• 대기
• /
• 제26권4호
• /
• pp.599-615
• /
• 2016

This study investigates the accuracy of short-term ocean predictions during the development of ocean stratification for the Korea Meteorological Administration (KMA) Global Seasonal Forecast System version 5 (GloSea5) as well as the effect of atmosphere-ocean coupling on the predictions through a series of sensitive numerical experiments. Model performance is evaluated using the marine meteorological buoys at seas around the Korean peninsular (KP), Tropical Atmosphere Ocean project (TAO) buoys over the tropical Pacific ocean, and ARGO floats data over the western North Pacific for boreal winter (February) and spring (May). Sensitive experiments are conducted using an ocean-atmosphere coupled model (i.e., GloSea5) and an uncoupled ocean model (Nucleus for European Modelling of the Ocean, NEMO) and their results are compared. The verification results revealed an overall good performance for the SST predictions over the tropical Pacific ocean and near the Korean marginal seas, in which the Root Mean Square Errors (RMSE) were $0.31{\sim}0.45^{\circ}C$ and $0.74{\sim}1.11^{\circ}C$ respectively, except oceanic front regions with large spatial and temporal SST variations (the maximum error reached up to $3^{\circ}C$). The sensitive numerical experiments showed that GloSea5 outperformed NEMO over the tropical Pacific in terms of bias and RMSE analysis, while NEMO outperformed GloSea5 near the KP regions. These results suggest that the atmosphere-ocean coupling substantially influences the short-term ocean forecast over the tropical Pacific, while other factors such as atmospheric forcing and the accuracy of simulated local current are more important than the coupling effect for the KP regions being far from tropics during the development of ocean stratification.

• Steel and Composite Structures
• /
• 제33권4호
• /
• pp.615-627
• /
• 2019

This paper aims to study the compressive behavior of circular hollow and concrete-filled steel tubular stub columns under simulated marine atmospheric corrosion. The specimens after salt spray corrosion were tested under axial compressive load. Steel grade and corrosion level were mainly considered in the study. The mechanical behavior of circular CFST specimens is compared with that of the corresponding hollow ones. Design methods for circular hollow and concrete-filled steel tubular stub columns are modified to consider the effect of marine atmospheric corrosion. The results show that linear fitting curves could be used to present the relationship between corrosion rate and the mechanical properties of steel after simulated marine atmospheric corrosion. The ultimate strength of hollow steel tubular and CFST columns decrease with the increase of corrosion rate while the ultimate displacement of those are hardly affected by corrosion rate. Increasing corrosion rate would change the failure of CFST stub column from ductile failure to brittle failure. Corrosion rate would decrease the ductility indexes of CFST columns, rather than those of hollow steel tubular columns. The confinement factor ${\xi}$ of CFST columns decreases with the increase of corrosion rate while the ratio between test value and nominal value shows an opposite trend. With considering marine atmospheric corrosion, the predicted axial strength of hollow steel tubular and CFST columns by Chinese standard agree well with the tested values while the predictions by Japanese standard seem conservative.

• 대기
• /
• 제16권4호
• /
• pp.279-301
• /
• 2006

This study analyzed the characteristics of the wind waves near the Korean marginal seas in the 2002 - 2005 year using the third generation wave model, WAVEWATCH - III model. In order to investigate the model performance, model results were compared with the marine meteorological observation results. The 4 years average correlation coefficient between model and observation shows very high value of about 0.77. The model of this study represents very well the characteristics of wind waves near the Korean marginal seas. Simulated monthly sea surface winds and wind waves show the evident spatial variations and this model also simulates very well seasonal characteristics of wind waves in this region.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.696-704
• /
• 2009

In this paper, the flow characteristics through an industrial safety relief valve used to protect the crankcase room in a large-sized marine engine have been numerically investigated using the moving-mesh strategy. With the room pressure higher than the cracking one, the spring-loaded disc becomes open and then the air in the room blows off into the atmosphere, resulting in the reduction of the room pressure and then the shutoff of the disc. Numerical simulations are performed on the compressible air flow through the relief valve (${\phi}160mm$) with the initial room pressure (0.11 bar or 0.12bar) higher than the cracking one (0.1 bar). The numerical method has been validated by comparing the results with the empirical ones. Results show that the disc motion and flow characteristics can be successfully simulated using the moving-mesh strategy and depend strongly on the spring stiffness and the flow passage shape. With increasing spring stiffness, the maximum disc displacement decreases and thus the total disc-opening time also decreases. In addition, the flow passage shape makes a significant effect on the velocity and direction of the flow.

