• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.139-142
• /
• 1999

In this paper, a method of Radome design is considered. The shape is similar to tangent-ogive, and the antenna is a waveguide broad-wall slot array antenna. The characteristic of the Radome material is obtained by measuring test samples. By analyzing the transmission efficiency of the flat plate, Radome wall thickness is determined firstly. And then, the detailed characteristics of the Radome are analyzed by using GO-PO approximation technique. Several simple parameters of the designed Radome are tested and compared with the simulation results.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1240-1241
• /
• 2008

Superconducting ceramics of YBaCuO was fabricated on SrTiO substrate by chemical fabrication method using fine powder of YBaCuO having diameter less than 1um. The pattern of the fabricated superconducting bulk was linear and the thickness of it can be controlled in the range of 50um. The structure of the surface of film by diffraction pattern and composition. The tape like YBaCuO bulk with width of 10mm was formed on substrate using similar method. Tape like film is expected to utilize as material of superconducting tape.

• Journal of Plant Biology
• /
• v.14 no.1
• /
• pp.1-4
• /
• 1971

To determine the amylase fromation mechanism and the effect of GA. in germinating barley seeds, they were divided into embryo-less seed, isolated embryo, aleurone layer and pure endosperm etc., treated with GA, and cultured separately or in mixed lots. The result obtained are as follows. 1) The amylase of barley seed is formed in the aleurone layer under the effect of inducing materials excreted from the embryo. 2) The embryonic materials amylase formation could be substituted for by GA. Therefore it can be presumed that the substance produced by the embryo which induces amylase synthesis is probably GA or material similar to it.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.143-148
• /
• 1999

The purpose of this study is to find sedimentation patterns variation before and after Saemangeum reclamation. Water circulations are calculated diagnostically from the observed water temperature and salinity data and wind data and tidal residual current. Three dimensional movements of injected particles due to currents, turbulence and sinking velocity are tracked by the Euler-lagrange methoed. Calculated sedimentation patterns of riverine material are highly similar to the observed ones.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.620-626
• /
• 1997

In this study. use if CSA expansive additive for concrete is discussed, particulary applications to partial compacting the concrete structure of spillway gate located in Youngjong new airport construction field. Before the field applications, several basic laboratory test were carried out in order to clarify the material characteristics and to decide mix proportions. As the result the concrete using CSA expansive additive show similar workability and compressive strength to that of OPC concrete. Forethemore, it can be concluded that the use of CSA component is effective to prevent shrinkage crack and to achive volume stabiliy of concrete structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.621-624
• /
• 2007

As a new fluoranthene derivative, a synthesis of benzo[k]fluoranthene was suggested, so new blue emitting materials, 7,12-diphenylbenzo[k] fluoranthene [DPBF] and 7,8,10- triphenylfluoranthene [TPF] were synthesized. $EL_{max}$ wavelength of the device using DPBF as an emitting layer was 436 and 454nm in the deepblue region, which are similar values with PL. The device that used DPBF as an emitting layer showed high efficiency of 2.11cd/A and the excellent color coordinate value of (0.161, 0.131) in deep-blue region.

• Applied Microscopy
• /
• v.45 no.3
• /
• pp.115-118
• /
• 2015

In this review paper, I'd like to introduce the basics of angle-resolved photoemission spectroscopy (ARPES) and some of my results taken at the Pohang Accelerator Laboratory (PAL), the only synchrotron radiation in South Korea. The results show that ARPES is very useful, in particular, for studying two-dimensional materials. It looks like a microscope in momentum space similar to transmission electron microscope imaging atoms in real space.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.187-188
• /
• 2020

Recently, some researchers have found, as a part of the development of new materials, the rice straw ash can also be used as a pozzolanic material for concrete considering similar chemical properties of rice straw ash to that of rice husk ash. Therefore, the purpose of this study was to improve compressive strength of concrete adding agriculture by-product. Compressive strength were tested on rice straw ashes at 600℃ to identify improving strength effect.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.3
• /
• pp.39-43
• /
• 2011

Effects of cavity material on the Q-factor measurement of microwave dielectric materials were studied by HFSS simulation and the measurements using metal cavity. $TE_{01\delta}$ mode resonant frequency was determined from the electric and magnetic field patterns and the loaded Q-factor was calculated from 3dB bandwidth of $S_{21}$ spectrum. When the cavity metal materials were Cu, SUS and Au cavity, the level of Q-factor was similar. However, Q-factor was significantly decreased when the cavity metal material was CuO. The Q-factor measurements of dielectric resonator by network analyzer using various metal cavity exhibits consistent behavior.

• Computers and Concrete
• /
• v.21 no.3
• /
• pp.321-333
• /
• 2018

Flat-slabs, being a significant structural component, not only reduce the dead load of the structure but also reduce the amount of concrete required for construction. Moreover the use of recycled aggregates lowers the impact of large scale construction to nearby ecosystems. Recycled aggregate based concrete being a quasi-brittle material shows enormous cracking during failure. Crack growth in flat-slabs is mostly in sliding mode (Mode II). Therefore sufficient sections need to be provided for resistance against such failure modes. The main objective of the paper is to numerically determine the ultimate load carrying capacity of two self-similar flat-slab specimens and validate the results experimentally for the natural aggregate as well as recycled aggregate based concrete. Punching shear experiments are carried out on circular flat-slab specimen on a rigid circular knife-edge support built out of both normal (NAC) and recycled aggregate concrete (RAC, with full replacement). Uniaxial compression and bending tests have been conducted on cubes, cylinders and prisms using both types of concrete (NAC and RAC) for its material characterization and use in the numerical scheme. The numerical simulations have been conducted in ABAQUS (a known finite element software package). Eight noded solid elements have been used to model the flat slab and material properties have been considered from experimental tests. The inbuilt Concrete Damaged Plasticity model of ABAQUS has been used to monitor crack propagation in the specimen during numerical simulations.