• Journal of the Korean Ceramic Society
• /
• v.47 no.4
• /
• pp.308-311
• /
• 2010

Porous SiC samples were prepared with three types of wood (poplar, pine, big cone pine) by simply embedding the wood charcoal in a powder mixture of Si and $SiO_2$ at 1600 and $1700^{\circ}C$. The basic engineering properties such as density, porosity, pore size and distribution, and strength were characterized. The samples showed full conversion to mostly $\beta$-SiC with good retention of the cellular structure of the original wood. More rigid SiC struts were developed for $1700^{\circ}C$. They showed similar bulk density ($0.5{\sim}0.6\;g/cm^3$) and porosity (81~84%) irrespective of the type of wood. The poplar sample showed three pore sizes (1, 8, $60\;{\mu}m$) with a main size of $60\;{\mu}m$. The pine sample showed a single pore size ($20\;{\mu}m$). The big cone pine sample showed two pore sizes (10, $80\;{\mu}m$) with a main size of $10\;{\mu}m$. The bend strength was 2.5 MPa for poplar, 5.7 MPa for pine, 2.8 MPa for big cone pine, indicating higher strength with pine.

• Journal of the Korean Ceramic Society
• /
• v.56 no.4
• /
• pp.374-386
• /
• 2019

A process for nitrogen doping of TiO₂ ceramics was developed, whereby polycrystalline titania particles were prepared at 450-1000℃ with variation of the firing schedule under N₂ atmosphere. The effect of nitrogen doping on the polycrystallites was investigated by X-ray diffraction (XRD) and Raman analysis. The microstructure of the TiO₂ ceramics changed with variation of the firing temperature and the firing atmosphere (N₂ or O₂). The microstructural changes in the nitrogen-doped TiO₂ ceramics were closely related to changes in the Raman spectra. Within the evaluated temperature range, the nitrogen-doped titania ceramics comprised anatase and/or rutile phases, similar to those of titania ceramics fired in air. Infiltration of nitrogen gas into the titania ceramics was analyzed by Raman spectroscopy and XRD analysis, showing a considerable change in the profiles of the N₂-doped TiO₂ ceramics compared with those of the TiO₂ ceramics fired under O₂ atmosphere. The nitrogen doping in the anatase phase may produce active sites for photocatalysis in the visible and ultraviolet regions.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.61-66
• /
• 2006

Titanium alloys have been used for dental materials due to it's very good biocompatibility. Ti-6Al-4V alloy instead of pure titanium is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. But it has been reported recently that the vanadium element expresses cytotoxicity and carcinogenicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. The Ti-Nb alloys has designed and examined corrosion resistance. Ti-3wt.%Nb($\alpha$type), Ti-20wt.%Nb(${\alpha}+{\beta}$type) and Ti-40wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. The corrosion resistance of Ti alloys was evaluated by potentiodynamic polarization test in the solution of 0.9% NaCl and 5% HCl. The results can be summarized as follows: 1) For the corrosion test in the solution of 0.9% NaCl and 5% HCl, the corrosion behaviour of Ti-Nb alloys was similar to ASTM grade 2 CP Ti. 2) The corrosion resistance of Ti-20Nb alloy was better than that of CP-Ti, Ti-3Nb, Ti-40Nb alloy in 0.9% NaCl and 5% HCl, solutions.

• Journal of Korean Elementary Science Education
• /
• v.19 no.1
• /
• pp.57-69
• /
• 2000

The purpose of this study was to seek desirable direction of science teaching and to present meaningful ideas for implementing the science curriculum and teaching materials by measuring the degree of the students' understandings on science and comparing it with those of American students. The researcher comprised 790 primary and middle school students for the study and administered them questionnaires developed by Trowbridge, Bybee, and Sund. The questionnaires were analyzed along with three categories such as science method, science theory, and the achievement of scientists. The researcher used t-test and ANOVA in order to compare the difference of their understandings in accordance with grades and gender, and later compared Korean students' understandings with those of similar aged American students administered by the National Assessment of Educational Progress (NAEP) The research loathed to the overall conclusions as follows; Both primary and middle school students' understandings on science revealed positive and appeared no significant difference in gender. And it is thought that science education was being carried out hopefully to enhancing Korean students' scientific literacy, therefore, science teaching like what is implemented to the classrooms currently should be kept on in future. On the other hand, it is necessary to change primary school children's understandings on attitude and value of scientists while to change middle school students' understandings on scientific processes by experiment. Also primary school children need to understand that scientists are willing to change their ideas when new information becomes known.

