• Journal of Conservation Science
• /
• v.33 no.4
• /
• pp.297-312
• /
• 2017

In the ancient iron-making process, a slag former was often added so that iron and other minerals in the ore could be smoothly separated. However, there are insufficient data for judging whether a slag former was added. Thus, in this study, we conducted a smelting experiment to understand the material characteristics of a steel structure that differed depending on the addition of a slag former. It was found that the steel structure produced in the first experiment had a total Fe content of 39.45-52.94 wt%, which decreased to 34.89-38.92 wt% in the second and third experiments. CaO compounds such as calcite, gehlenite, and hercynite appeared, in addition to iron oxides, after the addition of a slag former. As a result of an assessment of whether a slag former was added by comparing the ratio between the components, it was found that the ratio of $CaO/SiO_2$ was 0.42. From a comparative analysis of $Al_2O_3/SiO_2$ and $CaO/SiO_2$, it was judged that the ratio of $Al_2O_3$ and $SiO_2$ can be utilized as an index to judge similar systems of smelting process (ore, furnace wall, and fuel).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.283-292
• /
• 1996

This study was performed to determine the physical properties of rice hull and straw which could be used for an optimum design and operation of the handling facilities for these rice crop by-products. The properties measured were kinetic friction coefficient , bulk density, and dynamic and static angle of repose. Rice hulls with moisture content of 13% and 21% were used throughout the test while rice straws of 10% and 16% moisture were chopped into 10mm length and used for the test. Friction coefficient was calculated from the horizontal traction forces measurement when a container holding the mass of rice hull and straw was pulled over mild steel. PVC, stainless steel, and galvanized steel surface by a universal testing machine. Bulk density was measured by an apparatus consisting of filling fundel and a receiving vessel. Dynamic angle of repose which is the angle at which the material will stand when piled was calculated from the photos of bulk samples after they were flowed by gravity and accumulated on a circular surface. Static angle of repose which is the angle between the horizontal and the sloping side of the material left in the container when discharging was also measured in the similar way. Results and conclusions from this study are summarized as follows . 1. Kinetic friction coefficient of both rice hull and straw were in the range of 0.26 -0.52 and increased with the moisture content. The magnitude of friction increased in the order of galvanized steel, stainless steel, PVC ,and mild steel. 2. Bulk densities of rice hull decreased while those of rice straw increased with moisture content increase . Average bulk densities of rice hull and straw were 96.8 and 74.7kg/㎥, respectively. 3. Average dynamic angle of repose for rice straw was 32.6$^{\circ}$ and those for 13% and 21% moisture rice hull were 38.9$^{\circ}$ and 44.9$^{\circ}$ , respectively. 4. Static angles of repose for both rice hull and straw showed increase with the moisture content. The values were 75.2\ulcorner and 80.2$^{\circ}$ for 13% and 21% moisture rice hull, respectively. Rice straws having 10% and 16% moisture content showed 87.3% and 89.2$^{\circ}$ static angle of repose, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.365-372
• /
• 2001

The objective of this study was to determine the effects of various kinds of composts on the change of soil physical properties and microorganism in upland soils. Field experiments were conducted in the loam and sandy loam soils, while the clay loam and sandy loam soils were used for laboratory experiments. Various kinds of composts such as poultry manure compost(PMC). cow manure compost(CMC). human excrement sludge(HES), and food industrial sludge compost(FISE) were applied annually at rates of 0, 40, and $80Mg\;ha^{-1}$ to soils grown with soybean and maize plants for 4 years during 1994 to 1997. The results of this study were as follows : Bulk density of loam soil decreased with compost application to $1.07{\sim}1.32Mg\;m^{-3}$ compared with $1.49Mg\;m^{-3}$ of control plot, while in sandy loam soil it decreased to $1.00{\sim}1.20Mg\;m^{-3}$ compared with $1.25Mg\;m^{-3}$ of control plot. Bulk density of soil was decreased according to maize cultivation compared with bare control, but soybean cultivation was similar. Population of organic material decomposing microorganisms was increased rapidly at the initial incubation stage at $25^{\circ}C$, and increased more sensitively at the loam soil than sandy loam soil. In the case of the change of microorganisms associated with nitrogen circulation, ammonia oxidizing bacteria was more at the initial incubation stage, and denitrifying bacteria was more at the initial incubation stage, and denitrifying bacteria increased until 1~4 weeks after incubation and increased more at the loam soil than sandy loam soil.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.17-26
• /
• 2010

