• Journal of Medicine and Life Science
• /
• v.20 no.2
• /
• pp.60-66
• /
• 2023

Gentamicin-loaded bone cement used in total joint arthroplasty is indispensable, as it provides stability by directly binding the surfaces of implants and bones. Depending on multiple factors, including the material of the bone cement used, common complications, such as aseptic loosening, osteolysis, and infection can occur postoperatively. In clinical practice, Doujet bone cement is easy to handle (pre-packed all-in-one system), and has shown low failure rates and non-inferior results compared with similar available products. We conducted a retrospective comparative study to analyze the clinical and radiological results of each bone cement group to establish the safety and usefulness of Doujet bone cement. From July 2020 to July 2022, we enrolled 198 patients in this study after an average follow-up period of 37 months (range, 6-48 months). In 99 patents, Doujet^® bone cement (Injecta, Gunpo, Korea) was used for total knee arthroplasty (TKA), while Refobacin^® bone cement (Biomet, Warsaw, IN, USA) was used in 99 patients. The average range of motion (ROM) of the knee increased by 2.4° (from 127.0° preoperatively to 129.4° postoperatively) in the Doujet group, and by 0.1° (from 128.7° to 128.8°) in the Refobacin group (P=0.701). The Western Ontario and McMaster Universities (WOMAC) osteoarthritis index scores decreased from 44.1 to 7.8 in the Doujet group, and from 44.2 to 6.3 in the Refobacin group (P=0.162). Complications, such as osteolysis or post-operative wound infection, did not occur in more than two cases in both groups. The WOMAC and ROM of the knee in both groups had no clinical differences. Both Doujet and Refobacin similarly showed low complication rates after TKA.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.7
• /
• pp.65-72
• /
• 2006

This study is about the estimation of the mechanical properties of cement grout material using a magnetic field treated water instead of tap water. The water that passed through a magnetic system is called MFTW. Similar research indicates that 5% of cement dosage can be saved by decreasing bleeding of concrete and improving resistance to freezing. The reason why MFTW can improve characteristics of concrete can be explained by molecular structure of water. Magnetic force makes water clusters into single molecule or small ones. Hence, the activity of water is improved by the magnetic force. While hydration of cement particles is on progress, the MFTW can penetrate the core region of cement particles more easily. Therefore, the hydration can be carried out more efficiently and the compression strength of concrete is highly improved. The sample of the sodium silicate cement grout's homogel using the MFTW results in highly compressive strength increases in compressive strength approximately from 20% to 50%.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.11
• /
• pp.29-38
• /
• 2010

The steel pipe of steel-concrete composite piles increases the pile strength and induces the ductile failure by constraining the deformation of the hiller concrete. In this research, the load-movement relations and the reinforcement effect by the outer steel pipe in the steel-concrete composite pile were analyzed by performing three-dimensional numerical analyses, which can simulate the yielding behavior of pile material and the elasto-plastic behavior of soils. The parameters analyzed in the study include three pile materials of steel, concrete and composite, pile diameter, pile distance and loading direction. The results showed that the axial capacity of the composite pile was about 90% larger than that of the steel pipe pile while similar to that of the concrete pile. At the allowable movement criteria, the horizontal capacity of the composite pile was about 50% lager than that of the steel pile and about 22% larger than that of the concrete pile.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.2
• /
• pp.19-27
• /
• 2007

Dry and wet test methods established by Korean industrial standards to estimate opening size of 3 types of geotextile which are widely used for filter of plastic drain board in Korea are performed to evaluate characteristics of the test methods and to compare the test results. Judging from test results, dry method is a relatively poor test, having lots of problems causing many errors but a simple-quick test. Wet method is a very specific test avoiding many of the problems of dry method such as electrostatic charges, trapping in the geotextiles and so on. However, one of wet test methods, KS K ISO 12956, takes long time to complete a test and is too strict to handle loss of granular material. Generally, opening size of a geotextile by wet test method is smaller than that of dry test method. Especially, opening size by KS F 2126 which is called hydrodynamic method but at present is not used anymore is similar to or smaller than that by KS K ISO 12956 method.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.213-220
• /
• 2022

In this study, a functional study was conducted to confirm the inhibitory effect of IL-6 and TFN-α, which are allergic inflammation inhibitory effects, using natural extracts 640 types of substances. Of the 640 types, 36 substances showed 100% cell viability, and among the extracts showing the IL-6 inhibitory effect, 8 substances showed an inhibitory effect similar to that of cyclosporin A, and 5 substances showed an inhibitory effect on TFN-α. In particular, two types of extracts showing a common inhibitory effect on IL-6 and TFN-α showed an anti-allergic anti-inflammatory effect and a strong anti-allergic anti-inflammatory effect in Hagocho and Snow lotus extract. It is thought that these contents can be used as a functional natural cosmetic material for allergy-inflammation suppression using natural extracts.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1382-1399
• /
• 2023