• Ocean Science Journal
• /
• 제43권4호
• /
• pp.165-173
• /
• 2008

In this article, we describe a simple yet effective method for insertion of observational datasets in a mesoscale atmospheric model used in one-dimensional configuration through Nudging. To demonstrate the effectiveness of this technique, vertical profiles of meteorological parameters obtained from GLASS Sonde launches from a tiny island of Kaashidhoo in the Republic of Maldives are injected in a mesoscale atmospheric model - Advanced Regional Prediction System (ARPS), and model simulated parameters are compared with the available observational datasets. Analysis of one-time nudging in the model simulations over Kaashidhoo show that incorporation of this technique reasonably improves the model simulations within a time domain of +6 to +12 Hrs, while its impact on +18 Hrs simulations and beyond becomes literally null.

• 대기
• /
• 제19권1호
• /
• pp.93-106
• /
• 2009

Analysis has been made on the wind wave characteristics in terms of significant wave height ($H_s$) near the Korean marginal seas in the 2006 - 2007 year using the third generation wave model, WAVEWATCH - III model. In order to evaluate its performance, its results were compared with the observed data using KMA ocean buoy. The two year average RMSE between modeled and observed Hs shows reasonably small value of about 0.37 m. The accuracy of predicted values in the year 2007 is increased mainly due to finer model grid size and better accurate wind field. The model used in this study predicts very well the characteristics ($H_s$) of wind waves near the Korean Peninsular. Simulated monthly wind waves show the evident seasonal variations due to Typhoons in summer season. When Typhoons approach to Korean Peninsular, the accuracy of wind waves predictions is lower than that of annual mean value.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권2호
• /
• pp.33-40
• /
• 2000

해상에 설치되는 담수화 공장의 가동에 따른 환경영향평가를 위하여 고온고염 배출수의 확산을 예측하였다. 진해만에 설치될 담수화 공장에서는 200ton/일의 해수를 유입하여 50ton은 담수화 하고 150ton은 고온고염수로서 배출한다. 배출되는 해수의 수온은 15℃ 상승되며, 염분은 약 1.33배 증가된다. 배출수의 확산예측에서는 2차원 조류모델로 이류를 계산하며, 몬테카르로 방법으로 난류확산을 재현한다. 배출수에 의한 수온상승의 예측에서는 대기를 통한 열량 방출을 감소요인으로 고려하였으며, 100일간의 계산을 통하여 평형상태의 확산분포를 재현하였다. 고염수에 의한 확산에서는 감쇠가 없는 것으로 간주하였으며, 약 1년간의 계산을 통하여 평형상태의 확산분포를 재현하였다. 평형상태에서 배출수에 의한 수은상승과 염분상승은 배수구 근처에 국한되어 나타났으며, 각각 약 0.01℃와 0.001‰의 상승폭을 보였다.

• 대기
• /
• 제34권3호
• /
• pp.305-317
• /
• 2024

The study examines the effects of parameters that define the characteristics of raindrops on the simulated precipitation during the summer season over Korea using the Weather Research and Forecasting (WRF) Double-Moment 6-class (WDM6) cloud microphysics scheme. Prescribed parameters, defining the characteristics of hydrometeors in the WDM6 scheme such as a_R, b_R, and f_R in the fall velocity (V_R) - diameter (D_R) relationship and shape parameter (𝜇_R) in the number concentration (N_R) - D_R relationship, presents different values compared to the observed data from Two-Dimensional Video Disdrometer (2DVD) at Boseong standard meteorological observatory during 2018~2019. Three experiments were designed for the heavy rainfall event on August 8, 2022 using WRF version 4.3. These include the control (CNTL) experiment with original parameters in the WDM6 scheme; the MUR experiment, adopting the 50th percentile observation value for 𝜇_R; and the MEDI experiment, which uses the same 𝜇_R as MUR, but also includes fitted values for a_R, b_R, and f_R from the 50th percentile of the observed V_R - D_R relationship. Both sensitivity experiments show improved precipitation simulation compared to the CNTL by reducing the bias and increasing the probability of detection and equitable threat scores. In these experiments, the raindrop mixing ratio increases and its number concentration decreases in the lower atmosphere. The microphysics budget analysis shows that the increase in the rain mixing ratio is due to enhanced source processes such as graupel melting, vapor condensation, and accretion between cloud water and rain. Our study also emphasizes that applying the solely observed 𝜇_R produces more positive impact in the precipitation simulation.

