• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.198-204
• /
• 2019

In this study, we propose a wearable force sensor using 3D printed mold and liquid metal. Liquid metal, such as Galinstan, is one of the promising functional materials in stretchable electronics known for its intrinsic mechanical and electronic properties. The proposed soft force sensor measures the external force by the resistance change caused by the cross-sectional area change. Fused deposition modeling-based 3D printing is a simple and cost-effective fabrication of resilient elastomers using liquid metal. Using a 3D printed microchannel mold, 3D multichannel Galinstan microchannels were fabricated with a serpentine structure for signal stability because it is important to maintain the sensitivity of the sensor even in various mechanical deformations. We performed various electro-mechanical tests for performance characterization and verified the signal stability while stretching and bending. The proposed sensor exhibited good signal stability under 100% longitudinal strain, and the resistance change ranged within 5% of the initial value. We attached the proposed sensor on the finger joint and evaluated the signal change during various finger movements and the application of external forces.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.6
• /
• pp.518-527
• /
• 2021

Purpose: The incidence of hepatic steatosis among children has been increasing; however, data distinguishing simple steatosis from a more complex disorder are lacking. Methods: This study identified the etiologies resulting in hepatic steatosis through a retrospective review of pediatric liver biopsies performed in the last 10 years. A total of 158 patients with hepatic steatosis proven by histopathological evaluation were enrolled in the study, and baseline demographic features, anthropometric measurements, physical examination findings, laboratory data, ultrasonographic findings, and liver histopathologies were noted. Results: The two most common diagnoses were inborn errors of metabolism (IEM) (52.5%) and nonalcoholic fatty liver disease/steatohepatitis (NAFLD/NASH) (29.7%). The three most common diseases in the IEM group were glycogen storage disorders, Wilson's disease, and mitochondrial disease. The rates of consanguineous marriage (75.6%; odds ratio [OR], 26.040) and positive family history (26.5%; OR, 8.115) were significantly higher (p=0.002, p<0.001, respectively) in the IEM group than those in the NAFLD/NASH group. Younger age (p=0.001), normal anthropometric measurements (p=0.03), increased aspartate aminotransferase levels (p<0.001), triglyceride levels (p=0.001), and cholestatic biochemical parameters with disrupted liver function tests, as well as severe liver destruction of hepatic architecture, cholestasis, fibrosis, and nodule formation, were also common in the IEM group. Conclusion: Parents with consanguinity and positive family history, together with clinical and biochemical findings, may provide a high index of suspicion for IEM to distinguish primary steatosis from the consequence of a more complex disorder.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.105-114
• /
• 2021

ESICD(Electrical Signal Interface Control Document) refers to a document that describes protocols and data for communication between components consist of a system. Each component developer gathers at a specific place to conduct an integrated test for ESICD verification. In this case, it often happens that the integration test is delayed due to a simple mistake of software developers. There are two reasons for this situation: First, software developers do not perform sufficient verification because it is difficult to configure the system environment in a Lab, and second, they do not immediately find the cause of errors occurred during integration tests. Therefore, in this paper, we propose a strategy to effectively perform ESICD verification, which takes a lot of time between the production and implementation stage of the weapon system development stage and the system integration test stage.

• Corrosion Science and Technology
• /
• v.20 no.4
• /
• pp.183-188
• /
• 2021

The increasing demand for energy storage in mobile electronic devices and electric vehicles has emphasized the importance of electrochemical energy storage devices such as Li-ion batteries (LIBs) and supercapacitors. For reversible Li storage, alternative anode materials are actively being developed. In this study, we designed and fabricated an Nb₂O₅-Li₃VO₄ composite for use as an anode material in LIBs and hybrid supercapacitors. Nb₂O₅ powders were dissolved into a solution and the precursors were precipitated onto Li₃VO₄ through a simple, low-temperature hydrothermal reaction. The annealing process yielded an Nb₂O₅-Li₃VO₄ composite that was characterized by X-ray diffraction, electron microscopy, and X-ray photoelectron spectroscopy. Electrochemical tests revealed that the Nb₂O₅-Li₃VO₄ composite electrode demonstrated increased capacities of approximately 350 and 140 mAh g^-1 at 0.1 and 5 C, respectively, were maintained up to 1000 cycles. The reversible capacity and rate capability of the composite electrode were enhanced compared to those of pure Nb₂O₅-based electrodes. These results can be attributed to the microstructure design of the synthesized composite material.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.6
• /
• pp.411-423
• /
• 2020

To remove phosphorus from the effluent of public wastewater treatment facilities, hundreds of enhanced phosphorus treatment processes have been introduced nationwide. However, these processes have a few problems including excessive maintenance cost and sludge production caused by inappropriate coagulant injection. Therefore, the optimal decision of coagulant dosage and automatic control of coagulant injection are essential. To overcome the drawbacks of conventional phosphorus removal processes, the integrated sedimentation and dissolved air flotation(SeDAF) process has been developed and a demonstration plant(capacity: 100 ㎥/d) has also been installed. In this study, various jar-tests(sedimentation and / or sedimentation·flotation) and multiple regression analyses have been performed. Particularly, we have highlighted the decision-making algorithms of optimal coagulant dosage to improve the applicability of the SeDAF process. As a result, the sedimentation jar-test could be a simple and reliable method for the decision of appropriate coagulant dosage in field condition of the SeDAF process. And, we have found that the SeDAF process can save 30 - 40% of coagulant dosage compared with conventional sedimentation processes to achieve total phosphorus (T-P) concentration below 0.2 mg/L of treated water, and it can also reduce same portion of sludge production.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.529-537
• /
• 2021

