• 한국정보통신학회논문지
• /
• 제18권7호
• /
• pp.1505-1510
• /
• 2014

하이패스 시스템은 5.8 GHz대 무선통신방식을 채용하는 기본 요소 중의 하나이며, 지능교통정보시스템(ITS; Intelligent Traffic System)을 실현하는 한 부분이다. 그러나, 하이패스 시스템에서 신호에러, 다중반사, 또는 시스템간 간섭으로 인한 통신 오류는 자주 발생한다. 이와 같은 문제점을 해결하기 위하여 전자파흡수체가 적용될 수 있으며, 이를 위하여 카본, 센더스트 및 CPE의 조성비가 각각 다른 몇 가지 샘플을 제작하여 최적의 조성비를 탐색하였다. 그 결과 최적 조성비는 Carbon : Sendust : CPE is 10 : 40 : 50 wt.%임이 확인되었다. 복소 비유전율과 복소 비투자율은 측정 데이터를 이용하여 도출하였으며, 흡수체의 최적 설계 파라미터들은 시뮬레이션에 의하여 결정하였다. 나아가서, 전파흡수능을 흡수체의 두께를 변화시키면서 계산한 결과, 설계한 전파흡수체의 흡수능은 5.8 GHz에서 22.4 dB였다. 설계치에 기반을 두고 제작한 흡수체의 특성은 설계/시뮬레이션 값과 잘 일치하므로, 논문에 제안 개발된 하이패스용 전파흡수체는 실제 상황에 적용될 수 있을 것이다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권4호
• /
• pp.447-453
• /
• 2013

Compensating characteristics of a voltage sag/swell compensator utilizing single-phase matrix converter is examined. First, system configuration and operation for both voltage sag and swell are described. Next, in order to suppress pulsations of the source voltage, a countermeasure using low pass filter and all pass filter is introduced. Then, compensating characteristics of the compensator are investigated for R-L load by simulation. Finally, the validity of the simulated results is confirmed by the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1841-1843
• /
• 2001

Asymmetrical parallel coupled lines are used in a number of circuits such as multi-band coupler and combline type band pass filter. Although graphical results and formulas are available for the design of coupled lines, the design procedure is hard to use, because even- and odd- mode impedances are always expressed in terms of the physical geometry. In this paper, we introduce a method to find design parameter using finite element analysis. By employing the capacitance obtained by FE analysis, design parameters for each lines are extracted. To show the validity of extracted design parameter for asymmetrical parallel coupled line, we have designed and simulated a planar type combline band pass filter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.653-655
• /
• 1997

In this paper, a monoblock dielectric filter for 900MHz band CT-1 is designed by using CAD(Computer Aided Design). Equivalent circuit for monoblock dielectric filter represented by parallel coupled stripline is simulated by using SuperCompact software tool. A Designed filter structure is simulated by using HFSS to optimize result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1858-1860
• /
• 1999

To fabricate superconducting multiplexers with narrow pass band characteristics and reduce the physical size of device, we have designed multiplexer using hair-pin type filters with the center frequency of 13.6 GHz. Multiplexers have been fabricated superconductor(HTS), because It has low surface resistance. The $YBa_2Cu_3O_{7-{\delta}}$(YBCO) films were deposited on MgO substrates$(20{\times}20{\times}0.5mm^3)$ by using pulsed laser deposition and conventional photo-lithographic methods were used to pattern the multiplexer. Epitaxial YBCO films were grown on(100) MgO substrates and showed strongly c_axis orientations observed by X-ray diffraction technique. Superconducting transition temperatures were measured to be about 89K. Simulated results of superconducting multiplexer consisting of hair-pin type filters show the insertion loss of about 1.2dB. The measured frequency response will be compared with the simulated results.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1014-1019
• /
• 2013

Signal processing techniques based on fractional order calculus have been successfully applied in analyzing heavy-tailed non-Gaussian signals. It was found that the surface EMG signals from the muscles having nuero-muscular disease are best modeled by using the heavy-tailed non-gaussian random processes. In this regard, this paper describes an application of digital fractional order lowpass differentiators(FOLPD, weighted FOLPD) based on the fractional order calculus in detecting peaks of surface EMG signal. The performances of the FOLPD and WFOLPD are analyzed based on different filter length and varying MUAP wave shape from recorded and simulated surface EMG signals. As a results, the WFOLPD showed better SNR improving factors than the existing WLPD and to be more robust under the various surface EMG signals.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.431-434
• /
• 2004

The design, simulation, modeling and measurement of a RF switch module for GSM applications were presented in this paper. switch module were simulated by ADS and constructed using a LTCC multi-layer switching circuit and integrated low pass filter, designed to operate in the GSM band. Insertion and return losses at 900 MHz of the low pass filters were designed to lower than 0.3 dB and higher than 12.7 dB respectively. The switch module constructed, contained 10 embedded passives and 3 surface mounted components integrated on $4.6{\times}4.8{\times}1.2$ m volume, 6-layer integrated circuit. The insertion loss of switch module at m MHz were around 11 dB.

• 소성∙가공
• /
• 제14권8호통권80호
• /
• pp.704-711
• /
• 2005

The influence of process parameters in drawn wire on residual stresses was investigated. Based on a FE-simulation of the wire drawing process, the effects of process parameters such as semi-die angle, reduction, friction coefficient and bearing length on the residual stresses were investigated. The validity of the FE-simulation results was verified by the comparison of the previous simulated results with experimental data. In this study, semi-die angle and die reduction have significant effect on the residual stresses at the surface of drawn wire. Several methods such as, addition of axial tension, application of skin pass, straightening in multi-roll straightener etc, were suggested in the previous studies to reduce the residual stresses. In this study, the results show that the concurrent application of skin pass with low die reduction and low semi-die angle at the final stage of drawing operation reduces dramatically the both axial and hoop residual stresses after drawing

• 한국정보전자통신기술학회논문지
• /
• 제8권2호
• /
• pp.128-132
• /
• 2015

논문은 이중 급전을 갖는 마이크로스트립 이중 모드 대역 통과 필터를 제안한다. 제안된 필터는 이중 모드 구현을 위해 모서리 부분을 제거되고, 직교 슬롯을 포함하는 정사각형 패치와 이중 급전 구조로 구성된다. 직교 슬롯은 공진기의 소형화 및 불요신호를 억압하기 위해 사용되고, 상측 차단 대역에서의 차단 특성을 개선하기 위해 이중 급전 구조를 사용하였다. 보다 자세한 필터 설계 방법 및 특성 결과를 본문에 기술하였다.

• 한국전자파학회논문지
• /
• 제19권8호
• /
• pp.884-890
• /
• 2008

본 논문에서는 어드미턴스 인버터로 구성된 대역 통과 여파기의 주파수 응답 특성을 고찰하고, 그 결과 통과 대역을 중심으로 하여 상 하측 주파수 저지 대역의 신호 감쇠 특성이 비대칭임을 확인한다. 인버터로 구성된 대역 통과 여파기의 비대칭적인 감쇠 특성을 개선하기 위해 변형된 회로의 구조와 설계식을 제안한다. 제안된 회로 구조와 설계식을 이용하여 대역 통과 여파기를 설계하고, 설계된 여파기의 특성을 시뮬레이션 및 실험을 통하여 비대칭적인 감쇠 특성이 최적화 설계 기법이나 반복 설계 및 실험 과정 없이 보정됨을 확인한다.