• 한국동물위생학회지
• /
• 제26권3호
• /
• pp.221-225
• /
• 2003

In order to monitoring the chicken meat hygiene, 165 chicken samples were tested for contamination agents such as the total bacterial counts, coliform bacterial counts and falling bacterial counts. The prevalence of level on number of standard plate count, total bacterial counts in less than $10^3\;cfu/cm^2$, $10^3{\sim}10^4\;cfu/cm^2$ and $10^3-10^5\;cfu/cm^2$ was 30 samples(18.2%), 98 samples(59.4%) and 37 samples(22.4%), respectively. The coliform bacterial counts in less than $10^2\;cfu/cm^2$, $10^2{\sima}10^$\;cfu/cm^2$ and $10^3{\sim}10^4\;cfu/cm^2$ was 7 samples(42.2%), 66 samples(40.0%), 92 samples(58.8%), respectively. The falling bacterial counts in plants was higher 9.1 in summer, 8.4 in fall, 7.2 in spring and 6.7 in winter, in order.

• 열처리공학회지
• /
• 제25권3호
• /
• pp.126-133
• /
• 2012

Semi-solid forming of the high melting point alloys such as steel is a promising near-net shape forming process for decreasing manufacturing costs and increasing the quality of the final products. This paper presents the microstructure characteristics of SKH51 (high speed tool steel) during heating and holding in the mushy zone between $1233^{\circ}C$ and $1453^{\circ}C$, which has been measured by differential scanning calorimetry (DSC). The results of heating/holding experiments showed that the grain size and the liquid fraction increased gradually with temperature up to $1350^{\circ}C$. The drastic grain growth occurred at heating above $1380^{\circ}C$. The strain-induced melt-activated (SIMA) process has been applied to obtain globular grains in the billet materials. Working by mechanical upsetting and successive heating of SKH51 into the temperatures in the mushy zone resulted in globular grains due to recrystallization and partial melting.

• Advances in nano research
• /
• 제8권2호
• /
• pp.115-134
• /
• 2020

In this paper, the free vibrations analysis of the nanoplates made of three-directional functionally graded material (TDFGM) with small scale effects is presented. To study the small-scale effects on natural frequency, modified strain gradient theory (MSGT) has been used. Material properties of the nanoplate follow an arbitrary function that changes in three directions along the length, width and thickness of the plate. The equilibrium equations and boundary conditions of nanoplate are obtained using the Hamilton's principle. The generalized differential quadrature method (GDQM) is used to solve the governing equations and different boundary conditions for obtaining the natural frequency of nanoplate made of three-directional functionally graded material. The present model can be transformed into a couple stress plate model or a classic plate model if two or all parameters of the length scales set to zero. Finally, numerical results are presented to study the small-scale effect and heterogeneity constants and the aspect ratio with different boundary conditions on the free vibrations of nanoplates. To the best of the researchers' knowledge, in the literature, there is no study carried out into MSGT for free vibration analysis of FGM nanoplate with arbitrary functions.

• 한국정보통신학회논문지
• /
• 제17권8호
• /
• pp.1919-1925
• /
• 2013

본 논문은 스쿨존 영역의 교통 환경 분석을 위한 배경영상 추출 알고리즘을 제안하고 있다. 제안된 알고리즘은 교통 환경에서 수시로 발생되는 밝기 변화와 정지 객체에 의한 문제를 해결하고 있다. 전자를 위해 고속 Sigma-Delta 알고리즘을 이용해 배경영상을 현 프레임으로 고속 갱신하고, 후자를 위해 직전 프레임과 오랜 시간의 평균 배경영상을 이용해 동적 영역을 검출하여 정지 객체를 배경영상에서 배제한다. 실험 결과 제안된 알고리즘은 기존 알고리즘들과 비교하여 밝기 변화에 빠르게 잘 적응하고 있고, 배경영역의 SAD (Sum of Absolute Differences)를 약40~80% 정도를 줄여주고 있다.

• 비교문화연구
• /
• 제41권
• /
• pp.163-175
• /
• 2015

최근 전국시대(戰國時代) 고문자에 대한 연구가 활성화 되면서 당시 문자에 대해 좀 더 정확한 판독을 할 수 있게 되었으며, 이러한 성취를 바탕으로 다양한 전문서적이 발간되었다. 이러한 서적들은 최근 고문자연구의 성과를 종합 정리한 것이며, 더 나아가 해당 문자를 국가별로 분류하여 학술적 활용 가치가 매우 높다고 평가할 수 있다. 다만 일부 문자의 판독 및 국가 분류에 있어 보완 및 수정의 여지가 있는 곳이 일부 보이고 있다. 이 논문은 고새휘편(古璽彙編) 0024에 수록된 '사마지새(司馬之璽)' 인장(印章)을 연구 대상으로 하고 있다. 일반적으로 초(楚)나라 인장(印章)으로 분류하고 있지만, 제(齊)나라 또는 연(燕)나라 인장(印章)으로 분류하는 견해도 있다.

