• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.300-305
• /
• 2005

As the current level of birth rate of Korea has dramatically declined, it is obvious that pediatric dentistry will also be affected by this change. This study was performed for the purpose of understanding on the current fertility levels of Korea. The formal data on the number of live births(NLB), crude birth rate(CBR), and total fertility rate(TFR) published annually from the National Statistical Office of Korea from 1992 to 2000 were used as materials for this study. The TFR values from 1990 to 2002 of Korea were compared with those of some western countries with similar history of decreased birth and the CBR values of the metropolitan cities and the capital city Seoul in 2003 were compared domestically, yielding to results as follows. 1. Recent birth rate of Korea was decreased continuously. NLB was about 490,000 CBR was 10.2 and TFR was 1.19. 2. TFR of Korea in 2002 was 1.17, the lowest in the world. 3. There was a large difference in the NLB and CBR between local prefectures and towns of Seoul domestically. Additional population studies and medico-economical studies to exactly predict the demands of pediatric dentistry and proper supplies of manpower in the future was thought urgently required.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.280-289
• /
• 2004

Adequate polymerization is a crucial factor in obtaining optimal physical properties and clinical performance of resin composite restorative materials. The purpose of this study was to determine the effectiveness of shade and depth on dental composite resin polymerized with plasma arc curing unit employing FTIR and microhardness. From this experiment, the following results were obtained : 1. The light transmission and microhardness by mode 6 in plasma arc curing were similar to by 20 secs in halogen light curing. 2. The experimental groups of A1, A2, A3, A3.5 were not signifcant difference to light transmission and microhardness on surface and 2mm depth, but were significant difference on 3mm and 4mm depth. Especially light transmission and microhardness were small in darker shade and deeper thickness. 3. Compared with depth cure, uncured monomer amount increased at more than 2mm depth. 4. The light transmission by FTIR and polymerization by microhardness were significant corelation.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.179-189
• /
• 2016

This study investigated the quality characteristics of cookies containing Aronia powder, which is well known for its various functions and biological activity. In this study, we assessed the quality characteristics and antioxidant activity of cookies containing various concentrations (0, 2, 4, 6 and 8%) of Aronia powder(AP). To analyze quality characteristics, pH of dough, moisture content, color(L, a, b), hardness, and sensory properties were measured. Qualities, such as moisture content, redness and yellowness and hardness increased significantly (p<0.001). whereas pH and lightness of the cookies significantly decreased (p<0.001). The antioxidant activity measured by DPPH and ABTS radical scavenging activities were significantly higher than the control, and it proportionally increased as the amount of AP increased (p<0.001). The results of sensory properties showed that cookies made with 2% and 4% AP did not differ significantly from the control in color, taste, and overall quality. Texture scores for the 2% and 4% AP groups ranked significantly higher than those of the other groups. Taken together, the results of this study suggest that AP is a beneficial ingredient for increasing the consumer acceptability and functionality of cookies. The quality characteristics of the 4% added samples exhibited significantly similar or higher values as compared to those of the controls, raising the possibility of developments in health-functional cookies. The results of the sensory evaluation produced very significant values for color, appearance, texture, and overall quality of instrumental analysis.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.102-111
• /
• 2014

Purpose: Surface damage and bonding strength difference after micromechanical treatment of zirconia surface are to be studied yet. The aim of this study was to evaluate the difference of fracture resistance and bonding strength between more surface-damaged group from higher air-blasting particle size and pressure, and less damaged group. Materials and Methods: Disk shape zirconia ($LAVA^{TM}$) was sintered and air-blasted with $30{\mu}m$ particle size (Cojet), under 2.8 bar for 15 seconds, $110{\mu}m$ particle size (Rocatec), under 2.8 bar for 15 seconds, and $110{\mu}m$ particle size (Rocatec), under 3.8 bar for 30 seconds respectively. Biaxial flexure test and bonding failure load test were performed serially (n = 10 per group). For bonding test, specimens were bonded on the base material having similar modulus of elasticity of dentin with $200{\mu}m$-thick resin cement for tension of surface damage. Failure load of bonding was detected with acoustic emission (AE) sensor. Results: There were no significant differences both in the biaxial flexure test and bonding failure load test between groups (P > 0.05). Sub-surface cracks were all radial cracks except for two specimens. Conclusion: Within the limitations of no aging under monotonic load test, surface damage from higher air-blasting particle size and pressure was not significant. Evaluations of failure load with bonded zirconia disks was clinically relevant modality for surface damage and bonding strength, simultaneously.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.131-137
• /
• 2014