• Korean Journal of Health Education and Promotion
• /
• v.29 no.5
• /
• pp.49-59
• /
• 2012

Objectives: Physical activity provides economic benefits and contributes in improving health and quality of life. Opportunities for physical activity continue to decrease with the increasing prevalence of sedentary lifestyles. In various settings, there have been many efforts to enhance physical activity to prevent chronic disease for people of all ages. This study was performed to define competencies of physical activity specialists in health promotion and compare with those of health education specialists. Methods: The study employed official data and manuals of health promotion programs that have been published and uploaded on public websites. Results: Competencies for physical activity in health promotion included needs assessment, analysis of data and scientific information, planning and evaluation, developing strategies and materials, management, building healthy environment, research. To compare with the competency of health education specialists, competencies of physical activity were almost similar to that except the developing individual-based physical activity program in exercise science. Conclusions: Physical activity programs for health promotion should be planned and implemented throughout various health topics and in coordination with multiple sectors. To increase efficiency of the utilization of human resources in health promotion, health education specialists needs to participate in physical activity programs and would require empowerment in exercise science.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.593-601
• /
• 2017

Carbon Fiber Reinforced Polymer (CFRP) is one of the materials used to strengthen steel structures. Most studies on strengthening steel structures have been done on steel beams and steel columns. No independent study, to the researcher's knowledge, has studied the effect of CFRP strengthening on steel beam-columns, and it seems that there is a lack of understanding on behavior of CFRP strengthening on steel beam-columns. However, this study explored the use of adhesively bonded CFRP flexible sheets on retrofitting square hollow section (SHS) steel beam-columns, using numerical investigations. Finite Element Method (FEM) was employed for modeling. To determine the ultimate load of SHS steel beam-columns, ten specimens, eight of which were strengthened with the different coverage length and with one and two CFRP layers, with two types of section (Type A and B) were analyzed. ANSYS was used to analyze the SHS steel beam-columns. The results showed that the CFRP composite had no similar effect on the slender and stocky SHS steel beam-columns. The results also showed that the coverage length, the number of layers, and the location of CFRP composites were effective in increasing the ultimate load of the SHS steel beam-columns.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.347-352
• /
• 2016

Background: This study used receiver operating characteristic curve to analyze Surveillance, Epidemiology and End Results (SEER) adenosquamous carcinoma data to identify predictive models and potential disparities in outcome. Materials and Methods: This study analyzed socio-economic, staging and treatment factors available in the SEER database for adenosquamous carcinoma. For the risk modeling, each factor was fitted by a generalized linear model to predict the cause specific survival. An area under the receiver operating characteristic curve (ROC) was computed. Similar strata were combined to construct the most parsimonious models. Results: A total of 20,712 patients diagnosed from 1973 to 2009 were included in this study. The mean follow up time (S.D.) was 54.2 (78.4) months. Some 2/3 of the patients were female. The mean (S.D.) age was 63 (13.8) years. SEER stage was the most predictive factor of outcome (ROC area of 0.71). 13.9% of the patients were un-staged and had risk of cause specific death of 61.3% that was higher than the 45.3% risk for the regional disease and lower than the 70.3% for metastatic disease. Sex, site, radiotherapy, and surgery had ROC areas of about 0.55-0.65. Rural residence and race contributed to socioeconomic disparity for treatment outcome. Radiotherapy was underused even with localized and regional stages when the intent was curative. This under use was most pronounced in older patients. Conclusions: Anatomic stage was predictive and useful in treatment selection. Under-staging may have contributed to poor outcome.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.353-356
• /
• 2016

