• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.184-189
• /
• 2002

This study, compared with data of PbO-base glass system is a part of new glass composition design with Bi-base composition for PDP Rib. As $Bi_2O_3-B_2O_3-ZnO$ glass composition including Bi, which have similar density value and work facility to PbO, properties of softening point, thermal expansion coefficient, chemical durability, dielectric constant, and structural changing by XPS were investigated. $Bi_2O_3-B_2O_3-ZnO$ glass system, added 50∼80 wt% $Bi_2O_3$ widely, were presented 400∼480$^{\circ}C$ softening temperature, $68{\sim}72{\times}10^{-7}/^{\circ}C$ thermal expansion coefficient and 13∼25 dielectric constant. These results were showed similar physical properties with Pb-base glass system of same composition content, application possibility as starting composition of rib material was identified through micro-control of components and physical properties. The bonding energy of $O_{1s}$ as the $Bi_2O_3$ content decreasing was increased and full width at half-maximum (FWHM) was decreased, which is caused by non-bridging oxygen increasing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.6
• /
• pp.238-242
• /
• 2016

The effect of the alkali, alkali earth metal elements on selective catalytic reduction(SCR) catalyst deactivation behavior were investigated in terms of microstructure, surface area, pore volume and De-NOx test. Poisoned SCR catalyst were manufactured by injection of $K_2CO_3$, $Na_2CO_3$, $Ca(CH_3COO)_2{\cdot}H_2O$, $C_4H_6MgO_4{\cdot}4H_2O$, $H_3PO_4$ solutions in the new SCR catalyst at $350^{\circ}C$ for 6 hours. New and poisoned catalysts surface were similar. But specific surface area, pore volume decrease from Na, Mg, K, Ca, P compared to new SCR catalyst. Especially, Na poisoned catalyst surface area and pore size extremely decreased by $10.20m^2/g$, $0.061cm^2/g$. De-NOx test results of new and poisoned catalysts at $150{\sim}450^{\circ}C$ indicated that alkali metal (K, Na) poisoned SCR catalysts have the lowest De-NOx efficiency, alkali earth metal poisoned SCR catalysts (Ca, Mg) De-NOx efficiency are higher than alkali metal poisoned SCR catalysts. P poisoned SCR catalyst De-NOx efficiency is similar new SCR catalyst. It were considered that physical deactivation of SCR catalyst was affected by SCR catalyst surface area and pore volume change.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.480-492
• /
• 1997

In order to understand the processes involved in the petrogenesis and the differentiation of the primary magma spectrum, a petrological and geochemical properties were investigated for the Chonju and the Sunchang foliated granites, which are located in the southwestern part of the Okchon zone and extends up to the northwestern boundary of the Ryongnam massif as two subparallel batholiths. Major element analyses show that the Chonju and Sunchang foliated granites are classified petrologically into a weakly to strongly peraluminous or calc-alkaline, but do not fit neatly into either of the I/S-type or magnetite/ilmenite-series classification schemes for granites, although the I-type and magnetite-series characteristics seem to be predominant based on the major element chemistry. In normative compositions, the Chonju granite is petrographically evolved from granodiorite to granite, whereas the Sunchang granite is from granodiorite to quartz monzodiorite. It seems to suggest a difference of the magmatic evolution processes such as crustal assimilation and/or fractional crystallization in magma. The REE patterns of both batholiths show high similarity and strongly fractionated REE distributions which show high $(Ce/Yb)_N$ ratios and little or no Eu anomalies. These REE patterns correspond broadly to those seen in the pre-Cretaceous granitoids of Korea. Apparently, the evidences obtained from the bulk compositions strongly suggest that the two foliated granitoids were formed by partial meltings of a relatively restricted and similar, may be common, source material which contains a continental crust component having an igneous composition, and have undergone a similar magmatic differentiation processes.

