• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1433-1440
• /
• 2016

• Kyungpook Mathematical Journal
• /
• v.49 no.2
• /
• pp.389-392
• /
• 2009

The purpose of this note is to improve several known results on GQ-injective rings. We investigate in this paper the von Neumann regularity of left GQ-injective rings. We give an answer a question of Ming in the positive. Actually it is proved that if R is a left GQ-injective ring whose simple singular left R-modules are GP-injective then R is a von Neumann regular ring.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.4
• /
• pp.324-331
• /
• 2007

This paper studies new estimation method for state of charge (SOC) of the hybrid electric vehicle lithium battery using sliding mode observer. A simple R-C Lithium battery modeling technique is established and the errors caused by simple modeling was compensated by the sliding mode observer. The structure of the sliding mode observer is simple, but it shows robust control property against modeling errors and uncertainties. The performance of the system has been verified by the UUDS test. The test results of the proposed observer system shows robust tracking performance under real driving environments.

• Nutrition Research and Practice
• /
• v.16 no.6
• /
• pp.745-754
• /
• 2022

BACKGROUND/OBJECTIVES: The incidence of cardiovascular diseases (CVDs) has increased worldwide. Although a low serum vitamin D level is known to be associated with the risk of CVD, the mechanism is not well understood yet. The aim of this study was to determine the relationship of serum 25-hydroxyvitamin D₃ (25[OH]D) with homocysteine and apolipoprotein B (ApoB). SUBJECTS/METHODS: Of 777 subjects recruited from one health promotion center for routine heath exam from January 2010 to December 2016, 518 subjects were included in this study. Serum 25(OH)D, serum homocysteine, and other metabolic parameters including ApoB were analyzed. Simple and partial correlations were carried out after adjustments. Simple linear regression analysis was used for precise correlation of parameters. Multivariate regression analysis was done to know which factor (serum homocysteine or ApoB) was more related to serum 25(OH)D after adjustments. Finally, logarithms of homocysteine concentrations according to tertiles of serum 25(OH)D were compared. RESULTS: After sex and age adjustments, serum 25(OH)D showed negative correlations with serum homocysteine (r' = -0.114) and ApoB (r' = -0.098). In simple linear regression analysis, serum 25(OH)D showed a significant negative correlation with ApoB (P = 0.035). However, in multivariate regression analysis, serum 25(OH)D was significantly associated with serum homocysteine after adjustments (P = 0.022). In addition, serum homocysteine concentration was significantly high in the lowest 25(OH)D group (P = 0.046). CONCLUSION: Serum 25(OH)D concentration showed a stronger negative association with serum homocysteine than with ApoB.

• The Korean Journal of Physiology and Pharmacology
• /
• v.10 no.4
• /
• pp.167-172
• /
• 2006

In the present study, we developed a simple method to predict the neuronal cell death in the mouse hippocampus and striatum following transient global forebrain ischemia by evaluating both cerebral blood flow and the plasticity of the posterior communicating artery (PcomA). Male C57BL/6 mice were anesthetized with halothane and subjected to bilateral occlusion of the common carotid artery (BCCAO) for 30 min. The regional cerebral blood flow (rCBF) was measured by laser Doppler flowmetry. The plasticity of PcomA was visualized by intravascular perfusion of India ink solution. When animals had the residual cortical microperfusion less than 15% as well as the smaller PcomA whose diameter was less than one third compared with that of basilar artery, neuronal damage in the hippocampal subfields including CA1, CA2, and CA4, and in the striatum was consistently observed. Especially, when mice met these two criteria, marked neuronal damage was observed in CA2 subfield of the hippocampus. In contrast, after transient BCCAO, neuronal damage was consistently produced in the striatum, dependent more on the degree of rCBF reduction than on the plasticity of PcomA. The present study provided simple and highly reproducible criteria to induce the neuronal cell death in the vulnerable mice brain areas including the hippocampus and striatum after transient global forebrain ischemia.

• Structural Engineering and Mechanics
• /
• v.57 no.5
• /
• pp.837-859
• /
• 2016

An efficient shear deformation theory is developed for wave propagation analysis of an infinite functionally graded plate in the presence of thermal environments. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations of the present theory is reduced, and hence, makes it simple to use. The thermal effects and temperature-dependent material properties are both taken into account. The temperature field is assumed to be a uniform distribution over the plate surface and varied in the thickness direction only. Material properties are assumed to be temperature-dependent, and graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The governing equations of the wave propagation in the functionally graded plate are derived by employing the Hamilton's principle and the physical neutral surface concept. There is no stretching.bending coupling effect in the neutral surface-based formulation, and consequently, the governing equations and boundary conditions of functionally graded plates based on neutral surface have the simple forms as those of isotropic plates. The analytic dispersion relation of the functionally graded plate is obtained by solving an eigenvalue problem. The effects of the volume fraction distributions and temperature on wave propagation of functionally graded plate are discussed in detail. It can be concluded that the present theory is not only accurate but also simple in predicting the wave propagation characteristics in the functionally graded plate. The results carried out can be used in the ultrasonic inspection techniques and structural health monitoring.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.235-240
• /
• 2001

