• Structural Engineering and Mechanics
• /
• 제45권1호
• /
• pp.129-144
• /
• 2013

Load-carrying capacity of combined members consisted of inner and sleeved tubes subjected to axial compression was investigated in this paper. Considering the initial bending of the inner tube and perfect elasto-plasticity material model, structural behavior of the sleeved member was analyzed by theoretic deduction, which could be divided into three states: the elastic inner tube contacts the outer sleeved tube, only the inner tube becomes plastic and both the inner and outer sleeved tubes become plastic. Curves between axial compressive loads and lateral displacements of the middle sections of the inner tubes were obtained. Then four sleeved members were analyzed through FEM, and the numerical results were consistent with the theoretic formulas. Finally, experiments of full-scale sleeved members were performed. The results obtained from the theoretical analysis were verified against experimental results. The compressive load-lateral displacement curves from the theoretical analysis and the tests are similar and well indicate the point when the inner tube contacts the sleeved tube. Load-carrying capacity of the inner tube can be improved due to the sleeved tube. This paper provides theoretical basis for application of the sleeved members in reinforcement engineering.

• 한국통신학회논문지
• /
• 제31권3C
• /
• pp.264-270
• /
• 2006

In this paper, we propose the modified display color control system using white point line, boundary lines and S-shaped curves to emphasize blue and red tone colors on CIE1931 diagram. The proposed system divides RGB gamut into movable area and non-movable area by using boundary lines. The colors in movable area are moved into right side or left side along quadratic curve to change the bluish (or reddish) color to more bluish (or more reddish), while those in non-movable area are excepted from color control to prevent skin color from changing. The loci of the quadratic curves are very similar to the arc of the white-point line which connects all points that represent the chromaticities of a black body radiator at different temperatures and is also called the black body locus. The RGB gamut extension by movement of chromaticity coordinate can improve color reproducibility. Therefore in the case of application to LCD, the display shows excellent performance because the LCD's color reproducibility is comparatively lower than that of other display systems. The proposed system is also experimentally demonstrated with Xilinx Virtex FPGA XCV2000E- 6BG560 and the TV set.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2002년도 춘계학술발표논문집
• /
• pp.76-84
• /
• 2002

Fracture toughness was considered as one of the good estimates of the paper break tendency of paper web in the press room. Paper break on the paper machine is caused by many factors such as paper machine irregular vibrations, impurities in the fiber furnish, shives, and so on. On the paper machine, the solid content of paper web is changing very rapidly from less than 1% to over 95%. We tried to measure the fracture toughness of paper web at different solid contents for providing the fundamental knowledge of paper break. Stretches of wet web were also measured and compared to the fracture toughness changes. Four different fiber furnishes (SwBKP, HwBKP, ONP, and OCC) were refined to different degrees, and at different solid contents (40%, 60%, 80%, and 95%), their fracture toughnesses were measured. Two fracture toughness measurement methods (essential work of fracture and Tryding's load-widening method) were used, and we found they gave identical results. The stretch curves of the wet webs against the axis of solid contents were very similar to the fracture toughness curves of those.

• 한국지진공학회논문집
• /
• 제24권3호
• /
• pp.141-148
• /
• 2020

For the important safety system, two or more units of identical equipment or redundant components with similar function were installed to prevent abnormal failure. If the failure probability of such equipment is independent, this redundancy could increase the system safety remarkably. However, if the failure of each component is highly correlated by installing in a structure or experiencing an earthquake event, the expected redundancy effect will decrease. Therefore, the seismic correlation of the equipment should be evaluated quantitatively for the seismic probabilistic safety assessment. The correlation effect can be explained in the procedure of constructing fragility curves. In this study, several methodologies to quantify the seismic correlation in the failure probability calculation for multiple components were reviewed and two possible ways considering the realistic situation were selected. Simple examples were tested to check the applicability of these methods. The conversion method between these two methods was suggested to render the evaluation using the advantages of each method possible.

• 센서학회지
• /
• 제26권6호
• /
• pp.402-407
• /
• 2017

Characteristics of various material surface plasmon resonance (SPR) chips were investigated in angular interrogation mode and intensity interrogation mode. Among five metals, silver (Ag), gold (Au), copper (Cu), chromium (Cr) and titanium (Ti), three metals, Ag, Au and Cu were paid attention to since their characteristics can be easily analyzed in angular interrogation mode by investigating the change of their reflectance curves according to refractive index change from 1.331 to 1.335. Most of SPR chips with various configurations showed the similar property in angular interrogation mode. The application of the SPR chip made of Ag, Au and Cu or their combinations depends on their reflectance properties. In intensity interrogation mode, the operation range may be limited since the variation of the intensity was not linearly related to refractive index change ranging from 1.331 to 1.335. However, the SPR chip containing high ratio of Ag may be applicable to high sensitive detection due to their sharp reflectance curves in intensity interrogation mode.

