• 제목/요약/키워드: silver treatment

검색결과 364건 처리시간 0.03초

이온빔 처리를 통한 은나노와이어 전극의 전기적 특성과 안정성 향상 (Improvement of Electrical Property and Stability of Silver Nanowire Transparent Electrode Via Ion-beam Treatment)

  • 정성훈;이승훈;김도근
    • 한국표면공학회지
    • /
    • 제50권6호
    • /
    • pp.455-459
    • /
    • 2017
  • The development of flexible transparent electrode has been paid attention for flexible electronics. In this study, we have developed transparent electrode based on silver nanowires with improved electrical property and stability through ion-beam treatment. The energetic particles of ion-beam could sinter junctions of each silver nanowires and etch out polyvinylpyrollidone(PVP) coated on silver nanowires. The sheet resistance of silver nanowire transparent electrode was reduced by 74%, and the resistance uniformity was increased about 3 times after exposure of ion beam. Moreover, the stability at $85^{\circ}C$ of temperature and 85% of relative humidity could be also improved.

Compomer와 Ketac Silver로 성견 상악 이개부 병소 충전시 조직반응에 미치는 영향 (Effects on the tissue reaction using compomer & Ketac Silver in the maxillary furcation in the beagle dogs)

  • 유제윤;임성빈;정진형;이종헌
    • Journal of Periodontal and Implant Science
    • /
    • 제33권4호
    • /
    • pp.705-715
    • /
    • 2003
  • Procedures for treatment of molar furcation invasion defects range from open flap debridement, apically repositioned flap surgery, hemisection, tunneling or extraction, to regenerative therapies using bone grafting or guided tissue regenerative therapy, or a combination of both. Several clinical evaluations using regenerative techniques have reported the potential for osseous repair of treated furcation invasions. Regenerative treatment of maxillary molars are more difficult due to the multiple root anatomy and multiple furcation entrances therefore, purpose of this study was to evaluated histologically compomer and Ketac Silver as a barrier in the treatment of a bi-furcated maxillary premolar. Five adult beagle dogs were used in this experiment. With intrasulcular and crestal incision, mucoperiostcal flap was elevated. Following decortication with 1/2 high speed round bur, furcation defect was made on maxillary premolar. 2 month later one premolar was filled with compomer and the other premolar was filled with Ketac Silver. After 4, 8 weeks, the animals were sacrificed by vascular perfusion. Tissue block was excised including the tooth and prepared for light microscope with H-E staining. Results were as follows. 1. Compomer & Ketac Silver restoration were encapsulated fine connective tissue. 2. In 4 weeks, compomer & Ketac Silver restoration slightly infiltrated inflammatory cells but not disturb the new bone or new cementum formation. 3. In 8 weeks, compomer & Ketac Silver restoration were less infiltrated iflammatory cell and encapsulated fine connective tissue. 4. Therefore, compomer & Ketac Silver filling to the grade III maxillary furcations with multiple root anatomy and multiple furcation entrances is possible clinical method and this technique is useful method for maxillary furcation involvement but it is thought that periodic maintenance should be needed

은나노 활성탄을 이용한 Loop Reactor에서 하수 2차 처리수 중의 오염물질 제거 및 소독 효과 (The pollutants removal and disinfection of secondary effluent from sewage treatment plant in loop reactor using silver nanoparticles coated on activated carbon)

  • 선용호
    • 상하수도학회지
    • /
    • 제30권4호
    • /
    • pp.361-367
    • /
    • 2016
  • Pollutants removal and disinfection effect of secondary effluent from final settling tank of sewage treatment plant of W city were investigated in Loop Reactor using ordinary granular activated carbon(GAC) and GAC coated with silver nanoparticles. The results showed that the removal efficiency of $COD_{Mn}$, T-N and T-P using GAC with silver nanoparticles were higher than using the ordinary GAC. The removal efficiency of T-P using GAC with silver nanoparticles is 45.4% and that of T-P using ordinary GAC is 30.9% in the same case of the input amount of 20 g/L of GAC. The total califorms is reduced according to increasing input amount of GAC with silver nanoparticles and ordinary GAC. The disinfection efficiency of total coliforms in case of GAC with silver nanoparticles is much higher than that in case of ordinary GAC. For all experiments using the silver nanoparticles, the total coliforms is under 26 cfu/mL and this shows very excellent disinfection effect.

Facile Preparation of Silver Nanoparticles and Application to Silver Coating Using Latent Reductant from a Silver Carbamate Complex

  • Kim, Kyung-A;Cha, Jae-Ryung;Gong, Myoung-Seon
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권2호
    • /
    • pp.505-509
    • /
    • 2013
  • A low temperature ($65^{\circ}C$) thermal deposition process was developed for depositing a silver coating on thermally sensitive polymeric substrates. This low temperature deposition was achieved by chemical reduction of a silver alkylcarbamate complex with latent reducing agent. The effects of acetol as a latent reducing agent for the silver 2-ethylhexylcarbamate (Ag-EHCB) complex and their blend solutions were investigated in terms of reducing mechanism, and the size and shape of silver nanoparticles (Ag-NPs) as a function of reduced temperature and time, and PVP stabilizer concentration were determined. Low temperature deposition was achieved by combining chemical reduction with thermal heating at $65^{\circ}C$. A range of polymer film, sheet and molding product was coated with silver at thicknesses of 100 nm. The effect of process parameters and heat treatment on the properties of silver coatings was investigated.

