• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.610-620
• /
• 2015

An inherent zero-voltage and zero-current-switching phase-shifted full-bridge converter with reverse-blocking insulated-gate bipolar transistor (IGBT) or non-punch-through IGBT is proposed in this paper. This converter not only ensures that the switches in the lagging leg works at zero-current switching, but also minimizes circulating conduction loss without any additional auxiliary circuits. A 1.2 kW hardware prototype is designed, fabricated, and tested to verify the proposed topology. The control loop design procedures with small-signal models are also presented. A simple, low-cost, and robust democratic current-sharing circuit is also introduced and verified in this study. The proposed converter is a suitable alternative for compact, cost-effective applications with high-voltage input.

• Journal of the Korean Statistical Society
• /
• v.23 no.2
• /
• pp.367-378
• /
• 1994

Let P and Q be probability measures of a measurable space $(\Omega, F)$, and ${F_n}_{n \geq 1}$ be a sequence of increasing sub $\sigma$-fields which generates F. For each $n \geq 1$, let $P_n$ and $Q_n$ be the restrictions of P and Q to $F_n$, respectively. Under the assumption that $Q_n \ll P_n$ for every $n \geq 1$, a zero-one condition is derived for P and Q to have the dichotomy, i.e., either $Q \ll P$ or $Q \perp P$. Then using this condition and the Kolmogorov's zero-one law, we give new and simple proofs of the dichotomy theorems for a pair of Gaussian measures and Poisson processes with examples.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.4
• /
• pp.756-762
• /
• 2009

This paper proposes a high efficient Dual Buck Inverter design with a zero voltage switching (ZVS) control technique. The ZVS control is realized by adding a feedback loop circuit which is implemented by simple RS latch and TTL gate. The used load was 200W -Ceramic Metal Halide Lamp. The experimental results show that the proposed Inverter system could avoid the acoustic resonance and achieve high efficiency by Zero Voltage Switching.

• Proceedings of the KIEE Conference
• /
• 1999.11a
• /
• pp.13-15
• /
• 1999

The zero voltage and zero current switching(ZVZCS) full bridge (FB) PWM converter using secondary active clamp is characterized by high efficiency, good ZVZCS characteristic, simple topology and low cost. But at the period for discharge of the secondary clamp capacitor, peak pulses and ringing pulse occur in rectified secondary side of the converter. In this paper, a novel secondary active clamp circuit for the ZVZCS FB PWM converter is proposed and a 50 kHz, 500 W prototype converter was experimented for verification of the converter characteristics. It was verified that high voltage peak pulses and ringing pulse on secondary rectified waveforms of the converter are decreased effectively.

• Journal of the Optical Society of Korea
• /
• v.20 no.4
• /
• pp.464-469
• /
• 2016

All-optical non-return-to-zero (NRZ) -to- return-to-zero (RZ) data-format conversion has been successfully demonstrated using a semiconductor optical amplifier in a fiber-loop mirror (so-called SOA-loop mirror) with a continuous-wave (CW) holding beam. The converted RZ signal after pulse compression has been used to create a 40 Gb/s OTDM (Optical Time Division Multiplexing) signal. Here is proposed an NRZ-to-RZ conversion method without any additional optical clocks, unlike conventional methods based on optical AND logic. In addition, it has the merit of operating at various bit-rate speeds without any controlling device. Moreover, it has a simple structure, and it can be used for all-optical bit-rate-flexible clock recovery.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1348-1350
• /
• 2000

Zero-voltage and zero-current switched single-stage approach with high power factor is presented to reduce the switching losses and to achieve sinusoidal, unity power factor input currents. This single-stage approach, which combines a boost converter used as PFC with a half-bridge converter used as do to do conversion into one power stage, has a simple structure and low cost. At the same time, since the switches of the proposed converter are designed to be turned on at zero-voltage and off at zero-current, the switching losses could be reduced considerably. Detailed analysis and experimental results are presented on the proposed converter, which is operated at constant switching frequency and in discontinuous conduction mode.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.200-204
• /
• 2001

A ZVZCS(Zero Voltage and Zero Current Switching) Three Level DC/DC Converter is presented to secondary auxiliary circuit. The new converter presented in this paper used a phase shift control with a flying capacitor in the primary side to achieve ZVS for the outer switch. A secondary auxiliary circuit, which consists of one small capacitor two small diode and one coupled inductor is added in the secondary to provides ZVZCS conditions to primary switches, ZVS for outer switches and ZCS for inner switches. Many advantages including simple circuit topology high efficiency, and low cost make the new converter attractive for high power applications. The principle of operation, feature and design considerations are illustrated and verified through the experiment with a 1kW 50kHz IGBT based experimental circuit.

• Journal of Power Electronics
• /
• v.2 no.4
• /
• pp.278-287
• /
• 2002

A novel zero-voltage and zero-current switching PWM DC-DC converter with lowered conduction losses is presented in this paper. A new double two-switch forward high frequency transformer type soft-switching converter topology is developed to minimize circulating currents occurs during freewheeling period. This converter has advantages as less number of the components, simple control principle under constant operation frequency, free of transformer Imbalance effect. The principle of operation is illustrated with steady-state analysis. Moreover, the effectiveness of the proposed converter topology is verified by implementation of a 500w-100kHz breadboard using IGBTs.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.33 no.2
• /
• pp.295-303
• /
• 2023

As the cloud computing market grows, a variety of cloud services are now reliably delivered. Administrative agencies and public institutions of South Korea are transferring all their information systems to cloud systems. It is essential to develop security solutions in advance in order to safely operate cloud services, as protecting cloud services from misuse and malicious access by insiders and outsiders over the Internet is challenging. In this paper, we propose a zero trust model for cloud storage services that store sensitive data. We then verify the effectiveness of the proposed model by operating a cloud storage service. Memory, web, and network forensics are also performed to track access and usage of cloud users depending on the adoption of the zero trust model. As a cloud storage service, we use Amazon S3(Simple Storage Service) and deploy zero trust techniques such as access control lists and key management systems. In order to consider the different types of access to S3, furthermore, we generate service requests inside and outside AWS(Amazon Web Services) and then analyze the results of the zero trust techniques depending on the location of the service request.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.30-35
• /
• 1993

Simple recurrence relations for calculating completion times of various storage polices (unlimited, intermediate storages(FIS), finite intermediate storages(FIS), no intermediate storage(NIS), zero wait(ZW) for serial multi-product multi-unit processes are suggested. Not only processing times but also transfer times, set-up (clean-up) times of units and set-up times of storages are considered. Optimal scheduling strategies with zero transfer times and zero set-up times had been developed as a mixed integer linear programniing(MILP) formulation for several intermediate storage policies. In this paper those with non-zero transfer times, non-zero set-up times of units and set-up times of storages are newly proposed as a mixed integer nonlinear programming(MINLP) formulation for various storage polices (UIS, NIS, FIS, and ZW). Several examples are tested to evaluate the robustness of this strategy and reasonable computation times.