• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.914-919
• /
• 2008

This present was carried out to evaluate the adaptability of stabilization method which was used industrial byproducts as the stabilization agency in the abandoned mine site. In order to investigate stabilization effect on As-contaminated soils treated by industrial by-products, batch tests and column tests were carried out with As-contaminated soils collected from farmland around the abandoned mine site. ZVI(zero valent iron) and SRS(steel refining slag) was shown a good treatment effect. After the column test, sequential extraction test and simple bioavailability extraction test(SBET) were carried out to analysis of the soil, and scanning electron micrograph(SEM) analysis was carried out to compare the morphology and structure of ZVI and SRS before and after reacting with arsenic in the soil. As a result, ZVI and SRS were shown 93%, 62% reduction of As concentration respectively by comparison with untreated soils. Therefore, if ZVI and SRS are used as treatment materials in As-contaminated soils, it is expected that the As leaching from soils is reduced effectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.176-181
• /
• 2010

The evaluation of shear modulus (or shear wave velocity) profile of the site is very important in various fields of geotechnical engineering. In the field, there exist spatial variations of shear modulus that case uncertainty in the geotechnical analysis or design. So it is necessary to evaluate the spatial variation of shear wave velocities of the soil site. In this study, the HWAW method is applied to the determination of a 3-D Vs map of soil site. The HWAW method, which is based on harmonic wavelet transforms, has been developed to determine phase and group velocities of waves. The HWAW method uses only the signal portion of the maximum local signal/noise ratio to evaluate the phase velocity in order to minimize the effect of the noise. The field testing of this method is relatively simple and fast because only one experimental setup, which consists of one pair of receivers on the surface, is needed using a short receiver spacing setup (1~3m). These characteristics make it possible to determine detailed local Vs profile in the site with lateral Vs variation and to evaluate 3-D Vs map by performing a series of tests on the grid. To estimate the applicability of the proposed method, field tests were performed. Through field applications validity and applicability of the proposed method were verified.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.5
• /
• pp.291-299
• /
• 2003

The effect of temperature and soil confining stress on geosyntheic creep behaviour was studied by performing the temperature dependent confined creep tests for HDPE geogrid and geomembrane specimen. The visco-elastic creep coefficients of the geosynthetics were evaluated by the test results and it was proposed that the simple expressions for the instantaneous and limit creep strain of geosynthetics was considered as a function of temperature and confining stress on geosynthetics. Based on the time-temperature superposition principle, a master curve has been drawn for extrapolating tensile creep strains to longer time intervals(1$\times$10 $^7$min.∼1$\times$10$^{10}$min.). By using this master curves, the shift factors which can be used in establishing master curve considering confining stress on geosynthetics were carried out. Each tests was performed during 8,000∼12,000 min., with temperature ranging between 5$^{\circ}C$ and 4$0^{\circ}C$ and with confining stress ranging between 0 t/$m^2$ and 9 t/$m^2$.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.6
• /
• pp.460-470
• /
• 2015

In general ships and FPSOs, roll damping is very small and consequently roll motion is very large at the roll resonance frequency. Proper evaluation of the roll damping coefficient at the resonance frequency is an important task in the study of roll motion and usually it is done by the analysis of free roll decay tests. The relative decrement method based on energy relation has been used mainly for the evaluation of roll damping coefficient from the roll decay test so far. As another method, the logarithmic decrement method based on equivalent linear decay assumption can be used for the same purpose and it is relatively simple. In this paper, both of the relative decrement method and the logarithmic decrement method are used for the evaluation of roll damping coefficient including quadratic damping from the free roll decay tests, and their results are cross-checked for verifying the obtained damping coefficients. Through applications to a box-type floating body equiped with bilge keels, it is shown that the two methods give almost the same damping coefficients in a practical view point and the cross-check of their results is to be a good tool to prevent a possible error. And also the quantitative effects of the bilge keels on the roll damping of box-type floating body are shown and discussed.

• The Korean Journal of Applied Statistics
• /
• v.26 no.1
• /
• pp.81-92
• /
• 2013

It is important to construct a firm basis for accusing potential violators of academic integrity in order to avoid spurious accusations and false convictions. Educational researchers have developed many statistical methods that can either uncover or confirm cases of cheating on tests. However, most of them rely on simple correlation-based measures, and often fail to account for patterns in responses or answers. In this paper, we propose a new statistical index denoted by a Standardized Signed Entropy Similarity Score to resolve this difficulty. In addition, we apply the proposed method to analyze a real data set and compare the results to other existing methods.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.110-117
• /
• 2007