• Journal of Gastric Cancer
• /
• v.5 no.4 s.20
• /
• pp.217-221
• /
• 2005

Purpose: The incidence of gastric neoplasms is increasing in the elderly population, and a rational method of treatment for gastric cancer in the elderly is needed to improve survival. The purpose of the present study was to clarify whether the patient's age is an independent prognostic factor and to determine clinicopathological characteristics in the elderly. Material and Methods: Curative or palliative surgery for gastric cancer was carried out on 706 patients in Chosun University Hospital from March 1995 to February 2002. They were divided into the following two groups: elderly group (75 years or older) and control group (under 74 years old). The clinicopathologic features of these patients were reviewed retrospectively, and a multivariate analysis was performed. Results: There was no difference in clinicopathological appearances between the two groups, and the postoperative morbidity and mortality rates were similar in the two groups. The two groups showed similar survival rates. Conclusion: In this study, age was not a prognostic factor in surgery for gastric cancer. In the elderly, an oncologically correct surgical procedure can safely be prosecuted with satisfactory early and late results.

• Journal of Life Science
• /
• v.30 no.5
• /
• pp.434-442
• /
• 2020

In this study, Tenebrio molitor (brown mealworm) larvae powder was fermented with Saccharomyces cerevisiae M1 (KACC 93023). The fermented and non-fermented powders were subsequently administered to rats with induced non-alcoholic fatty liver disease to compare the degree of improvement. The rats exhibited abnormal lipid metabolism due to orotic acid, and the group that were fed the fermented larvae powder showed similar weight to normal rats. AST, ALT, ALP, and LDH activities, all known indicators of liver health, and various other lipid-related indicators appeared positive, suggesting improvement. The lipid peroxide and glutathione content in the liver tissue and serum were similar to or better than those of the normal group. Finally, morphological observations of liver tissue using H&E and oil red O stainings revealed that the fermented powder group showed markedly reduced fat along with normal hepatocyte shape and arrangement. To summarize, it was confirmed that dietary brown mealworm larvae improve non-alcoholic fatty liver function, and, when fermented with yeast, most indicators showed positive improvements to almost normal levels. As such, the fermented powder can be considered to improve non-alcoholic fatty liver, suggesting that it may be used as a material for various products in the future.

• Journal of Life Science
• /
• v.30 no.10
• /
• pp.844-850
• /
• 2020

Disaster-related extreme weather is rapidly increasing due to climate change. In Korea, typhoons accompanied by rainfall usually approach in August and September, causing great damage. The purpose of this study is to find a gene that regulates the heading date of rice in order to avoid loss of harvest from climate change and typhoons. Cheongcheong/Nagdong doubled haploid (CNDH) was used as the plant material to investigate the location of heading-related genes using QTL and sequence analysis by cloning the gene. In the distribution chart, the heading dates, culm lengths, panicle lengths, numbers of panicles, and 1,000-grain weights all have normal distributions. QTL analysis found 13 contigs on chromosome 8. One QTL, named qHd8, was detected on chromosome 8. The range at qHd8 was approximately 7.7 cM, with RM72 and RM404 markers near the peak. There were 13 contigs and 1 ORF. Protein sequence analysis showed that rice was similar to Os08g0341700, AtSFH13, and AtSFH7 proteins. Os08g0341700, which is involved in signal transduction, is similar to phosphatidylinositol transfer-like protein II, and complete information is not available, but it is believed to play a role in the phosphatidylinositol-specific signaling pathway related to Sec14P.

