• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.139-146
• /
• 2019

The purpose of this study is to propose the building design guideline considering photovoltaic panel installation through the analysis of relevant guidelines from home and abroad in terms of building design and solar panel installation. Conclusions can be summarized as followings; Considerations in building design : selection of the site with high solar accessibility, avoidance of the shade from the adjacent building & trees, south facing orientation of solar panel in building design, removal of shade on the solar panel from the part of building itself, load consideration of solar panel & fixing materials, safe passage securement for solar system maintenance, and planning of piping and mechanical room for solar system. Considerations in solar panel installation : harmonizing of solar panel with surrounding environment, unity of solar panel orientation & slope, regular maintenance of solar system, (in case of flat roof installation) solar panel installation afloat over the roof, installation area within the roof floor, and lower than parapet height, (in case of sloped roof installation) solar panel installation parallel with the roof slope, ventilation space securement below the panel, installation area within the roof surface, and similar material installation in empty space.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.5
• /
• pp.117-124
• /
• 2019

When manufacturing concrete, several mineral admixture is added to improve the basic physical property and durability and to make economical concrete. Such mineral admixture includes fly ash, granulated blast furnace slag, silica fume, etc., and not only the studies about mixing these mineral admixtures but also the studies for the development of new materials have been steadily in progress. Recently, some researchers have found, as a part of the development of new materials, the rice straw ash can also be used as a pozzolanic material for concrete considering similar chemical properties of rice straw ash to that of rice husk ash. But there has been insufficient amount of study about it. So, this study was to investigate the possibility as mineral admixture of agriculture by-product, by analyzing properties of concretes using rice straw ash with replacement ratio in comparison with other mineral admixture. In order to measure amount of SiO2 of rice straw ash, XRF(X-ray fluorescence) analysis was tested. For the measure pozzolanic reaction of rice straw ash, pH change and color change was tested according to curing day. Also to evaluate properties of concrete using rice straw ash, slump test, air contents test and compressive strength was tested.

• Journal of Applied Biological Chemistry
• /
• v.63 no.4
• /
• pp.335-338
• /
• 2020

Artemisia iwayomogi (Compositae), a perennial mugwort, is native to Korea and widely distributed in Japan, Russia, and China. A. iwayomogi and A. capillaris are similar in morphology and pharmacological activity and have been used for the same medicinal purposes in Korea. While various ingredients such as coumarins and flavonoids and their activity studies have been reported for A. capillaris, few studies have been conducted on the pharmacologically active components of A. iwayomogi. In Korea, A. capillaris is not economical because only young leaves are used as a medicinal material. Because of this, A. iwayomogi is frequently used in Korea, indicating the need to study its pharmacologically active components. Therefore, a phytochemical study was initiated to isolate active compounds from the aerial parts of A. iwayomogi. Finally, four coumarins, umbelliferone (1), esculetin (2), grevillone (3), and scoparone (4) were isolated for the first time from the aerial parts of A. iwayomogi in this study.

• Advances in concrete construction
• /
• v.11 no.2
• /
• pp.141-149
• /
• 2021

This study is a basic research for evaluating the buildability of cementitious materials for three-dimensional (3D) printing. In the cement paste step, the thixotropy behavior according to the resting time, which represents the time interval between each layer, was analyzed. In addition, the relationship between the thixotropy behavior and 3D concrete printing buildability was derived by proposing a measurement method that simulates the 3D concrete printing buildup process. The analysis of the tendency of the thixotropy behavior according to the resting time revealed that the area of the hysteresis loop (AHyst) showed a tendency to increase and then converge as the resting time increased, which means hysteresis loop approach critical resting time for sufficient buildability. In the thixotropy behavior analysis that simulates the 3D concrete printing buildup process, the buildup ratio, which is the recovery rate of the shear stress, showed a tendency to increase and then converge as the resting time increased, which are similar results like hysteresis loop. It was concluded that AHyst and the buildup ratio can be used as parameters for determining the resting time, and they have close relationships with 3D concrete printing buildability.

• Mycobiology
• /
• v.49 no.1
• /
• pp.24-45
• /
• 2021

The occurrence of Austroboletus subflavidus and Fistulinella gloeocarpa is documented from the Dominican Republic. The latter species is reported for the first time outside its original locality in Martinique, extending the geographic range for this uncommon pinkish-spored bolete. A detailed morphological description is provided for each species and accompanied by color pictures of fresh basidiomes in habitat and line drawings of the main anatomical features. Both species represent independent lineages within their respective genera based on phylogenetic inference. In addition, A. subflavidus clusters in a sister lineage to the core Austroboletus clade (Austroboletus clade I) here named as Austroboletus clade II. In order to confirm the accuracy of species identification, their identity and relationships were subjected to multilocus phylogenetic analyses of three gene markers (ITS, nrLSU, RPB2) including genetic material already available in public databases. Austroboletus subflavidus is a widely distributed species in North and Central America, whereas F. gloeocarpa is apparently highly localized and seems to appear sparingly in the Dominican Republic, Martinque, and southern Florida. Comparisons with morphologically similar and molecularly inferred allied species are also presented and discussed.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.87-95
• /
• 2021

In this study, seven companies(A~G) designated as new construction technology selected and evaluated KS F 2622: Method of test for performance evaluation of membrane roofing systems that are similar to field application conditions. As a result of the test, it was confirmed that although all test specimens exceeded KS standards in the basic physical, it was difficult to obtain field quality performance in weak areas such as joints and vertical parts of the adhesive coating method in water-tightness, sagging resistance, swelling resistance tests except for fatigue(crack behavior) tests.