In vitro toxicity tests such as cytotoxicity, mutagenicity and genotoxicity assay are useful for evaluating the relative toxicity of smoke or smoke condensates obtained from different cigarette configurations. A major disadvantage of these tests is relatively time-consuming, complicated and expensive. Recently, a cell-free glutathione consumption assay (GCA) as a rapid and simple screening method for the toxicity assessment of smoke has been reported by Cahours et al. (CORESTA, 2006). This study was carried out to assess the GCA application capable of predicting the toxicity of gas/vapor phase (GVP) of cigarette smoke and to identify individual compounds responsible for the glutathione (GSH) consumption in smoke. Each GVPs from 2R4F, standard cigarette, carbon filter cigarette (ExC) and new carbon filter cigarette (ExN), test cigarettes were collected by automatic smoking machine and evaluated the relative toxicity by GCA and neutral red uptake (NRU) assay. Toxic compounds existed in smoke were also chosen, relative toxicities of these compounds were screened by using two methods and compared individually. The overall order of toxicity by GCA was 2R4F > ExC > ExN, which was consistent with the result of Neutral Red Uptake assay. The levels of carbonyl compounds of ExN were lower than those of 2R4F and ExC, indicating that GSH consumption was associated with carbonyl compound yields. A major toxicant under current study is acrolein, which contributed to more than half of the GSH consumption. Collectively, the toxicity of GVP determined by GCA method may be mainly attributed to acrolein.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1549-1556
• /
• 2011

Tensile and creep tests were performed at various temperatures to investigate the mechanical properties of plastics used in automotive instrument panels. Mechanical properties such as Young's modulus and Poisson's ratios changed markedly with the test temperature. Three-point bending creep tests were performed for three kinds of plastics under four loading conditions. Coefficients in the time-hardening power law creep equation were obtained from the experiment, and the creep behavior was represented by a simple expression. The results of finite element creep analysis showed good agreement with the experimental results, while the difference between the numerical and experimental results increased with the load.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1199-1203
• /
• 2011

Nanocomposites were prepared through the compounding of rubber and clay. Measurements of the static and dynamic mechanical properties of different compositions over a temperature range $70-100^{\circ}C$ showed that the mechanical properties of these rubber/clay nanocomposites are superior to those of existing rubber materials. In this study, by using the parameter of the maximum Green.Lagrange strain appearing at certain locations, the relationship between fatigue life and maximum Green.Lagrange strain, and the correlations between test-piece tests and bench tests of actual rubber components are proved. In order to predict the fatigue life of rubber components at the design stage, a simple procedure of life prediction is suggested. The predicted fatigue lives of the rubber engine mounts agree fairly well with the fatigue lives determined experimentally.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.305-314
• /
• 2003

The ROPS of an agricultural tractor is designed to protect its driver when the tractor overturns. Although the current OECD tests to determine whether the ROPS meets the requirements of the OECD regulation are desirable, they need long time to test. We experimental time and effort by using CAE. We conducted a finite element analysis for the ROPS design of a Dae-Dong tractor cabin in an attempt to reduce the design and manufacturing time. This study shows the interpretative skill using MARC(v.2000) for designing ROPS and difference between the results of testing and FEA. Design process is generally divided into two phases: a concept and a detail design. The concept design uses simple analysis to predict structural behavior, whereas the detail design involves a finite element analysis performed by the results of the concept design. This study focused on the detail design and used Patran(v.2000r2) and MARC(v.2000) of the MSC software corporation. The model consisted of 4812 elements and 4582 nodes. Four tests. specified in the OECD standards, were performed: (1) longitudinal loading test (2) rear crushing test (3) side loading test (4), and front crushing test. Independent analyses were also performed for each test, along with a sequential analysis. When compared, the results of the independent and sequential analyses were found to be similar to the test results.

• School Mathematics
• /
• v.9 no.1
• /
• pp.45-64
• /
• 2007

The primary purposes of this study were to investigate how sixth graders would react to the types of tasks with regard to the comprehension of graphs and what differences might be among the kinds of graphs, and to raise issues about instructional methods of graphs. A descriptive study through pencil-and-paper tests was conducted. The tests consisted of 48 questions with 4 types of tasks (reading the data, reading between the data, reading beyond the data, and understanding the situations) and 6 kinds of graphs. The conclusions drawn from the results obtained in this study were as follows: First, it is necessary to foster the ability of interpreting the data and understanding the situation in graphs as well as that of reading the data and finding out the relationships in the data. Second, it is informative for teachers to know students' difficulties and thinking processes. Third, in order to develop understanding of graphs, it is important that students solve different types of tasks beyond simple question-answer tasks. Fourth, teachers need to pay attention to teach fundamental factors such as reading the data with regard to line graphs and stem-and-leaf plots Finally, graph type and task type interact to determine graph-comprehension performance. Therefore, both learning all kinds of graphs and being familiar with multiple types of tasks are important.