Wind tunnel tests were carried out with a scramjet high speed vehicle. Since the scramjet engine does not have a compressor, it has a simple structure, but it is important to design the intake for the supersonic combustion in the combustion chamber. In this study, internal flow characteristics and the starting condition were analyzed by measuring the pressure at the isolator exit just before the combustion chamber, and the intake performance parameters were calculated and compared the result on every Mach number. The aerodynamic characteristics of the flow-through high speed vehicle were analyzed and internal drag correction is required to precisely analyze the aerodynamic characteristics. In this paper, an experimental technique using three probes for internal drag correction was proposed. By applying internal drag correction, it was able to figure out the effect of the internal flow on the aerodynamic force of the vehicle.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.103-111
• /
• 2021

Naju Seokdanggan, Treasure No. 49, was dismantled and reconstructed due to poor performance. During construction, the crack area was reinforced and the inclination was improved. It is necessary to analyze the stiffness changes before and after the reconstruction of these cultural properties, and to establish a database of related information. In addition, there is a need for research on a scientific non-destructive testing method capable of predicting or evaluating the reinforcing effect. In this study, a simple equation for estimating the overall stiffness of the structural system was derived from information on the elasticity coefficient and the natural frequency measured by vibration tests before and after reconstruction work, and the applicability of the equation was examined. If the stiffness of important cultural properties is regularly investigated by the suggested method, it is judged that it can be used as data to estimate the time when structural safety diagnosis is necessary or when repair or reinforcement is necessary.

• The korean journal of orthodontics
• /
• v.51 no.4
• /
• pp.282-292
• /
• 2021

Objective: To quantitatively analyze the effect of nicotine on orthodontic tooth movement (OTM) and bone remodeling in rats using micro-computed tomography and tartrate-resistant acid phosphatase immunostaining. Methods: Thirty-nine adult male Sprague-Dawley rats were randomized into three groups: group A, 0.5 mL normal saline (n = 9, 3 per 3, 7, and 14 days); group B, 0.83 mg/kg nicotine (n = 15, 5 per 3, 7, and 14 days); and group C, 1.67 mg/kg nicotine (n = 15, 5 per 3, 7, and 14 days). Each animal received daily intraperitoneal injections of nicotine/saline from the day of insertion of identical 30-g orthodontic force delivery systems. A 5-mm nickel-titanium closed-coil spring was applied between the left maxillary first molar (M1) and the two splinted incisors. The rate of OTM and volumetric bone changes were measured using micro-computed tomography. Osteoclasts were counted on the mesial alveolar bone surface of the distobuccal root of M1. Six dependent outcome variables, including the intermolar distance, bone volume fraction, bone mineral density, trabecular thickness, trabecular volume, and osteoclast number, were summarized using simple descriptive statistics. Nonparametric Kruskal-Wallis tests were used to evaluate differences among groups at 3, 7, and 14 days of OTM. Results: All six dependent outcome variables showed no statistically significant among group-differences at 3, 7, and 14 days. Conclusions: The findings of this study suggest that nicotine does not affect OTM and bone remodeling, although fluctuations during the different stages of OTM in the nicotine groups should be elucidated in further prospective studies.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.5
• /
• pp.5-13
• /
• 2022

In this study, dynamic characteristics and liquefaction resistance characteristics of silica sand which is used to simulate sandy layer were conducted using the cyclic triaxial test according to the relative density difference. The difference in liquefaction resistance with the relative density was confirmed through the test results, which the relative density conditions were changed to 40%, 60%, and 80%, and the cyclic resistance ratio (CRR) curve of the silica sand was obtained. In addition, in order to examine the validity of the liquefaction resistance ratio (CRR) curve, artificial silica sand ground was created, and liquefaction potential was evaluated through the simple assessment method and the detailed assessment method, and the safety factors of each were compared.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.2
• /
• pp.25-34
• /
• 2022

With the development of online services, the ripple effect of negative comments is increasing, and the damage of cyber violence is rising. Various methods such as filtering based on forbidden words and reporting systems prevent this, but it is challenging to eradicate negative comments. Therefore, this study aimed to increase the accuracy of the classification of negative comments using deep learning and blur the parts corresponding to profanity. Two different conditional training helped decide the number of deep learning layers and filters. The accuracy of 88% confirmed with 90% of the dataset for training and 10% for tests. In addition, Grad-CAM enabled us to find and blur the location of swear words in negative comments. Although the accuracy of classifying comments based on simple forbidden words was 56%, it was found that blurring negative comments through the deep learning model was more effective.