This study was performed to compare the lead levels of 20 quality control standard samples(KOSHA:18-2000) and 72 field samples in lead-acid battery manufacturing plant between ICP and portable-XRF methods. 1. While the proficiencies of 20 quality control standard samples by ICP were 100%, those of analytic result values by XRF were 75%. 2. The correlation coefficient(r) between the reference values for quality control (REF) and the analytic result values by ICP (ICP) was 1.0(p<0.05), and simple linear regression equation and the coefficient(R2) were REF = -0.0009 + 1.016 ICP and 0.9997, respectively. 3. The correlation coefficient(r) between the analytic result values of quality control standard samples by ICP (ICP) and by XRF (XRF) was 0.975(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -0.0003 + 1.002 XRF and 0.950, respectively. 4. The correlation coefficient(r) between the analytic result values for lead samples of a lead-acid battery manufacturing plant by ICP (ICP) and by XRF (XRF) was 0.993(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -2.058 + 0.996 XRF and 0.987, respectively. 5. While the frequency distributions of XRF /ICP(Ratio) for each ICP concentration levels in a lead-acid battery manufacturing plant revealed high proportion in ratio range of 0.876-1.125 than in ration range of 1.126-1.375. Also, ICP concentration level in ration range of 0.786-1.125 was increased with increase of frequency distribution of XRF/ICP. 6. The limit of detection of XRF on lead was determined to be $6.11{\mu}g$/filter The data presented in this study indicated that relationship for lead level of quality control samples and field samples in a lead -acid battery manufacturing plant by ICP and portable-XRF methods was proved. The practicing industrial hygienist can use portable-XRF to produce a rapid on-site determination of lead exposure that can immediately becommunicated to workers and help identify appropriate levels of personal protection.

• Korean journal of applied entomology
• /
• v.50 no.4
• /
• pp.325-333
• /
• 2011

This study focused on the green peach aphid, Myzus persicae, as an indicator pest in Chinese cabbage cultivation to develop a genetic marker. We hypothesized that M. persicae gene flow is related to climate change. Genetic variation was analyzed using five local populations collected at different altitudes (157 m, 296 m, 560 m, 756 m and 932 m above sea level) in Hoengseong, Pyeongchang, and Gangneung areas, plus a laboratory strain used as an outgroup. There were no differences in ecological characteristics among strains. Esterase isozyme pattern and inter-simple sequence repeat (ISSR) PCR results showed significantly different bands between laboratory and wild, local populations. However, there was no difference among local populations. Partial fragments of ribosomal RNA (rRNA) and mitochondrial cytochrome oxidase I (mtCO I) were amplified and their nucleotide sequence was analyzed. Single nucleotide polymorphisms (SNPs) were detected in internal transcribed spacer-2 (ITS-2) and mtCO I regions among the five local populations. These SNPs can be use to discriminate different populations of M. persicae to monitor gene flow.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.140-148
• /
• 2000

A robust current control technique with a simple time delayed estimator for a permanent magnet synchronous m motor (PMSM) drive is presented. Among the various CWTent control schemes for a voltage source inverter-fed P PMSM drive, the predictive control is known to give a superior performance. This control technique, however, r requires the full knowledge of machine parameters and operating conditions, and gives an unsatisfactory r response under the parameter mismatch between the motor and controller. To overcome such a limitation, the d disturbances caused by the parameter valiations will be estimated by using a" time delay contTol approach and u used for the computation of the reference voltages by a simple feedforwal"d control. The proposed control $ scheme is implemented on a PMSM using the software of DSP TlVIS:32OC:30 and the effectiveness is verified d through the comparative simulations and experiments.periments.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.303-316
• /
• 1993

The purpose of this study was to analysis the stress distribution induced by three unit PFM bridges and various cantilever bridges replacing maxillary latersal incisor. The simplified two-dimensional photoelastic models used for this study was contructed in the folio- wing way. CR/R ratio was designed to be 1 : 1, 1 : 1.25 and 1 : 1.5. The pontics of cantilever bridge supported by maxillary canines consisted of wrap-around type, rest-extension type, and simple type. 3-unit PFM bridge was constructed with traditional method. 1kg vertical static load was applied on the center of the incisal edge of the pontic. The stress pattern was examined and recorded by photography. The results obtained were as follows ; 1. The magnitude of stress on the abutment root apex area of a traditional 3-unit bridge was the lowest. 2. The model of cantilevered pontic with a rest showed the relatively well distributed stress around the abutment tooth. The model with simple pontic generated the greatest stress concentration in the supporting structure of the abutment tooth. 3. As the height of bone level reduced, the rotational and vertical force increased around the abutment tooth. 4. The stress concentration of the 3-unit bridges occured on the root apex and stress concentration of the cantilever briage occured on the root apex and cervix area, 5. In the case of the cantilever bridge, stress concentrated distally on the root apex area of the abutment tooth and additional stress was observed mesially on the upper part of the root. Especially in the case of the simple pontic, was phenomenon was more apparent than the others. 6. Force applied to cantilevered pontic was transmitted to the adjacent central incisor through the contact surface. Stress was markedly observed on the mesial cervix area in the case of simple pontic and on the root apex area in the case of wrap-around type and rest-extension type.