• Steel and Composite Structures
• /
• v.29 no.2
• /
• pp.273-286
• /
• 2018

In recent years, significant progress has been made in developing design rules for stainless steel members, while the investigation on bolted connections is relatively limited, in particular at elevated temperatures. In this paper, experimental and numerical investigations on stainless steel bolted connections at ambient and elevated temperatures from the literature were reviewed. Firstly, the research program that focused on structural behavior of cold-formed stainless steel (CFSS) bolted connections at elevated temperatures carried out by the authors were summarized. Over 400 CFSS single shear and double shear bolted connection specimens were tested. The tests were conducted in the temperature ranged from 22 to $950^{\circ}C$ using both steady state and transient state test methods. It is shown that the connection strengths decrease as the temperature increases in the similar manner for the steady state test results and the transient state test results. Generally, the deterioration of the connection strengths showed a similar tendency of reduction to those of the material properties for the same type of stainless steel regardless of different connection types and different configurations. It is also found that the austenitic stainless steel EN 1.4571 generally has better resistance than the stainless steel EN 1.4301 and EN 1.4162 for bolted connections at elevated temperatures. Secondly, extensive parametric studies that included 450 specimens were performed using the verified finite element models. Based on both the experimental and numerical results, bearing factors are proposed for bearing resistances of CFSS single shear and double shear bolted connections that subjected to bearing failure in the temperature ranged from 22 to $950^{\circ}C$. The bearing resistances of bolted connections obtained from the tests and numerical analyses were compared with the nominal strengths calculated from the current international stainless steel specifications, and also compared with the predicted strengths calculated using the proposed design equations. It is shown that the proposed design equations are generally more accurate and reliable than the current design rules in predicting the bearing resistances of CFSS (EN 1.4301, EN 1.4571 and EN 1.4162) bolted connections at elevated temperatures. Lastly, the proposed design rules were further assessed by the available 58 results of stainless steel bolted connections subjected to bearing failure in the literature. It is found that the proposed design rules are also applicable to the bearing resistance design of other stainless steel grades, including austenitic stainless steel (EN 1.4306), ferritic stainless steel (EN 1.4016) and duplex stainless steel (EN 1.4462).

• The Journal of the Petrological Society of Korea
• /
• v.5 no.1
• /
• pp.66-83
• /
• 1996

We report petrography, mineral chemistry, and major and trace element chemistry for rare tholeiites in Cheju island where alkalic rocks predominate. Available age data indicate that the tholeiitic magmatism was younger than 0.49Ma, possibly younger than 0.17 Ma. The tholeiites are generally fine-grained, porphyritic rock and show intergranular texture with lath-shaped plagioclase ($An_{61-46}$), orthopyroxene (bronzite) and olivine ($Fo_{78-67}$). Characteristically, two kinds of clinopyroxene (pigeonite and augite) occur only in groundmass. The tholeiites have normative quartz and show limited compositional variations ($SiO_2$=51.0-52.5 wt%; Mg＃=54-60). Major and transitional metal element variations of tholeiites are distinct from those of alkaline rocks in MgO diagram, suggestingthat the two rock types cannot be simply related to differentiation process from the same magma. The ratios among $K_2O$, Rb, Ba, Nb and La are similar for both tholeiites and alkali basalts, however the ratios between the elements (P, Y and Yb) having an affinity with garnet and the above elements are higher for tholeiites than for alkali basalts. These trace element ratios suggest that the tholeiites and alkali basalts were produced by different degrees of partial melting from a similar sources material (garnet lherzolite mantle).

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.308-312
• /
• 2001

This study was conducted to investigate the characteristics of yogurt prepared with different mixing ratios of 'Jinpum ' bean and sword bean(Canavalin gladiata). The crude protein content of 'Jinpum' bean used raw material was 38.0%, whereas that of sword bean was 27.5%. The pH and sugar content of ferment solution were deceased significantly up to 4 hours after strain inoculation but reduced slowly artier 8 hours. The content of organic acid and lactic ferments were increased. After 20 hours fermentation there was no significant differences between yogurt processed with 100% 'Jinpum' bean and yogurt processed with 95% 'Jinpum' bean and 5% sword bean. The number of lactic acid bacteria in yogurt processed with 95% 'Jinpum' bean and 5% sword bean was increased up to 20 hours but thereafter was decreased rapidly, showing the similar values compared to that of yogurt processed with 100% 'Jinpum' bean. The color values of yogurt processed with 95% 'Jinpum' bean and 5% sword bean artier 20 hours fermentation were similar to that of yogurt processed with 100% 'Jinpum' bean whereas those of yogurt processed with 90% 'Jinpum' bean and 10% sword bean were no little difference before and after fermentation. In the result of sensory test of yogurt prepared with 95% 'Jinpum' bean and 5% sword bean, adding strawberry syrup was more preferred than apple syrup.