• 한국식품저장유통학회지
• /
• 제24권6호
• /
• pp.734-745
• /
• 2017

장기 해상운송 시 포도과실의 신선도 유지 및 수입국에서의 유통기간 연장을 통한 수출국 다변화 및 수출경쟁력 향상을 위해, 모의수출조건 및 실제 수출 시 유황패드와 MA포장 복합처리에 따른 포도과실의 선도유지 효과를 검토하였다. 캠벨얼리 포도는 경기도 화성지역에서 재배되었으며 2016년 8월 말에 수확하여, 예냉은 $0^{\circ}C$, 선별 및 포장은 $10^{\circ}C$에서 실시하였고 $0^{\circ}C$에 30일간 저장하였다. 시험처리는 관행 수출포장(대조구), 유황패드처리, 유황패드+MA 복합처리의 3가지로 하였다. 모의수출 조건인 $0^{\circ}C$, 30일 저장 시 포도상자 내부의 온도와 상대습도는 처리에 따라 약간의 차이가 있기는 했으나 각각 $0.6-2^{\circ}C$, 94-100% 범위 내에서 안정적으로 유지되었다. 무처리와 유황패드 단독처리의 경우 저장기간이 경과할수록 경도의 감소, 과경의 갈변, brush 길이의 감소, 탈립률의 증가 등에서 유황패드+MA 복합처리와 유의적인 차이를 보였다. 유황패드+MA 복합처리의 경우 MA포장에 의한 선도유지 효과와 더불어 PE필름으로 인해 저장 30일 후에도 포장 내부에 2.9 ppm 정도의 $SO_2$ 농도가 유지되면서 장기 저장 및 운송 시 포도의 품질을 가장 잘 유지시켜 주는 것으로 나타났으며, 이러한 효과는 $15^{\circ}C$, 7일 저장의 모의유통조건에서도 동일하게 나타났다. 또한 수확 후 11일간의 해상운송을 거쳐 미국 현지 소매점에 유통될 때까지 30일이 소요된 대미수출 포도의 경우에도 모의수출 조건에서 수행된 것과 동일한 결과를 보였다. 미국 현지에서 품질 조사 수행 결과, 유황패드+MA 복합처리에서만 4.0 ppm의 $SO_2$가 측정되었으며 신선도 유지를 통한 상품성 보존이나 현지에서의 유통기한 연장 효과도 가장 우수한 것으로 나타났다. 결과적으로 장기 해상운송에 의한 캠벨얼리 포도 수출 시 유황패드+MA 복합처리는 상품성 및 유통기간 연장에 매우 효과적인 방법이라고 판단된다.

• 대기
• /
• 제28권1호
• /
• pp.37-51
• /
• 2018

In this study, we investigate the performance of Global Seasonal Forecasting System version 5 (GloSea5) in Korea Meteorological Administration on the relationship between El $Ni{\tilde{n}}o$ and East Asian climate for the period of 1991~2010. It is found that the GloSea5 has a great prediction skill of El $Ni{\tilde{n}}o$ whose anomaly correlation coefficients of $Ni{\tilde{n}}o$ indices are over 0.96 during winter. The eastern Pacific (EP) El $Ni{\tilde{n}}o$ and the central Pacific (CP) El $Ni{\tilde{n}}o$ are considered and we analyze for EP El $Ni{\tilde{n}}o$, which is well simulated in GloSea5. The analysis period is divided into the developing phase of El $Ni{\tilde{n}}o$ summer (JJA(0)), mature phase of El $Ni{\tilde{n}}o$ winter (D(0)JF(1)), and decaying phase of El $Ni{\tilde{n}}o$ summer (JJA(1)). The GloSea5 simulates the relationship between precipitation and temperature in East Asia and the prediction skill for the East Asian precipitation and temperature varies depending on the El $Ni{\tilde{n}}o$ phase. While the precipitation and temperature are simulated well over the equatorial western Pacific region, there are biases in mid-latitude region during the JJA(0) and JJA(1). Because the low level pressure, wind, and vertical stream function are simulated weakly toward mid-latitude region, though they are similar with observation in low-latitude region. During the D(0)JF(1), the precipitation and temperature patterns analogize with observation in most regions, but there is temperature bias in inland over East Asia. The reason is that the GloSea5 poorly predicts the weakening of Siberian high, even though the shift of Aleutian low is predicted. Overall, the predictability of precipitation and temperature related to El $Ni{\tilde{n}}o$ in the GloSea5 is considered to be better in D(0)JF(1) than JJA(0) and JJA(1) and better in ocean than in inland region.