• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.2
• /
• pp.70-79
• /
• 2020

The offshore installation units may be subjected to various accidental loads such as collision from supply vessels, impact from dropped objects, blast load from gas explosion and thermal load from fire. This paper deals with the design and strength evaluation method of the stiffened plate structures in response to a blast load caused by a gas explosion accident. It is a comprehensive review of various items used in actual project such as the size and type of the explosive loads, general design procedure/concept and analysis method. The structural analyses using simple analysis methods based on SDOF model and nonlinear finite element analysis are applied to the particular FPSO project. Also validation studies on the design guidance given by simple analysis method based on SDOF model have also considered several items such as backpressure effects, material behavior and duration time of the overpressure. A good correlation between the prediction made by simple analysis method based on SDOF model and nonlinear finite element analysis can be generally obtained up to the elastic limit.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.261-264
• /
• 2001

In this paper, we introduce a simple design method f9r mot-squared type raised cosine filter with equiripple characteristics. Through some design examples, we show that the proposed filter has much better performance in ripple than the conventional SRCF at the expense of small increasing of ISI. In addition, the proposed Inter is compatible with conventional SRCF. Finally, we designs the filter for W-CDMPI which uses RRC (Root Raised Cosine) with a=0.22, in 12bit finite precision.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.6
• /
• pp.259-265
• /
• 2001

In the last two decades, many researchers proposed various usages of the orthogonal functions such as Walsh, Haar and BPF to solve the system analysis, optimal control, and identification problems from and algebraic form. In this paper, a simple procedure to design and algerbraic observer for the descriptor system is presented by using block pulse function expansions. The main characteristic of this technique is that it converts differential observer equation into an algerbraic equation. And furthermore, a simple recursive algorithm is proposed to obtain BPFs coefficients of the observer equation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1129-1134
• /
• 2006

In this paper, we analyze the cycle structure of punctured finite-length RA-type LDPC codes and design interleavers which have good memory efficiency and avoid short cycles. Furthermore, we introduce the check-node merging scheme for punctured finite-length RA-type LDPC codes and design simple interleavers. Simulation results show that punctured finite-length RA-type LDPC codes using the proposed simple interleavers have better performance than those with random and S-random interleavers.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.54.3-54
• /
• 2001

This paper presents a controller design technique for standard 2nd-order system satisfying user-specified phase margin. A simple method is presented to meet stability margin for the 2nd-order system, which is important since the 2nd-order plant models are frequently encountered in the practical plant models such as actuators of the optical drive systems. Through the comparison of the specified stability margin and achieved stability margin, it is shown in the simple example that the proposed technique is useful in the initial design of control systems with stability margin specifications.

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.39-46
• /
• 2011

Danish Modern has been recognized as simple and comfortable design movement that was matched with its unique regional environment. There are various internationally well known designers such as Arne Jacobsen, Verner Panton. Danish Modern movement and International style had vital role to activate these designers' ideas and design quality. This paper aims to study the background and design characteristics of Danish Modern movement as well as some of the spatial projects by Arne Jacobsen. Furniture design of Jacobsen were already throughly studied in various researches. However his spatial projects such as architectural buildings and interior designs were not. This study analyzes three major architectural projects based on the four characteristics of Danish Modern: Formal Simplicity, Simple Functionality, Regional Contextuality, Reasonable Amusement. After the case study, this study discovered that Danish Modern characteristics had unique roles in the design process of Jacobsen's projects. Danish Modern is still valid design philosophy that can be applied to contemporary society.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3357-3368
• /
• 1994

Total pressure losses required to calculate the total-to-total efficiency are estimated by integrating empirical loss coefficients of four loss mechanisms along the mean-line of blades as follows; blade profile loss, secondary flow loss, end wall loss and tip clearance loss. The off-design points are obtained on the basis of Howell's off-design performance of a compressor cascade. Also, inlet-outlet air angles and camber angle are obtained from semi-empirical relations of transonic airfoils' minimum loss incidence and deviation angles. And nominal point is replaced by the design point. It is concluded that relatively simple loss models and Howell's off-design data permit us to calculate the off-design performance with satisfactory accuracy. And this method can be easily extended for off-design performance prediction of multi-stage compressors.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.7 no.1
• /
• pp.1-6
• /
• 2007

In this study, we fill a person's shoes human knowledge use a computer fast and simple repetition in architecture design. this study are launched from a assumption that a optimized arrangement spaces are able to measure and gauge. but automatic space arrangement program is first step, we have a value that propose a differential cell space and valuation space and process of optimized space arrangement. the merits of this design process are as follows; 1. this program has a advantage high the building-to-land ratio land and business area in space design. 2.this program can design a economy building and calculate rent benefit and calculate cost of construction. 3. this program can adapt for digital GIS. this program can down cost in labor productivity. 5. a layman can design high level. the weak point of this design process are as follows; 1. the design product is simple box shape. 2. this program has a weak in large area and complicated land shape 3. complex use space design are difficult in this program.

• Journal of the Korea Furniture Society
• /
• v.25 no.1
• /
• pp.11-18
• /
• 2014

Beauty of balance, can be found in antique furniture of the Joseon Dynasty. Balance, give comfort and peace of mind to people. Even today, the balance in various fields, it is easily viewed, and an important one element indispensable in the design. Various lighting is an essential element of the interior to create an atmosphere of space. It is also useful in a variety of ways for beauty, emotional effect, such as the switching of visual atmosphere. This design was designed with the concept of balanced. In addition, I have applied a simple graphic appearance. To give the fun and tension while giving it a well-balanced when you meet the figure. The design of this study is nothing more than a single direction. It will be in the traveling direction of the future as a designer by using a simple structure and phenomena that appear in life, is given to the design without the feeling of rejection to the user.

• Structural Engineering and Mechanics
• /
• v.14 no.3
• /
• pp.307-330
• /
• 2002

This study aims at postulating a simple methodology for predicting the failure modes of monotonically loaded reinforced concrete beam-column joints. All the factors that affect the failure modes of joints are discussed in detail using an experimental database of monotonically loaded exterior beam-column joints. The relative contributions of the strut and truss mechanisms to joint shear strength are determined based on the test results. A simple design equation for the beam longitudinal reinforcement ratio for joints with low, medium and high amount of stirrups is developed. The factors influencing the failure modes of monotonically loaded exterior beam-column joints are investigated in detail. Design charts that predict the failure modes of exterior beam-column connections both with and without stirrups are developed. Experimental data are compared with the design charts. The results show that the simple methodology gives very accurate predictions of the failure modes.