• 한국안전학회지
• /
• 제33권1호
• /
• pp.81-87
• /
• 2018

The seismic response, the natural frequencies and the mode shapes of an offshore wind turbine with twisted tripod substructure subject to various pile-ground interactions are discussed in this paper. The acceleration responses of the tower head by four historical earthquakes are presented as the seismic response, while the other loads are assumed as ambient loads. For the pile-ground interactions, the fixed, linear and nonlinear models are employed to simulate the interactions and the p-y, t-z and Q-z curves are utilized for the linear and nonlinear models. The curves are designed for stiff, medium and soft clays, and thus, the seven types of the pile-ground interactions are used to compare the seismic response, the acceleration of the tower head. The mode shapes are similar to each other for all types of pile-ground interactions. The natural frequencies, however, are almost same for the three clay types of the linear model, while the natural frequency of the fixed support model is quite different from that of the linear interaction model. The wind turbine with the fixed support model has the biggest magnitude of acceleration. In addition, the nonlinear model is more sensitive to the stiffness of clay than the linear pile-ground interaction model.

• 응용통계연구
• /
• 제33권5호
• /
• pp.541-553
• /
• 2020

Receiver operating characteristic (ROC) 곡선은 민감도와 특이도로 표현되며, ROC 곡선을 이용하는 최적분류점도 민감도와 특이도만을 반영하지만, 본 연구에서는 질병률과 효용을 추가하여 고려하는 기대효용함수를 연구한다. 특히 교차하는 ROC 곡선들의 area under the ROC curve (AUC) 값들이 유사한 경우에 특정한 부분의 부분 AUC를 비교해야 한다. 본 연구에서는 정의된 민감도 직선과 특이도 직선을 바탕으로 각각 높은 민감도와 특이도를 나타내는 부분 AUC를 제안한다. ROC 곡선들이 교차하고 동일한 AUC 값을 갖는 다양한 분포함수를 설정하여, 민감도 직선과 특이도 직선을 이용하여 구한 부분 AUC를 비교하면서 모형의 판별력을 향상시키는 방법을 제안한다.

• 한국물환경학회지
• /
• 제25권4호
• /
• pp.573-579
• /
• 2009

The performance of Rainfall-Runoff Forecasting System (RRFS), the watershed management model for the Geum river basin, is evaluated based on the agreement between the simulated and observed hydrographs and the behavioral characteristics of the flow-duration curves. As a result, the simulated hydrographs are well agreed with the observed ones except high flow discharges. It is inferred that most of the errors in the simulated hydrographs are due to the misestimation of agricultural water use in $2^{nd}$ quarter and the discrepancy of the peak discharges in $3^{rd}$ quarter. It is however judged that RRFS would give the reliable runoff hydrographs from the point of view of continuous model application. And simulated flow-duration curves and flow-duration coefficients are also similar to the observed ones except flood flow region. From the above result it is confirmed that the construction of Yongdam dam improves the state of flow-duration curve at the Gongjoo station.

• 자원환경지질
• /
• 제16권4호
• /
• pp.269-276
• /
• 1983

단순한 사각주형(四角柱型) 물체(物體)에 대한 3차원 표준곡선을 해석하였다. 이들 표준곡선은 쌍극자배치(雙極子配置)에 대하여 적분방정식을(積分方程式) 이용한 수치계산기술(數値計算技術)로 구하였다. 전도성(電導性) 물체에 대한 IP응답(應答)은 물체의 폭과 두께의 비율에 따라서 그 패턴이 달라진다. 주향(走向)길이가 쌍극자간격(雙極子間隔)의 6배 이상이 되면 2차원의 결과와 유사하다. 또한 주향(走向)길이가 길고, 폭이 쌍극자 간격의 4배이상이 되면 층구조(層構造)(1차원) 해석도 가능하게 된다. 한편, 측선(測線)이 주향방향(走向方向)을 따라서 물체의 중심으로부터 멀어지는 효과는 물체의 깊이가 지표로부터 깊어질 때와 비슷하게 나타난다. 물체가 측선하(測線下)에서 측선과 평행(平行)한 방향으로 이동하더라도 IP패턴에는 거의 영향을 미치지 않는다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1997년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 1997
• /
• pp.70-81
• /
• 1997

The intesity survery on the 26 June 1997 Kyeongju Earthquake whose magnitude is 4.3, has been made for 316 locations throughout southen park of Korean Peninsula, then we have investigated the intensities distribution of the earthquake. Because the earthquake was occurred during night time (03:50:23.19), the most people who live farather than about 200km from the epicenter did not feel the earthquake. Therefore, the intensities are estimated only from IV to V in this study. The iso-seismal intensity map shows that the shape of iso-seismal intensity is similar to the boundary of the Kyeongsang Basin. This phenomenon may indicates that the energy of the earthquake is trapped within the Kyeongsang Basin due to low velocity within the basin compared with the velocity outside of the basin. The travel time curves with 10 possible phases are used to identify the earquake records. The Pg and Sg phases are crearly shown in the records whose epicental distance is less than 60 km. The records of MUN and PCH stations located outside of the Kyiongsang Basin show different frequency compared with that of the other stations located within the Kyeongsang Basin.