Purpose: This study examined the efficiency and wear of periodontal instrument sharpening using aluminum oxide stones with different levels of roughness. Materials and Methods: Thirty new No. 9-10 Gracey curets were used in this study. All curets had become dull after scaling and root planing. After similar blunting, the instruments were divided randomly into three groups (240, 600, 800 grit) containing 10 curets each. The stones were applied correctly to the lateral surface of each curet to maintain the $70-80^{\circ}$ angle. After resharpening, sharpness of the curets was examined by an optical microscope. After 20, 40, 60, and 80 strokes, the wear was measured at 1 mm and 2 mm from the tip of the cutting edge using a digital caliper. The data was analyzed statistically using analysis of variance (ANOVA) with repeated measures, 2-way ANOVA, and a Fisher's exact test. Results: The degree of sharpness increased significantly (P < 0.001) as the number of sharpening strokes grew for all stones. A comparison of the degree of sharpness on the same number of strokes showed that the 240 grit group significantly excelled the other groups on 5 and 10 strokes, respectively (P < 0.001). The mean wear showed no statistically significant difference among the groups (P > 0.05). Conclusion: The efficiency of Gracey curet resharpening was enhanced with more coarse stones, though we should consider the wear of the instrument during resharpening.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.2
• /
• pp.101-112
• /
• 2002

Background : Toluene diisocyanate(TDI) is a leading cause of occupational asthma. However, the pathogenesis of TDI-induced asthma is largely unknown because there is no suitable animal model. Materials and Methods : We developed a murine model of TDI-induced asthma by performing two sensitization with 3% TDI and one challenge with 1% TDI using ultrasonic nebulization. Results : Similar to occupational asthma in humans, murine TDI-induced asthma includes findings 1) increased inflammatory cells, including neutrophils and eosinophils, 2) histologic changes, including infiltration of inflammatory cells around bronchioles, thickened airway epithelium, contraction of bronchioles, and accumulation of mucus and debris in the bronchioles, 3) increased MMP-9 activity in inflammatory cells in the airway lumen, 4) airway hyperrespnosiveness. Administraion of an MMP inhibitor, MMPI-I, remarkably reduced all these pathophysiological findings. Conclusion : Therefore, we conclude that TDI-induced occupational asthma is associated with the induction of MMP-9 in inflammatory cells, and the inhibition of MMP-9 may be a good therapeutic strategy.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.81-87
• /
• 2014

Flow characteristics and the operating range of gas velocity was investigated for a two-stage bubbling fluidized-bed (0.1 m-i.d., 1.2 m-high) that had continuous solids feed and discharge. Solids were fed in to the upper fluidized-bed and overflowed into the bed section of the lower fluidized-bed through a standpipe (0.025 m-i.d.). The standpipe was simply a dense solids bed with no mechanical or non-mechanical valves. The solids overflowed the lower bed for discharge. The fluidizing gas was fed to the lower fluidized-bed and the exit gas was also used to fluidize the upper bed. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3090kg/m^3$ in apparent density) and fine (< $100{\mu}m$ in diameter and $4400kg/m^3$ in apparent density) particles were used as bed materials. The proportion of fine particles was employed as the experimental variable. The gas velocity of the lower fluidized-bed was defined as collapse velocity in the condition that the standpipe was emptied by upflow gas bypassing from the lower fluidized-bed. It could be used as the maximum operating velocity of the present process. The collapse velocity decreased after an initial increase as the proportion of fine particles increased. The maximum took place at the proportion of fine particles 30%. The trend of the collapse velocity was similar with that of standpipe pressure drop. The collapse velocity was expressed as a function of bulk density of particles and voidage of static bed. It increased with an increase of bulk density, however, decreased with an increase of voidage of static bed.