Pressure relief valve (PRV) is one of the important control valves used in nuclear power plants, and its sealing performance is crucial to ensure the safety and function of the entire pressure system. For the sealing performance improving purpose, an explicit function that accounts for all design parameters and can accurately describe the relationship between the multi-design parameters and the seal performance is essential, which is also the challenge of the valve seal design and/or optimization work. On this basis, a surrogate model-based design optimization is carried out in this paper. To obtain the basic data required by the surrogate model, both the Finite Element Model (FEM) and the Computational Fluid Dynamics (CFD) based numerical models were successively established, and thereby both the contact stresses of valve static sealing and dynamic impact (between valve disk and nozzle) could be predicted. With these basic data, the polynomial chaos expansion (PCE) surrogate model which can not only be used for inputs-outputs relationship construction, but also produce the sensitivity of different design parameters were developed. Based on the PCE surrogate model, a new design scheme was obtained after optimization, in which the valve sealing stress is increased by 24.42% while keeping the maximum impact stress lower than 90% of the material allowable stress. The result confirms the ability and feasibility of the method proposed in this paper, and should also be suitable for performance design optimizations of control valves with similar structures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.91-96
• /
• 2023

To verify the quality of bubbles during the use of quartz glass crucibles (QC), an appropriate accelerated testing method was proposed. The bubble state of discarded waste crucibles obtained from actual Czochralski (Cz) processes was analyzed, and optimal heat treatment conditions were suggested by varying temperature, pressure, and time using the QC test piece. By subjecting the samples to heat treatment at 1450℃, 0.4 Torr, and 40 hours, it was possible to control the bubble size and density to a similar level as those generated in the actual Cz process. In particular, by selecting a relatively lower pressure of 0.4 Torr compared to the typical range of 10~20 Torr applied in the Cz process, the time required for accelerated bubble formation testing could be reduced. However, it was determined that increasing the heat treatment temperature to 1550℃ led to the phenomenon of Ostwald ripening, resulting in larger bubbles and a rapid decrease in density. Therefore, it was concluded that it was not a suitable condition for the desired b ake test.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.137-146
• /
• 2016

This experiment was designed to assess the physical and chemical properties of growing media substituted with a range of increasing concentrations of pretreated wood and to relate these properties to plant growth responses. For preparing the growing media, each material was combined with rural soil, peat, perlite and pretreated wood. Physicochemical properties studied were similar to ideal substrate ranges for plant growth on growing media, including pretreated wood. Physical properties were also well maintained over time. In comparison to plants growing in 100% rural soil, tall fescue(Festuca arundinacea) in the prepared growing media achieved better growth, especially when using the 50% rural soil + 50% PPW(peat + perlite + pretreated wood, 3:1:6(w/w/w)) and 30% rural soil + 70% PPW (peat + perlite + pretreated wood, 3:1:6(w/w/w)), and showed improved germination percentage. We confirmed the potential use of growing media, including pretreated wood. Furthermore, our results show a correlation among the physicochemical properties of tall fescue(Festuca arundinacea); physical properties were significantly influenced by germination and aerial parts. The root length of physicochemical properties was correlated with bulk density and organic compound (p<0.01).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.2
• /
• pp.1-16
• /
• 2023

Due to the current seriousness of environmental pollution and the eco-friendly movement of the fashion industry, research on sustainable fashion design is being actively conducted. In this study, consumer perception of upcycling products, are divided into image, function, and meaning; and image is further divided into shape, color, and material. It was redefined as pattern, and image recognition was evaluated among men and women in their 20s and 30s, and men and women in their 40s and 50s used as subjects. First, factors that determine each image were extracted based on qualitative analysis of the precedent cases of upcycling bags, and quantitative analysis of the subjects was induced through a questionnaire. As a result of the analysis of evaluation items related to image association, the average frequency analysis of all subjects for each stimuli and the cognitive variance of the frequency analysis by generation by gender were found to be similar. However, awareness of some stimuli by generation showed a significant difference. Overall, in the three stimuli with high overall preference, common features, such as the basic box-shaped symmetrical structure, the monochromatic color of the Munsell system, solid and practical texture, and appropriate use of patterns were identified. In addition, it was confirmed that there was a difference with factors such as femininity, simplicity, touch, and splendor in the measurement factors. In conclusion, it is considered that the main significance of this study is that it excluded the recognition and meaning of upcycling products and explored the original design and image elements of products. Therefore, it is expected that this study will be used as a basic data for responding to the gender image of each generation as an alternative method of sustainable fashion design, and it will be an opportunity to expand the scope of the study to a detailed study beyond the biased topic.

• Conservation Science in Museum
• /
• v.1
• /
• pp.37-42
• /
• 1999

Conservation treatment was done for the pottery-stand of Kaya period which was to be exhibited in celebration of the opening of Kimhae National Museum and for the jar of Chinese celadon which was to be exhibited in Korea National Museum's special exhibition "Formation of Ancient States". Through the examinations by naked eyes and under the microscope, condition before treatment, patterns and manufacturing techniques of the objects were observed. According to these examinations, conservation treatments, suitable for each object was finished. As the pottery-stand was damaged severely, the epoxy resin was pasted directly on the broken surface of the pottery to restore the original shape and pattern, color and feeling similar to original state were given to the restored area. Although same restoration material was applied on the celadon, it was not pasted directly on the broken surface of the celadon so that the restored area could be dismantled, and color and feeling were also treated somewhat differently.