• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.74-79
• /
• 1999

Langasite($La_3Ga_5SiO_14$) is a new piezoelectric material which is similar to quartz, LN($LiNbO_3$) and LT($LiTaO_3$) in its acoustic behavior. In this study, pure Langasite and Lagnasite family groups were synthesized by the solid state reactions in air. The diffusion species for synthesis were investigated and the sintered body was studied on dielectric property to comparison of characteristics. Also, Langasite single crystals were grown by self-designed Czochralski system and characterized.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.165-171
• /
• 2016

A prosthetic knee for above-knee (AK) amputee is categorized into passive and active type. The passive prosthetic knee is generally made by elastic material. Although AK amputee can easily walk by using passive prosthetic leg, knee joint motions are not similar to ordinary persons. The active prosthetic leg can control the knee angle owing to the actuator and microprocessor. However, the active type is not cost-effective and the stability may be lost due to the malfunction of sensors. In order to resolve these disadvantages of passive and active type, a semi-active prosthetic knee which can control the knee angle is proposed in this work. The proposed semi-active one requires a less input energy but provides active type performance. In order to achieve this goal, in this work, a semi-active prosthetic knee using magneto-rheological (MR) damper for AK amputees is designed. The MR damper can support the weight of body by using less energy than actuator of active prosthetic. It can control knee angle by inducing the magnetic field at the time of stance phase. This salient characteristic is evaluated and presented in this work.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.6
• /
• pp.317-328
• /
• 2016

Over the past few decades, CMOS current comparators have been used in a wide range of applications, including analogue circuits, MVL (multiple-valued logic) circuits, and various electronic products. A current comparator is generally used in an ADC (analog-to-digital) converter of sensors and similar devices, and several techniques and approaches have been implemented to design the current comparator to improve performance. To this end, this paper presents a bibliographical survey of recently-published research on different current comparator topologies for low-power and high-speed applications. Moreover, several aspects of the CMOS current comparator are discussed regarding the design implementation, parameters, and performance comparison in terms of the power dissipation and operational speed. This review will serve as a comparative study and reference for researchers working on CMOS current comparators in low-power and high-speed applications.

• Steel and Composite Structures
• /
• v.34 no.3
• /
• pp.361-376
• /
• 2020

This paper presents a free vibration analysis of shell panels made of functionally graded material (FGM) in the form of the ordinary and sandwich FGM and laminated shells using the isogeometric B3-spline finite strip method (IG-SFSM). B3-spline and Lagrangian interpolation are employed along the longitudinal and transverse directions respectively in this type of finite strip. The introduced finite strip formulation is based on the degenerated shell method, which provides variable thickness, arbitrary geometries, and analysis of thin or thick shells. Validity of the obtained natural frequencies by IG-SFSM is checked by comparison with results extracted from references for similar cases in different examples. These examples incorporate several geometries, materials, boundary conditions, and continuous thickness variation. A comparison of these two kinds of results and their proximity showed that the introduced IG-SFSM is a reliable tool which can be used in analysis of shells with the aforementioned properties.

• Korean Journal of Acupuncture
• /
• v.34 no.3
• /
• pp.136-145
• /
• 2017

Objectives : Previous research on texts specializing in acupuncture and moxibustion in Korea have mostly been focused on those written in the Joseon period, leaving an academic void in the modern and contemporary eras. This research on the "Yeongsochimgugyeong" was undertaken to help readers' understanding of the text and to provide basic material for further research on modern-contemporary education of acupuncture and moxibustion. Methods : The original text of "Yeongsochimgugyeong" was examined along with books and news articles on related people. Information that was difficult to obtain through written documents was supplemented by interviews with people who knew about the situation at the time. The findings were organized as 1) the author and related people and 2) introduction of "Yeongsochimgugyeong". Results and Conclusions : The original text of "Yeongsochimgugyeong" was written by teacher Jeon, Gwangok, interpreted and annotated by his disciple Gwon, Yeongjun. It is presumed that they wrote this book as educators of Korean medicine for educational purposes on acupuncture and moxibustion before and after the Japanese colonial era. The book is consisted of an overview of meridianology, details on points and meridians, supplementing and draining methods, similar to the current text book. The contents and expressions of "Yeongsochimgugyeong" reflect the state of acupuncture and moxibustion education of the early and mid $20^{th}$ century, making it a valuable resource.

• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1203-1215
• /
• 2016

When strain sensing cables are under long-term stress and cyclic loading, creep may occur in the jacket material and each layer of the cable structure may slide relative to other layers, causing fatigue in the cables. This study proposes a device for testing the fatigue characteristics of three types of cables operating under different conditions to establish a decay model for observing the patterns of strain decay. The fatigue characteristics of cables encased in polyurethane (PU), GFRP-reinforced, and wire rope-reinforced jackets were compared. The findings are outlined as follows. The cable strain decayed exponentially, and the decay process involved quick decay, slow decay, and stabilization stages. Moreover, the strain decay increased with the initial strain and tensile frequency. The shorter the unstrained period was, the more similar the initial strain levels of the strain decay curves were to the stabilized strain levels of the first cyclic elongation. As the unstrained period increased, the initial strain levels of the strain decay curves approached those of the first cyclic elongation. The tested sensing cables differed in the amount and rate of strain decay. The wire rope-reinforced cable exhibited the smallest amount and rate of decay, whereas the GFRP-reinforced cable demonstrated the largest.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.1
• /
• pp.148-157
• /
• 2017

Miniature guided-bullet is an advanced military technology of developing guided missile which is designed to hit a target precisely while having easily carriable miniature size. A key issue of developing such system involves size reduction of the original guided missile system, and this in turn arouses stiffness issue regarding small and thin sized control surface. In this study, procedures on how to calculate the critical flutter speed of special type of control surface with the change of its dimension or material property is arranged. During this procedure, design parameters related to critical flutter speed are abridged to help preliminary design of similar structure even faster than time-consuming, and cumbersome computer analysis.

• Journal of the Society of Disaster Information
• /
• v.3 no.2
• /
• pp.79-93
• /
• 2007

With international urgence of terror situation, many methods of terror techniques and skills are appearing and more intense and threatening terror is braking out not only in the air(plane), but also in the sea(ship). Korea is surrounded by 3 sides of sea and is a proud maritime nation that should advance to foreign country through the sea because South Korea and North Korea are confronting. Korea depend on the maritime transportation, 99.7% of exporting, importing material resources. Therefore, acquisition of the marine safety has the great affect on national security and economical life. On the high tension of situation about threat and possibility of maritime terroism, the potential ways of the improvement policy for counter-tactics against big maritime terror are the following. First, we should construct clear and well-organized network for accurate information about maritime terrorism Second, we should have the information of all domestic, foreign passenger's ships Third, national important facilities such as atomic energy plant, thermo-electric power plant, shipyard need policies to manage all emergency situation Fourth, government authorities should improve tactic abilitities by competing with support and budget inside of nation as well as outside of nation. To develop big maritime terror of our country, we will have to hold cooperative training & tactics contest of big maritime terror by cooperating educational industry organization with similar institute, improve the ability of members of big terror and acquire tactics information by excavating and exchanging a new technique through tactics seminar and public hearing.

• Advances in Computational Design
• /
• v.2 no.1
• /
• pp.43-56
• /
• 2017

The aim of this paper is to develop software for designing of steel reinforced elastomeric isolator (SREI) according to American Association for State Highway and Transportation Officials Load and Resistance Factor Design (AASHTO LRFD) Specifications. SREI is used for almost all bridge types and special structures. SREI-structures interface defines support boundary conditions and may affect the seismic performance of bridges. Seismic performance of the bridge is also affected by geometrical and materials properties of SREI. The selection of SREI is complicated process includes satisfying all the design constraints arising from code provisions and maximizing performance at the lowest possible cost. In this paper, design stage of SREI is described up to AASHTO LRFD 2012. Up to AASHTO LRFD 2012 analysis and design program of SREI performed different geometrical and material properties are created with C# object-oriented language. SREI-CAD, name of the created software, allows an accurate design for economical estimation of a SREI in a short time. To determine types of SREI effects, two different types of bearings, rectangular and circular with similar materials and dimension properties are selected as an application. Designs of these SREIs are completed with SREI-CAD. It is seen that ensuring the stability of circular elastomer bearing at the service limit state is generally complicated than rectangular bearing.

• The Korea Journal of Herbology
• /
• v.22 no.2
• /
• pp.109-114
• /
• 2007

Objectives : A morphological classification among Sinomenium acutum, Cocculus trilobus and Aristolochia fangchi was made through microscopic observation. Method : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Result : 1. Fiber bundles of pericycle in S. acutum are like a crescent moon, stone cells were found among fiber bundles, and starch grain and raphides of calcium oxalate were included in parenchyma. 2. C. trilobus has the fiber bundle of pericycle resembling a crescent moon, but does not have the raphidesof calcium oxalate. 3. A. fangchi has the raphides of calcium oxalate, but does not have the fiber bundles of pericycle. 4. Stems and roots of S. acutum arc mostly similar, but only stems have the pith. Conclusion :' C. trilobus and A. fangchi can be distinguished from each other by the fiber bundles of pericycle and the raphides of calcium oxalate.