• The Korea Journal of Herbology
• /
• v.26 no.3
• /
• pp.37-45
• /
• 2011

Objectives : This study focused on Schisandrae Fructus (SF) and Perilae Folium (PF), traditional medicine herbs and health functional food in Korea, Japan and China. We investigated various pharmacological activities that include a potential source of free radical scavenging, anti-viral, anti-microbial, anti-allergy and anti-inflammatory activities. Methods : We conducted an investigation of total contents of phenolic and flavonoid compounds in these single herbal extraction with/without combined to mixture. We also measured antioxidant activities such as DPPH free radical scavenging, SOD-like scavenging, nitrite scavenging and hydroxyl radical scavenging activities, xanthine oxidase inhibition, linoleic acid peroxidation inhibition, and reducing power. Results : As the results, contents of total phenoilc compounds and flavonoids were higher in those of PF than those of SF. Those of SF+PF mixture showed the synergy effects compared with those of SF and PF single extractions. Activities of DPPH free radical and SOD-like scavenging in 1 mg/mL concentration increased in dose dependent manners. That of SF increased compared with that of PF. That of SF and PF mixture also increased compared with that of BHA as a positive control. The other antioxident activities also showed similar to patten of activity of DPPH free radical scavenging. When combined to SF and PF extractions, there was showed synergic effect compared with those of BHA, excepted activities of xanthine oxidase inhibition and reducing power. Taken together, SF and PF have high phenolic and flavonoid compounds content furthermore, antioxidant activities in SF and PF mixture showed more synergy effect compared with those of BHA. Conclusions : Therefore, these findings suggest that SF and PF mixture may offer functional materials potential for development of functional beverage. But further studies are needed for the identification of the active compounds.

• Applied Microscopy
• /
• v.2 no.1
• /
• pp.39-46
• /
• 1972

There are many kinds of microscopes suitable for general studies; optical microscopes(OM), conventional transmission electron microscopes (TEM), and scanning electron microscopes(SEM). The optical microscopes and the conventional transmission electron microscopes are very familiar. The images of these microscopes are directly formed on an image plane with one or more image forming lenses. On the other hand, the image of the scanning electron microscope is formed on a fluorescent screen of a cathode ray tube using a scanning system similar to television technique. In this paper, the features and some applications of the scanning electron microscope will be discussed briefly. The recently available scanning electron microscope, combining a resolution of about $200{\AA}$ with great depth of field, is favorable when compared to the replica technique. It avoids the problem of specimen damage and the introduction of artifacts. In addition, it permits the examination of many samples that can not be replicated, and provides a broader range of information. The scanning electron microscope has found application in diverse fields of study including biology, chemistry, materials science, semiconductor technology, and many others. In scanning electron microscopy, the secondary electron method. the backscattererd electron method, and the electromotive force method are most widely used, and the transmitted electron method will become more useful. Change-over of magnification can be easily done by controlling the scanning width of the electron probe. It is possible. to continuously vary the magnification over the range from 100 times to 1.00,000 times without readjustment of focusing. Conclusion: With the development of a scanning. electron microscope, it is now possible to observe almost all-information produced through interactions between substances and electrons in the form of image. When the probe is properly focused on the specimen, changing magnification of specimen orientation does not require any change in focus. This is quite different from the conventional transmission electron microscope. It is worthwhile to note that the typical probe currents of $10^{-10}$ to $10^{-12}\;{\AA}$ are for below the $10^{-5}$ to $10^{-7}\;{\AA}$ of a conventional. transmission microscope. This reduces specimen contamination and specimen damage due to heatings. Outstanding features of the scanning electron microscope include the 'stereoscopic observation of a bulky or fiber specimen in high resolution' and 'observation of potential distribution and electromotive force in semiconductor devices'.

• The Korean Journal of Malacology
• /
• v.31 no.1
• /
• pp.35-41
• /
• 2015

In order to investigate the live food value of microalgae for efficacious rearing of larvae and spats of bivalve, we studied growth rates of four microalgal species (Isochrysis galbana, Pavlova lutheri, Chaetoceros simplex, Tetraselmis tetrathele) cultured in different environmental conditions. These include changes in temperatures (20, 25, 30 and $35^{\circ}C$), salinities (20, 25, 30 and 33 psu) and light intensities (60, 100 and $140{\mu}mol\;m^{-2}s^{-1}$). The growth rate of I. galbana was faster at $25^{\circ}C$ than that of $20^{\circ}C$. At $25^{\circ}C$ the highest growth rate of I. galbana was observed at 33 psu (0.413) and the lowest at 20 psu (0.368) in 10 days of culture (P < 0.05). The growth rate of I. galbana was lower at 25 psu (0.383) than that of 30 psu and higher than that of 20 psu (P < 0.05). Similar temperature and salinity-dependent changes were also found in P. lutheri and T. tetrathele. C. simplex showed faster growth rate at $30^{\circ}C$ than that of $25^{\circ}C$. The highest growth rate of C. simplex was observed at 33 psu (0.428) and the lowest at 20 psu (0.389) in 10 days of culture (P < 0.05). Upon exposure to the light with different intensities, all four microalgal species showed a significantly faster growth rate at $140{\mu}mol\;m^{-2}s^{-1}$ than at $100{\mu}mol\;m^{-2}s^{-1}$ (P < 0.05).