Background: This study used receiver operating characteristic curve to analyze Surveillance, Epidemiology and End Results (SEER) for glassy cell carcinoma data to identify predictive models and potential disparities in outcome. Materials and Methods: This study analyzed socio-economic, staging and treatment factors. For risk modeling, each factor was fitted by a generalized linear model to predict the cause specific survival. Area under the receiver operating characteristic curves (ROCs) were computed. Similar strata were combined to construct the most parsimonious models. A random sampling algorithm was used to estimate modeling errors. Risk of glassy cell carcinoma death was computed for the predictors for comparison. Results: There were 79 patients included in this study. The mean follow up time (S.D.) was 37 (32.8) months. Female patients outnumbered males 4:1. The mean (S.D.) age was 54.4 (19.8) years. SEER stage was the most predictive factor of outcome (ROC area of 0.69). The risks of cause specific death were, respectively, 9.4% for localized, 16.7% for regional, 35% for the un-staged/others category, and 60% for distant disease. After optimization, separation between the regional and unstaged/others category was removed with a higher ROC area of 0.72. Several socio-economic factors had small but measurable effects on outcome. Radiotherapy had not been used in 90% of patients with regional disease. Conclusions: Optimized SEER stage was predictive and useful in treatment selection. Underuse of radiotherapy may have contributed to poor outcome.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6005-6008
• /
• 2014

Aim: To compare recurrence rates of large loop excision of the transformation zone (LLETZ) with those of contour-loop excision of the transformation zone (C-LETZ) in the management of cervical intraepithelial neoplasia (CIN). Materials and Methods: The medical records of 177 patients treated consecutively by LLETZ and C-LETZ for CIN at Rajavithi Hospital between 2006 and 2009 were retrospectively reviewed. Results: Of the 87 women in the C-LETZ group, 2 cases (2.30%) had recurrence compared with 13 cases (14.4%) of the 90 women in the LLETZ group, the higher recurrence rate in the latter being statistically significant (p<0.05). Median times of follow up in the C-LETZ and LLETZ groups were 12 months and 14 months respectively (p>0.05). The C-LETZ group showed less intraoperative bleeding compared to the LLETZ group, but the rate of achievement of single specimens and positive margins were similar in the two groups. Conclusions: The present study demonstrated the superiority of C-LETZ over LLETZ in terms of efficacy; C-LLETZ is associated with a lower recurrence rate and also carries a smaller risk of intraoperative bleeding than LLETZ. The rotating technique still has a potential role in treating precancerous lesions of the cervix.

• Membrane and Water Treatment
• /
• v.9 no.3
• /
• pp.189-194
• /
• 2018

Electrochemical reduction of nitrate was studied using Zn, Cu and (Ir+Ru)-Ti cathodes and Pt/Ti anode in a cell divided by an ion exchange membrane. During electrolysis, effects of the different cathode types on operating parameters (i.e., voltage, temperature and pH), nitrate removal efficiency and by-products (i.e., nitrite and ammonia) formation were investigated. Ammonia oxidation rate in the presence of NaCl was also determined using the different ratios of hypochlorous acid to ammonia. The operating parameter values were similar for all types of cathode materials and were maintained relatively constant. Nitrate was well reduced and converted mostly to ammonia using Zn and Cu cathodes. Ammonia, produced as a by-product of nitrate reduction, was oxidized in the presence of NaCl in the electrochemical process and the oxidation performance was enhanced upon increasing the hypochlorous acid-to-ammonia ratio to 1.09:1. Zn and Cu cathodes promoted the nitrate reduction to ammonia and the produced ammonia was finally removed from solution by reacting with hypochlorite ions. Using Zn or Cu cathodes, instead of noble metal cathodes, in the electrochemical process can be an alternative technology for nitrate-containing wastewater treatment.