• Architectural research
• /
• v.24 no.2
• /
• pp.29-40
• /
• 2022

The transition from manufacturing to service-based economies in highly developed societies during the post-industrial period resulted in the decline of the industrial landscape, leaving it abandoned or underutilized. In pursuit of revitalizing the obsolete industrial space, innovative design techniques based on adaptive reuse are applied to retrofit modern functions to create a new cultural space and preserve the historical, symbolic, and cultural importance of the abandoned industrial facilities. Design considerations based on facade redesign have proven to be one of the most adopted techniques that can help in recreating a new function for the vacant industrial buildings and integrating them into the present-day urban fabric. This paper examines the facade renovation elements used for the adaptive reuse of 15 abandoned industrial buildings presently used as multi-purpose facilities in South Korea. Through a questionnaire survey, this study analyzes the respondents' preference for different facade renovation elements in the 15 sites according to age and gender. The study found that both genders showed similar preference patterns between most elements. But on some elements, females were keener and expressed a stronger opinion than males. There were much more females than males who perceived color and material as the most important exterior elements. The findings of this study can be used for the adaptive reuse of industrial buildings according to user preferences for different facade renovation elements.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.690-696
• /
• 2021

The purpose of this study is to develop a zirconium-based alloy with low modulus and magnetic susceptibility to prevent the stress-shielding effect and the generation of artifacts. Zr-7Cu-xSn (x = 1, 5, 10, 15 mass%) alloys are prepared by an arc melting process. Microstructure characterization is performed by microscopy and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness and compression test. The magnetic susceptibility is evaluated using a SQUID-VSM. The average magnetic susceptibility value of the Zr-7Cu-xSn alloy is 1.176 × 10^-8 cm³g^-1. Corrosion tests of zirconium-based alloys are conducted through polarization test. The average Icorr value of the Zr-7Cu-xSn alloy is 0.1912 ㎂/cm². The elastic modulus value of 14 ~ 18 GPa of the zirconium-based alloy is very similar to the elastic modulus value of 15 ~ 30 GPa of the human bone. Consequently, the Sn added zirconium alloy, Zr-7Cu-xSn, is very interesting and attractive as a biomaterial that reduces the stress-shielding effect caused by differences of elastic modulus between human bone and metallic implants. In addition, this material has the potential to be used in metallic dental implants to effectively eliminate artifacts in MRI images due to low magnetic susceptibility.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.6
• /
• pp.1004-1016
• /
• 2021

This study aims to derive the design requirements for functional clothing worn with military wearable robots using a survey of people with military experience. Specifically, 982 adult males with military and muscular exercise experience were surveyed for their demands for the clothing worn with wearable robots during military activities. The study showed that it is necessary to develop functional clothing worn inside robots suitable for frequent movements of soldiers to improve their comfort level of wearable robots. The surveyed soldiers indicated that they preferred the top and bottom clothing with high-pressure levels because the upper body felt fatigued during transportation, while both the upper and lower body got exhausted during marches. The survey of design requirements revealed that the participants preferred a top with long sleeves and a bottom with ankle-length leggings in color similar to current military uniforms. We conclude that it is important to design functional clothing worn inside wearable robots in different forms depending on frequent movements, e.g., with differentiated pressures and material placements.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.11-18
• /
• 2022

In this research, curium oxide (CmO₂) is studied as fuel for VVER-1200 reactor to get an attention to its energy value and possibilities. For this purpose, CmO₂ is used in fuel rods or integrated burnable absorber (IBA) rods with and without UO₂ and then compared with the conventional fuel assembly of VVER-1200 reactor. It is burned to 60 GWd/t by using SRAC-2006 code and JENDL-4.0 data library. From these studies, it is found that CmO₂ is competent like UO₂ as a fuel due to higher fission cross-section of ²⁴³Cm and ²⁴⁵Cm isotopes and neutron capture cross-section of ²⁴⁴Cm and ²⁴⁶Cm isotopes. As a result, when some or all of the UO₂ of fuel rods or IBA rods are replaced by CmO₂, we get a similar k-inf like the reference even with lower enrichment UO₂ fuels. These studies show that the use of CmO₂ as IBA rods is more effective than the fuel rods considering the initially loaded amount, power peaking factor (PPF), fuel temperature and void coefficient, and the quality of spent fuel. From a detailed study, 3% CmO₂ with inert material ZrO₂ in IBA rods are recommended for the VVER-1200 reactor assembly from the once through concept.