• Composites Research
• /
• 제32권5호
• /
• pp.296-300
• /
• 2019

2D 전이금속 탄화물(MXenes) 가운데, 타이타늄 기반의 $Ti_3C_2$는 뛰어난 전기전도성과 전기화학적 특성 및 표면작용기의 영향으로 이차 전지와 슈퍼캐패시터와 같은 에너지저장장치의 유망한 전극 물질로 각광받고 있다. 전극으로서 $Ti_3C_2$의 사용은 이온이 반응할 수 있는 표면적을 넓혀줄 뿐만 아니라, 이온의 확산 거리를 줄여주고, 전하의 운동을 향상시켜준다. 이 연구에서, 효율적으로 MAX phase로부터 $Ti_3C_2$를 합성하는 방법을 통해 리튬이온배터리에서 MXene기반의 전극 물질을 위한 새로운 방향을 제시하고자 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.367-375
• /
• 2020

This paper presents an integrated analysis about dynamic performance of a Floating Offshore Wind Turbine (FOWT) OC4 DeepCwind with semi-submersible platform under real sea environment. The emphasis of this paper is to investigate how the wave mean drift force and slow-drift wave excitation load (Quadratic transfer function, namely QTF) influence the platform motions, mooring line tension and tower base bending moments. Second order potential theory is being used for computing linear and nonlinear wave effects, including first order wave force, mean drift force and slow-drift excitation loads. Morison model is utilized to account the viscous effect from fluid. This approach considers floating wind turbine as an integrated coupled system. Two time-domain solvers, SIMA (SIMO/RIFLEX/AERODYN) and FAST are being chosen to analyze the global response of the integrated coupled system under small, moderate and severe sea condition. Results show that second order mean drift force and slow-drift force will drift the floater away along wave propagation direction. At the same time, slow-drift force has larger effect than mean drift force. Also tension of the mooring line at fairlead and tower base loads are increased accordingly in all sea conditions under investigation.

• Imaging Science in Dentistry
• /
• 제43권3호
• /
• pp.191-196
• /
• 2013

Purpose: This study assessed the accuracy of linear and angular measurements on panoramic radiographs taken at different positions in vitro. Materials and Methods: Two acrylic models were fabricated from a cast with normal occlusion. Straight and $75^{\circ}$ mesially and lingually angulated pins were placed, and standardized panoramic radiographs were taken at standard position, at an $8^{\circ}$ downward tilt of the occlusal plane compared to the standard position, at an $8^{\circ}$ upward tilt of the anterior occlusal plane, and at a $10^{\circ}$ downward tilt of the right and left sides of the model. On the radiographs, the length of the pins above (crown) and below (root) the occlusal plane, total pin length, crown-to-root ratio, and angulation of pins relative to the occlusal plane were calculated. The data were subjected to repeated measures ANOVA and LSD multiple comparisons tests. Results: Significant differences were noted between the radiographic measurements and true values in different positions on both models with linear (P<0.001) and those with angulated pins (P<0.005). No statistically significant differences were observed between the angular measurements and baselines of the natural head posture at different positions for the linear and angulated pins. Conclusion: Angular measurements on panoramic radiographs were sufficiently accurate and changes in the position of the occlusal plane equal to or less than $10^{\circ}$ had no significant effect on them. Some variations could exist in the pin positioning (head positioning), and they were tolerable while taking panoramic radiographs. Linear measurements showed the least errors in the standard position and $8^{\circ}$ upward tilt of the anterior part of the occlusal plane compared to other positions.

• Advances in nano research
• /
• 제6권3호
• /
• pp.243-255
• /
• 2018

Polystyrene granules were combined with nanosilver to form a nanocomposite film. One-side migration was conducted to test into three food simulants (3% acetic acid, 10% ethanol and 95% ethanol) at $40^{\circ}C$ temperature on different period of time (2, 4, 6, 8 and 10 days). It was found that, among the simulants, the highest migration amount was obtained with 3% acetic acid, while the 95% ethanol revealed the least migration level. Diffusion coefficients of nanosilver particles into simulants were estimated by inverse simulation using experimental data of concentration variation in the simulants. The finite element method used to solve the mass transfer equation and the numerical results indicates the sameresponse with the experimental data. The numerical results confirmed that the highest diffusion coefficient for acetic acid 3% (1.82E-10 to $1.76E-9m^2\;s^{-1}$) and the lowest diffusion coefficient for ethanol 95% from 2 to 10 days were obtained, respectively. Also, results of diffusion coefficient - concentration relation showed, the diffusion coefficient had in direct correlation with time and concentration. The results indicated that, in the 3% acetic acid, due to the increasing of diffusion coefficient of silver nanoparticles, they are released faster and distributed uniformly.

• International Journal of Quality Innovation
• /
• 제6권3호
• /
• pp.173-189
• /
• 2005

A life-cycle assessment (LCA) is based on the attention given to the environmental protection and concerning the possible impact while producing, making, and consuming products. It includes all environmental concerns and the potential impact of a product's life cycle from raw material procurement, manufacturing, usage, and disposal (that is, from cradle to grave). This study assesses the environmental impact of the ultra pure water process of semiconductor manufacturing by a life-cycle assessment in order to point out the heavy environmental impact process for industry when attempting a balanced point between production and environmental protection. The main purpose of this research is studying the development and application of this technology by setting the ultra pure water of semiconductor manufacturing as a target. We evaluate the environmental impact of the Precoat filter process and the Cation/Anion (C/A) filter process of an ultra pure water manufacturing process. The difference is filter material used produces different water quality and waste material, and has a significant, different environmental influence. Finally, we calculate the cost by engineering economics so as to analyze deeply the minimized environmental impact and suitable process that can be accepted by industry. The structure of this study is mainly combined with a life-cycle assessment by implementing analysis software, using SimaPro as a tool. We clearly understand the environmental impact of ultra pure water of semiconductor used and provide a promotion alternative to the heavy environmental impact items by calculating the environmental impact during a life cycle. At the same time, we specify the cost of reducing the environmental impact by a life-cycle cost analysis.