• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.8-13
• /
• 2007

To overcome drawbacks of the nylon 6/poly (acrylonitrile-co-butadiene-co-styrene) (ABS) blend, nylon 6 blend with poly (acrylonitrile - co-styrene - co-acrylic rubber) (ASA) which containing poly (butyl acrylate) as a rubber phase in substitute of poly (butadiene) in ABS, was examined. Poly (styrene-co-maleic anhydride) (SMA) containing 25 wt% of maleic anhydride (MA) or poly (styrene- co-acrylo-nitrile-co-maleic anhydride) (SANMA) containing less than 3 wt% MA was used as a compatibilizer to fabricate blends having high impact strength. Changes in the mechanical properties of nylon 6/ASA blend with compatibilizer content were similar with those of nylon 6/ABS blend. Blends haying high impact strength was produced when blends contained more than about 20 wt% rubber. Blends containing SAM or SANMA as a compatibilizer were stayed in a injection molding machine at the molding temperature and afterwards specimens for the examination of the impact strength was prepared. Impact strength of blends containing SMA was decreased with retention time, while that of blends containing SANMA was not changed with retention time.

• Journal of the Korea Furniture Society
• /
• v.21 no.5
• /
• pp.380-391
• /
• 2010

Modular furniture's colors, materials, finishing materials and quantities are determined by users' tastes and it's diverse functions, shapes and sizes are determined by the spaces of users. That is, modules satisfy the diversity of consumers, meet differentiated individuals' tastes and enable communications with consumers rather than delivering one-way messages of designers. The contemporary spaces of the 21st century have been gradually shifting from uniform spaces attaching weight on individuals' individuality and tastes and along with it, the consumption of expensive custom-made furniture and foreign branded furniture is increasing to satisfy those small numbers of consumers who want to express diversified individuality. The modular furniture as a concept which is the most suitable to Mass Customization can be produced in large quantities while considering the diverse needs and tastes of individuals and it does not have absolute shapes or sizes. The concept of modular furniture shows similarities to the creation of fractals that forms shapes by self similarities, repeats and similar transformations which is in the same context as the characteristics of a modular design that presents diversity with scales, materials and jointing points. Fractals will be combined with the digital media of today to present great plasticity and influence designers more heavily. Pursuit of new modeling is a requisite for the creation of future spaces and it will require continuous creativity and the transformable modular furniture will contribute to the satisfaction of diverse consumers' needs. This study is to propose the modular furniture that considers the diversity of the public in the 21st century and their individuality and that will enable interactions between designers and consumers.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.574-578
• /
• 2010

In this study, the caprolactone modified hydroxy acrylates (CHAs) were synthesized by ring-opening reaction of caprolactone and 2-hydroxyethyl acrylate (2-HEA) as initiator. Also, the caprolactone modified urethane acrylate (UA) oligomers were synthesized by condensation reaction of previously synthesized CHAs, 2-hydroxyethyl acrylate (2-HEA) and hexamethylene diisocyanate trimer (HDT). Using the hydroxy number of CHAs, the molecular weights of the CHAs were calculated easily and their molecular weight was similar to the theoretical molecular weight of them. The viscosity of UA oligomers decreased as increasing a content of CHA in the UA oligomer. Cure films were prepared from UA oligomer, reactive diluents, and UV initiator to investigate their physical properties. The thermal stability and color difference on high temperature for the cured film were improved as increasing the crosslinking density. Their surface hardness was also increased as increasing crosslinking density of the cured films, but their elongation at break was decreased.

• Korean Institute of Interior Design Journal
• /
• v.19 no.4
• /
• pp.58-65
• /
• 2010

The purpose of this study is to be applied with the basic data for the design method in the housing space which is differential. So, we analyzed the expression method and the application characteristic to materials of units in housing complex. To that, we researched on the condition of finishing material about the kind of material, color, texture and pattern for components in living room space. The results of this study are as follows : First, at the present time, the Object concept is expressed by 'mixing' and 'juxtaposition' of material, texture and pattern of finishing materials in housing space. But, we could find that the Object concept was used restrictively in housing space. So, we have to find different expression methods to be the effective and differential design by being applied Object concept for the housing space. Second, the 'mixing' which is the method to express the Object concept is showed in only 'art wall'. so, we can estimate that the method is the limited method to plan the varied housing. It is needed various expression methods to design components for the housing space. Third, it showed that the 'mixing' was a passive expression method using a little differential for design of housing space. We could estimate that similar methods were applied to the housing design. By results of this study, we can think that the develop study is needed to find design methods for expression of the Object in housing space.

• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.85-94
• /
• 2006

Due to multidisciplinary characteristic of the Interior Design field, it has developed into complex interdisciplinary field. Therefore Interior Design field has grown and established its major trends dependent upon other related field of study. With this perspective in mind, esthetics on Interior Design has to be treated in similar manner. In modem architects or artists have defined the terminology 'object' theoretical principle where by unable to distinguish between 'object's type' and 'objects', Presently, the term 'object' became a trend word. In order to confront misconception of the idea of 'Objectification', some people definition as reflection of this complex society. In this paper, it will establish a solid groundwork for a discussion on Objectification. The initial approach will deal with Le Corbusier and esthetics, which is the center of argument. By reviewing theoretical background of the related modern art, the paper discusses about the relationship between Le Corbusier and esthetics. Subsequently, the discussion about the criterions necessary to define object is provided. This paper only suggests a methodology of analyzing a trend in Interior Design. The condition to define Objectification in Interior Design, which is a result of the reviewing process on esthetics, can be concluded as 'modeling form(transformation of morphological meaning with change wrought by causing a visual reaction)', 'mixtures and modification of materials(transformation and spontaneity through mixing materials)' and 'elements greatly influence space' of the Interior Design.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.10
• /
• pp.821-828
• /
• 2016

Recently, the use of composite materials in the defense system has grown dramatically. The strength/weight and stiffness/weight ratios of composite structures are normally higher than of metals. Woven composites, especially, are increasingly considered for a variety of applications, because they offer good workability for complicated structures. HPW193/RS1222 is one of the most famous woven composites and has been used in many types of Korean military equipment, such as antenna pedestals and radar systems. In this study, we predicted the elastic modulus of HPW193/RS1222 using the principles of unidirectional composite stiffness predictions, such as ROM (Rule of Mixture), HSR (Hart Smith 10% Rule), CLA (Classical Laminate Analysis) and LAP (Laminate Analysis Program). We compared the dynamic characteristics with the experimental predictions and finite-element analysis (FEA). From our results we concluded that transversely isotropic materials are similar to isotropic materials when the shape of the composite structure is complicated.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.3
• /
• pp.160-163
• /
• 2013

We investigated the effect of light intensity and wavelength of a solar cell device by using photoconductive atomic force microscopy (PC-AFM). The $POCl_3$ diffusion doping process was used to produce a p-n junction solar cell device based on a Poly-Si wafer and the electrical properties of prepared solar cells were measured using a solar cell simulator system. The measured open circuit voltage ($V_{oc}$) is 0.59 V and the short circuit current ($I_{sc}$) is 48.5 mA. Also, the values of the fill factors and efficiencies of the devices are 0.7% and approximately 13.6%, respectively. In addition, PC-AFM, a recent notable method for nano-scale characterization of photovoltaic elements, was used for direct measurements of photoelectric characteristics in local instead of large areas. The effects of changes in the intensity and wavelength of light shining on the element on the photoelectric characteristics were observed. Results obtained through PC-AFM were compared with the electric/optical characteristics data obtained through a solar simulator. The voltage ($V_{PC-AFM}$) at which the current was 0 A in the I-V characteristic curves increased sharply up to 1.8 $mW/cm^2$, peaking and slowly falling as light intensity increased. Here, $V_{PC-AFM}$ at 1.8 $mW/cm^2$ was 0.29 V, which corresponds to 59% of the average $V_{oc}$ value, as measured with the solar simulator. Also, while light wavelength was increased from 300 nm to 1,100 nm, the external quantum efficiency (EQE) and results from PC-AFM showed similar trends at the macro scale, but returned different results in several sections, indicating the need for detailed analysis and improvement in the future.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.345-351
• /
• 2018