Recently, yellow poplar (Liriodendron tulipifera L.) is getting attention in Korea due to the fast growing and high yield and quality of lumber. But, it is thought that the color difference between heartwood and sapwood may restrict the practical use of it. This study was aimed to enhance the value of yellow poplar lumber by the color control using high temperature heat-treatment, which had been tried for domestic cedar (Kim et al., 2009). The material properties including surface color of yellow poplar lumber were evaluated according to heat treatment conditions. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature about $200^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent of the control. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition. The durability against wood rotting fungi also increased by the heat-treated, but it was not so effective as the case of cedar. The changes of mechanical properties of heat-treated yellow poplar were very similar to that of heat-treated cedar. In order to develop new use of heat-treated yellow poplar, the changes of mechanical properties should be considered. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study of heat-treated wood is needed to scrutinize the causes of changes of material properties.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.532-540
• /
• 2010

The strength properties of wooden model retaining wall made of pitch pine (Pinus rigida Miller) was evaluated. Three different types of wooden model retaining wall were made of the 11cm square timber treated with CUAZ-2 (Copper Azole). The retaining wall was made into the 4 layers of crossbar and the 3 layers of vertical-bar, of which the size was 86 cm high, 200 cm long and 96 cm wide. Type I was control and in Type II 20 cm vertical-bars and 93 cm vertical-bars were arranged alternately to decrease wood usage. TypeIII was similar to TypeII except that the connection between crossbars was reinforced with the wooden armature. In each type, the strength properties of retaining wall were investigated by horizontal loading test and the deformation of structure by image processing (AICON 3D DPA-PRO system). In horizontal loading test of Type I, Type II and Type III was 63.17, 57.80, and 60.97 kN/m, respectively. The deformation of the top layer in Type II was 1.5 times larger than in Type I and Type III. Consequently, the economic efficiency and strength performance were better in Type III than in Type I and Type II.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.255-271
• /
• 2009

This study was examined interpretation of making techniques and provenance interpretation of raw materials for the potteries from the Nongseori site in Giheung based on archaeometric characteristics. The potteries are classified into three groups according to the archaeological age. The texture of Neolithic age potteries is sandy soil added a lot of temper such as talc and mica, and Bronze age potteries contain sandy materials which occur naturally include quartz, orthoclase, plagioclase and mica. On the other hand, Proto-three Kingdom Age potteries made of silty soil that sift out coarse minerals from the clay. But all pottery and soil samples in the study were very similar patterns with geochemical evolution trend. This result is sufficient evidence that all pottery samples were produced using the same raw materials from the host rocks around of the site area. The Neolithic age potteries had loose texture and fired probably about 700 to $760^{\circ}C$. The Bronze age potteries had experienced firing about 850 to $900^{\circ}C$. And Proto-three Kingdom Age potteries had compact textured and fired from 900 to $1,050^{\circ}C$. The making techniques of potteries are not represented discontinuation characteristics about the periodic time sequences, and are suggested that revealed a transitional change patterns for production techniques.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.299-316
• /
• 2009

The Goryeo roof tiles from the Oegol site in Tangjeong, Asan are classified into three groups in color such as gray, red yellow and gray-yellow groups, respectively. While each group of tiles shows characteristic specific gravity, absorption ratio, LOI and vitrification degree, mineral content and distribution, and chemical composition are generally homogeneous among all groups of roof tiles. Also, all roof tiles and soils from the site show similar geochemical behavior of elements and clay-mineralization degree. This indicates that the soil from the site is probable to be a raw material of the roof tiles. Firing temperature of the roof tiles is estimated as 950 to $1,050^{\circ}C$ for the gray group, 800 to $900^{\circ}C$ for the red yellow group, and 900 to $950^{\circ}C$ for the gray-yellow group. In conclusion, roof tiles from the Oegol site is interpreted to be made of local clay without additive minerals, applying various firing conditions and standardized purifying process of raw clay materials.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.151-160
• /
• 2016

