• Korean Journal of Materials Research
• /
• v.16 no.4
• /
• pp.272-275
• /
• 2006

In order to evaluate the possibility of Polymethyl methacrylate (PMMA) as a binder on hydroxyapatite (HAp) which has good biocompatibility, the properties of HAp compacts with PMMA were examined. When adding 50 wt% of PMMA on HAp and pressed, the compression strength and the hardness of the compacting body were 168MPa and 55 Hv, respectively, and the strength of compacts was higher than that of cortical bone and the hardness was similar to the value of molar. We demonstrated that HAp ceramics can be obtained without additional heat treatment and machining of the ceramic was feasible. Therefore, the HAp compacts have potential to apply to implant or artificial bone after the clinical trials guarantees biocompatibility of it.

• Agricultural and Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-14
• /
• 2001

A rice mill plant with a capacity of 3 t/h was constructed with automated facilities at Chonnam National University. A simulation model was developed with SLAMSYSTEM for evaluation and improving the rice mill process. The developed model was validated in the views of hulling efficiency, milling efficiency, milled rice recovery, other materials produced, at bottlenecks in the processes. The results of hulling efficiency, milling efficiency, milled rice recovery in the simulation were, respectively, 81.1%, 89,5%, and 73.1%, while those of the actual mill plant were 81.5%, 90.2%, and 73.5%. The simulation results including the rates of other materials(chaff, bran, broken rice, stone, etc) produced in the processes were almost similar with those of the actual process. In the simulation the bottlenecks were found out in the process for separating brown rice and sorting colored rice. These phenomena also appeared in the actual process. It needed to increase the hourly capacities of the brown rice separator and the rice color sorter. As the developed model could well express the automated rice mill plant, it could be used for designing and improving rice mill plants.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.285-291
• /
• 2015

In this paper, a composite material analysis program based on the finite element method(FEM) is used. The purpose of this study was to verify whether the composite material analysis program which developed as part of a project of development of softwares and educational contents for structural vibration and composite material analysis that can calculate how similar the macroscopic mechanical behavior of the composite materials actually. Because composite materials are generally anisotropic, analysis of composite laminate is used for the constitutive equations of orthotropic material. For convenience, the unit is ommited in all calculations. To verify the accuracy of the finite element method based program, the deflection and stress distribution of the simply supported composite material laminated plate subjected to a uniform load distribution is compared with exact solution. Size and properties of the composite material laminate used for analysis are fixed variables, and by changing the number of elements and the total thickness of the laminate is compared with the exact solution to the resulting value, respectively.

• Hwankyungkyoyuk
• /
• v.17 no.1
• /
• pp.43-56
• /
• 2004

The purpose of environmental education is to cultivate democracy citizens suitable for sustainable society. Suitable citizens for sustainable society are fostered person of environmental literacy, environmental sensibility, ecological and synthetic sights of environmental problems, decision making of environmental problems, and environmental responsibility etc. by environmental education. To achieve this purpose of environmental education effectively, it is desirable that produces and utilizes ICT(Information and Communication Technologies) works and methods that can show efficiently special sides(inter-relation, long-term effects etc.) of environmental problems. ICT environmental education materials and methods are raising the interest and participate of teenagers to environmental education because they are accustomed to the Internet in South Korea. Students can easily conversation with the person of similar interests and environment experts through cyber ICT environmental education. The directions of developing ICT teaching materials for environmental education to enforce self-directed learning, cooperation studying etc.

• International Journal of Railway
• /
• v.6 no.2
• /
• pp.53-58
• /
• 2013

In this study, cyclic triaxial tests were carried out with the coarse granular materials used in Korean railway infrastructure (reinforced trackbed, gravel of transition zone, upper subgrade of railway) and Young's modulus for the target materials in small strain level were suggested. And the result of elastic modulus suggested in this study is expected to be effectively applied to dynamic analysis of the railway embankment structure using similar material, since the grain size distributions and unit weight of the material tested in this study are specified in Korean Railway Design Criteria.