We employed an unprecedented technique to synthesize porous $WO_3@SnO_2$ nanofibers exhibiting core-shell and fiber-in-tube configurations. Firstly, 2-methylimidazole was uniformly incorporated in as-spun nanofibers containing ammonium metatungstate hydrate and the sacrificial polymer (polyacrylonitrile). Secondly, the 2-methylimidazole on the surfaces of nanofibers was complexed with tin(II) chloride ($SnCl_2$) via simple impregnation of the as-spun nanofibers in ethanol containing tin(II) chloride dihydrate ($SnCl_2{\cdot}2H_2O$). The presence of vacant p-orbitals in tin (Sn) and the nucleophilic nitrogen on the imidazole ring allowed for the reaction between $SnCl_2$ and 2-methylimidazole, forming adducts on the surfaces of the as-spun nanofibers. The calcination of these nanofibers resulted in porous $WO_3@SnO_2$ nanofibers with a higher surface area ($55.3m^2{\cdot}g^{-1}$) and a better response to 1-5 ppm of acetone than pristine $SnO_2$ NFs synthesized using a similar method. An improved response to acetone was achieved upon functionalization of the $WO_3@SnO_2$ nanofibers with catalytic palladium nanoparticles. This work demonstrates the potential application of $WO_3@SnO_2$ nanofibers as sensing layers for chemiresistive sensory devices for the detection of acetone in exhaled breath.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1998.04b
• /
• pp.6-6
• /
• 1998

In 1957, the first magnetic disk drive compatible with a movable head was introduced as an external file memory device for computer system. Since then, magnetic disks have been improved by increasing the recording density, which has brought about the development of a high performance thin film magnetic head. The thin film magnetic head has a magnetic circuit on a ceramic substrate using IC technology. The physical property of the substrate material is very important because it influences the tribology of head/disk interface and also manufacturing process of the head. $Al_{2}O_{3}$-TiC ceramics, so called ALTIC, is known to be one of the best substrate materials which satisfies this property requirement. Even though the head is not in direct contact with the disk, frequent instantaneous contacts are unavoidable due to its high rotating speed and the close gap between them. This may cause damage in the magnetic recording media and, thus, it is very important that the magnetic head has a good wear resistance. $Al_{2}O_{3}$-TiC ceramics has an excellent tribological property in head/disk interface. Manufacturing process of thin film head is similar to that of IC, which requires extremely smooth and flat surface of the substrate. The substrate must be readily sliced into the heads without chipping. $Al_{2}O_{3}$-TiC ceramics has excellent machineability and mechanical properties. $Al_{2}O_{3}$-TiC ceramics was first developed at Nippon Tungsten Co. as cutting tool materials in 1968, which was further developed to be used as the substrate materials for thin film head in collaboration with Sumitomo Special Metals Co., Ltd. in 1981. Today, we supply more than 60% of the substrates for thin film head market in the world. In this paper, we would like to present the sintering process of $Al_{2}O_{3}$-TiC ceramics and its property in detail.

• Journal of Powder Materials
• /
• v.18 no.1
• /
• pp.64-72
• /
• 2011

Nondestructive instrumented indentation test is the method to evaluate the mechanical properties by analyzing load - displacement curve when forming indentation on the surface of the specimen within hundreds of micro-indentation depth. Resistance spot welded samples are known to difficult to measure the local mechanical properties due to the combination of microstructural changes with heat input. Particularly, more difficulties arise to evaluate local mechanical properties of resistance spot welds because of having narrow HAZ, as well as dramatic changed in microstructure and hardness properties across the welds. In this study, evaluation of the local mechanical properties of resistance spot welds was carried out using the characterization of Instrumented Indentation testing. Resistance spot welding were performed for 590MPa DP (Dual Phase) steels and 780MPa TRIP (Transformation Induced Plasticity) steels following ISO 18278-2 condition. Mechanical properties of base metal using tensile test and Instrumented Indentation test showed similar results. Also it is possible to measure local mechanical properties of the center of fusion zone, edge of fusion zone, HAZ and base metal regions by using instrumented indentation test. Therefore, measurement of local mechanical properties using instrumented indentation test is efficient, reliable and relatively simple technique to evaluate the tensile strength, yield strength and hardening exponent.