To understand size fractioned chlorophyll a and material cycles of coastal ecosystem in Uljin marine ranching area (JMRA) of East Sea, 4 times of survey were conducted from April to November 2008. Picoplankton, nanoplankton and netplankton in the surface of UMRA fluctuated with an annual mean of $0.26{\mu}g\;L^{-1}$ between the lowest value of $0.03{\mu}g\;L^{-1}$ and the highest value of $0.87{\mu}g\;L^{-1}$, annual mean $1.32{\mu}g\;L^{-1}$ between $0.11{\mu}g\;L^{-1}$ and $5.60{\mu}g\;L^{-1}$, annual mean $0.45{\mu}g\;L^{-1}$ between no detected (nd) and $4.68{\mu}g\;L^{-1}$, respectively. And the relative ratio of picoplankton, nanoplankton and netplanktons on the phytoplankton biomass was on annual average 12.9%, 65.0% and 22.1%, respectively. The 10 m layer was similar to the surface. The relative ratio of pico- and nano-plankton was higher throughout the year. That is, the material cycle of UMRA consists of a microbial food web rather than traditional food chain at a lower trophic levels. Primary production is deemed to have a higher possibility of being adjusted by top-down dynamics, such as micro-zooplankton grazing pressure rather than nutrients supply.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.2
• /
• pp.174-188
• /
• 2004

In the life environment changed with not only the quality and the price of the products but also the material abundance, it is the most crucial factor for the strategy of product sales to investigate consumer's sensibility and preference degree. In this perspective, it is necessary to design and merchandise the products in cope with each consumer's sensibility and needs as well as its functional aspects. In this paper, we propose the Fashion Design Recommender Agent System (FDRAS-pro) for textile design applying collaborative filtering personalization technique as one of the methods of material development centered on consumer's sensibility and preference. For a collaborative filtering system based on textile, Representative-Attribute Neighborhood is adopted to determine the number or neighbors that will be used for preferences estimation. Pearson's Correlation Coefficient is used to calculate similarity weights among users. We build a database founded on the sensibility adjectives to develop textile designs by extracting the representative sensibility adjectives from users' sensibility and preferences about textile designs. FDRAS-pro recommends textile designs to a customer who has a similar propensity about textile. To investigate the sensibility and emotion according to the effect of design factors, fertile designs were analyzed in terms of 9 design factors, such as, motif source, motif-background ratio, motif variation, motif interpretation, motif arrangement, motif articulation, hue contrast, value contrast, chroma contrast. Finally, we plan to conduct empirical applications to verify the adequacy and the validity of our system.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.287-296
• /
• 2020

Mine Reclamation Project is being carried out with the aim of ensuring a sustainable green living and helping to develop eco-friendly mines by analyzing, removing and preventing the harmful factors. Mines developed during the japanese colonial period and mining boom period are still not repaired throughout the country, and from these scattered risks, public safety is worth pursuing as a top priority. The project that is close to public safety in the mine recalmation project is an emergency treatment, and the most widely used method is a filling method similar to the ground subsidence prevention. If dangerous mine cavity or tunnels are located in the mountains, charging with existing materials may not be possible, or unreasonable cases may occur, and new methods of technological development are required. Emergency actions should be carried out safely and efficiently to prevent the loss of precious people's lives on the hiking paths adjacent to dangerous mining sites. In these field conditions, urethane foam materials may be an alternative. In this study, the applicability of urethane foam materials in mining was reviewed through overseas cases. It was also tested on the appropriate depth of top soil for the protection of urethane foam materials through forest fire simulation test. The test result show that approximately 15cm of soil covering (recommended 20cm over) was suitable for maintaining the function of foam materials from forest fires.