• Membrane Journal
• /
• v.13 no.1
• /
• pp.29-36
• /
• 2003

A characterization of the permeation and separation using single salt solution was carried out with charged composite membranes. Various charged composite membranes were fabricated by blending an ionic polymer with a nonionic polymer in different ratios. In this study, sodium alginate, chitosan and poly(vinyl alcohol) were employed as anionic, cationic and nonionic polymers, respectively. The permeation and separation behaviors of the aqueous salt solutions have been investigated through the charged composite membranes with various charge densities. As the content of the ionic polymer increased in the membrane, the hydrophilicity of the membrane increased, and pure water flux and the solution flux increased correspondingly, indicating that the permeation performance through the membrane is determined mainly by its hydrophilicity. Electrostatic interaction between the charged membrane and ionic solute molecules, that is, Donnan exclusion, was observed to be attributed to salt rejection to a greater extent, and molecular sieve mechanism was effective for the separation of salts under a similar electrostatic circumstance of solutes.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.652-656
• /
• 2007

Hydroxyapatite [Ca10(PO4)6(OH)2, HAp] and titanium(Ti) metal are known to be excellent materials with high affinities for natural bone through the apatite. Tricalcium phosphate [Ca3(PO4)2, TCP] is a promising alternative material because it is similar to HAp in its physical properties and biocompatibility. To examine the influence of hydroxyapatite, tricalcium phosphate, pure titanium and pre-treated titanium on osteopontin expression in osteoblasts, RNA was extracted from proliferated and cultured osteoblast cells and OPN mRNA expression was observed by RT-PCR.

• Korean Journal of Materials Research
• /
• v.25 no.7
• /
• pp.352-357
• /
• 2015

To research the characteristics of ITO film depending on a polarity of SiOC, specimens of ITO/SiOC/glass with metal-insulator-substrates (MIS) were prepared using a sputtering system. SiOC film with 17 sccm of oxygen flow rate became a non-polarity with low surface energy. The PL spectra of the ITO films deposited with various argon flow rates on SiOC film as non-polarity were found to lead to similar formations. However, the PL spectra of ITO deposited with various argon flow rates on SiOC with polarity were seen to have various features owing to the chemical reaction between ITO and the polar sites of SiOC. Most ITO/SiOC films non-linearly showed the Schottky contacts and current increased. But the ITO/SiOC film with a low current demonstrated an Ohmic contact.

• Korean Journal of Materials Research
• /
• v.25 no.7
• /
• pp.347-351
• /
• 2015

To study the characteristics of ZTO, which is made using a target mixed $ZnO:SnO_2=1:1$, the ZnO and $SnO_2$ were analyzed using PL, XRD patterns, and electrical properties. Resulting characteristics were compared with the electrical characteristics of ZnO, $SnO_2$, and ZTO. The electrical characteristics of ZTO were found to improve with increasing of the annealing temperature due to the high degree of crystal structures at high temperature. The crystal structure of $SnO_2$ was also found to increase with increasing temperatures. So, the structure of ZTO was found to be affected by the annealing temperature and the molecules of $SnO_2$; the optical property of ZTO was similar to that of ZnO. Among the ZTO films, ZTO annealed at the highest temperature showed the highest capacitance and Schottky contact.

• Journal of Surface Science and Engineering
• /
• v.19 no.4
• /
• pp.133-139
• /
• 1986

The effects of alternating voltage, $Cl^-$ ion and pH on the corrosion of Zn and Zn-Fe alloys have been investigated by using electrochemical techniques in $Ca(OH)_2$ solutions. The passive film $Zn(OH)_2$ was initially formed on the Zn surface and gradually transformed to $Ca(Zn(OH)_3)_2{\cdot}2H_2O$, which was identified with the X-ray diffraction method, SEM micrograph and EPMA. The passivity current increased with increasing alternating voltage and decrease AC frequency. ${\xi}$ phase in Zn-Fe alloys reduced the effects of AC. The effect of $Cl^-$ ion on the passivity current of Zn was similar to the AC effect, resulting in pits on Zn. It was also found that the passive region of Zn decreased rapidly below pH 10.3 of the solution.