of crops to acid rain at different growth stages a simulated acid rain (SAR) of pH 2.7 was applied to rice, soybean, and hot pepper from vegetative growth stage to harvest (Veget.-Harvest) and from reproductive growth stage to harvest (Reprod.-Harvest). Visual damages of crops by SAR were greater in the order of rice < hot pepper < soybean and greater at Veget.-Harvest than at Reprod.-Harvest treatment. Chlorophyll content of all crops was greater in the order of Veget.-Harvest < Reprod.-Harvest treatment < control, but photosynthetic activity was not affected by SAR treatments. Nitrogen concentration and uptake of rice plants at harvest were similar among SAR treatments, but those of soybean and hot pepper were greater at Veget.-Harvest treatment than at Reprod.-Harvest treatment or control. Sulfur concentration of all crops was not affected by SAR treatments, but total sulfur uptake of soybean was greater in SAR treatments than untreated control. Grain yield of rice and soybean was not affected by SAR although grain fertility, percent ripened grains, and 1,000-grain weight of rice at Veget.-Harvest treatment were lower compared with Reprod.-Harvest treatment or control. Fruit dry weight of hot pepper was greater in the order of Veget.-Harvest < Reprod.-Harvest < control due to decreased fruit number per plant and average fruit weight. At one time application of SAR at flowering stage, brown spots were observed on the spikelets of rice at below pH 2.3. Petals of soybean and hot pepper were wilted at pH below 1. 7 and 2.0, respectively, but fruit setting was not affected by the pH of the SRA.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.279-284
• /
• 2008

We investigated whether carboxylate exudation of Brassica pekinensis Rupr. was affected by nitrate deposition from simulated acid rain. A gas chromatographic (GC) analysis was employed for the determination of low molecular weight organic acids (LOA) in rhizosphere soils, bulk soil, roots and leaves of Brassica pekinensis Rupr.. Rhizosphere soils were collected after 8 weeks of plant growth by first removing the bulk soil from the root system and then by mechanical move off the rhizosphere soil that adhered to the root surface with soft brush. Soil and plant materials were simultaneously extracted with the mixture of methanol and sulfuric acid (100:7, v/v). Seven organic acids, oxalic, malonic, fumaric, succinic, maleic, L-malic and citric acid were identified and quantified by GC equipped with FID. Oxalic, L-malic, and citric acids were found in both the bulk and rhizosphere soils, while most LOAs were not detected in the control treatment. On the contrary, except maleic acid, all other organic acids were detected in the leaves and roots of cabbages treated with nitrate deposition.

• Atmosphere
• /
• v.17 no.4
• /
• pp.393-405
• /
• 2007

Simulation results of WRF for the case of typhoon 'Rusa' were analyzed, comparing with observed data especially forjavascript:confirm_mark('abe', '1'); the Gangneung area around to examine its ability in numerical simulation. From the hourly precipitation time series, two peaks were found at Gangneung and Daegwallyeong, while only one peak was found from those of inland regions else. Especially, for the Yeongdong region, the first peak was directly related to spiral bands generated in front of the typhoon. Convective cells that were developed within the spiral bands moved to the eastern coastal area from the sea so that local heavy rainfall occurred in the Yeongdong region. The second peak was mainly related to the accompanying rain band of typhoon itself, topographic effect and the convergence near Gangneung area. Precipitation in Gangneung was simulated as much as about 30% of observed one. The main reason of this result came from a poor representation of wind directions in Gangneung area of WRF model. Observed wind direction was northwesterly but simulated one was nearly easterly in the area. This might shift a local heavy rainfall area downstream to the mountain area rather than the coastal area.

• Journal of Korean Society on Water Environment
• /
• v.25 no.1
• /
• pp.26-36
• /
• 2009

Combined sewer system (CSS) has been built in the most urban areas across the nation. During dry weather conditions, CSS works fine. But during heavy rain storms, combined sewage frequently overflows into the stream. This study simulated the hydrologic cycle and pollutant loads (BOD, SS, TN and TP) in the Mokgamcheon watershed considering combined sewer overflows (CSOs). PC storm water management model (PCSWMM) was used for continuous simulation and CSOs are considered using the flow divider. Sensitivity analysis, calibration and verification for water quantity and quality are carried out. To verify CSOs, field measurements of CSOs are compared with simulated results. As a result, 41.3% of precipitation flows into the stream directly and 1.1% of water supply flows into stream as CSOs. 6.5% of BOD total loads, 12.0% of SS, 13.6% of TP, and 29.2% of TN are from CSOs. This result will be effective to the integrated watershed management for sustainability.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.4
• /
• pp.51-57
• /
• 2024

This study was conducted on how to simulate runoff, which was done using existing physical models, using an LSTM (Long Short-Term Memory) model based on deep learning. Tancheon, the first tributary of the Han River, was selected as the target area for the model application. To apply the model, one water level observatory and four rainfall observatories were selected, and hourly data from 2020 to 2023 were collected to apply the model. River water level of the outlet of the Tancheon basin was simulated by inputting precipitation data from four rainfall observation stations in the basin and average preceding 72-hour precipitation data for each hour. As a result of water level simulation using 2021 to 2023 data for learning and testing with 2020 data, it was confirmed that reliable simulation results were produced through appropriate learning steps, reaching a certain mean absolute error in a short period time. Despite the short data period, it was found that the mean absolute percentage error was 0.5544~0.6226%, showing an accuracy of over 99.4%. As a result of comparing the simulated and observed values of the rapidly changing river water level during a specific heavy rain period, the coefficient of determination was found to be 0.9754 and 0.9884. It was determined that the performance of LSTM, which aims to simulate river water levels, could be improved by including preceding precipitation in the input data and using precipitation data from various rainfall observation stations within the basin.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1342-1344
• /
• 2002

Wind is a significant and valuable renewable energy resource. It is safe and abundant and can make an important contribution to future clean, sustainable and diversified electricity supplies. Unlike other sources of energy, wind does not pollute the atmosphere nor create any hazardous waste. In some countries wind energy is already competitive with fossil and nuclear power even without accounting for the environmental benefits of wind power. The cost of electricity from conventional power stations does not usually take full account of its environmental impact (acid rain, oil slick clean up, the effects of climate change, etc). In this paper, a transient phenomenon simulation method for Wind Power Generation System(WPGS) under real weather conditions has been proposed. The simulation method is expected to be able to analyze easily under various conditions with considering the sort of wind turbine, the capacity of system and the converter system. Wind turbine connected to the synchronous generator and power converter was simulated.