Assessment of Bacteria Removal Using Silver Ion Absorbed Ceramic Filter

  • Kim, Woo-Hang;Smith, James
    • 한국환경과학회지
    • /
    • 제21권8호
    • /
    • pp.901-907
    • /
    • 2012
  • The objective of this study was to evaluate bacteria removal ability of the metallic silver which was baked silver ion impregnated ceramic filter at heating condition. Silver leaking from baked ceramic filter was tested to sustain bacteria removal for a long time. Silver impregnated ceramic filter could remove E. coli completely at $10^{12}$ MPN/100ml to $10^{13}$ MPN/100ml of influent. However, ceramic filter without silver did not remove E. coli completely under the same condition. After baking, the silver impregnated ceramic filter almost didn't leak out the silver ion from filter. Photo of TEM (Transmission Electron Microscopy) showed that absorbed silver ions remained in ceramic filter after baking process and most of silver were less than 10 nm. According to the increase in the amount of silver in the ceramic filter, removal efficiencies of E. coli were increased but turbidity removal was decreased. It can be accounted that increased removal efficiency of E. coli was from disinfection of silver that is in the ceramic filter. Simulated concentrations of bacteria agree well with the observed experimental effluent concentration data. Moreover, first-order decay coefficients increased to 0.0034/min after silver was added in the ceramic filter. Increase of first-order decay coefficient proves that silver-added ceramic filter can remove bacteria easily.

Coated Conductor의 특성 및 미세조직에 미치는 고온열처리 영향 (Effects of High Temperature Heat Treatment on the Microstructure and Superconducting Property of HTS Coated Conductor)

  • 도민호;홍계원;이희균
    • Progress in Superconductivity
    • /
    • 제11권1호
    • /
    • pp.1-7
    • /
    • 2009
  • 고온초전도 CC를 다른 산소 분압에서 Ag과 YBCO의 녹는점 보다 낮은 온도에서 열처리시 CC의 특성에 미치는 영향을 실험하였다. 전류의 수송능력과 미세구조는 보호층인 Ag의 존재여부에 다양하게 영향을 미친다. Ag를 제거한 CC를 $850^{\circ}C$의 산소 분위기에서 2시간 동안 열처리 한 시편의 경우 CC의 임계전류의 특성에 영향을 미치지 않았다. 그러나 Ag를 제거하지 않은 CC를 $800^{\circ}C$의 산소 분위기에서 2시간 동안 열처리한 시편의 경우 임계전류가 140 A에서 8 A로 떨어지는 결과를 보였다. 또한, Ag을 제거하지 않은 CC를 1000 ppm 산소 분위기의 $800^{\circ}C$에서 2시간 동안 열처리한 시편의 경우 임계전류 값이 원래 $I_c$ 값의 $70{\sim}80%$의 임계전류 값이 나타났다. SEM 이미지와 XRD 회절 분석 결과 Ni과 Cr 원자들이 표면으로 확산되어 CC의 전류수송 특성에 영향을 미친다.

  • PDF

말초성안면신경마비(末稍性顔面神經痲痺)에 대한 SSP치료요법과 전침요법의 병행치료 효과 (Effect of Combined Silver Spike Point Therapy and Electroacupuncture on Patients with Peripheral Facial Paralysis)

  • 황지혜;이동건;이현진;조현석;김경호;김갑성
    • Journal of Acupuncture Research
    • /
    • 제24권4호
    • /
    • pp.69-80
    • /
    • 2007
  • Objective : This study was designed to evaluate the effect of combined Silver Spike Point Therapy and Electroacupuncture on symptoms with Peripheral Facial Paralysis. Methods: We investigated 112 cases of patients with Peripheral Facial Paralysis. The patients were divided into two groups. Group A and B were both treated with basic oriental medicine treatment including Electroacupunctre and Group B was treated with Silver Spike Point Therapy additionaly. We evaluated the tratment effect of each group by using Gross Grading System of House-Brackmann, Yanagihara's Unweighed Grading System before treatment, after 2weeks and 4weeks treatment and Changing Point -period from onset of Peripheral Facial Paralysis to the day which the change begins to be seen at the face-. Results: 1. In Changing point, two groups showed significant differences. 2. As a results of evaluation by using Gross Grading system of House-Brackmann, Yanagihara's Unweighed Grading System, treatment scores showed significant difference over time in each group. 3. After 4weeks treatment, Group B showed significant difference on Gross Grading system of House-Brackmann, Yanagihara's Unweighed Grading System compared with Group A. 4. After 2weeks and 4weeks treatment, the Improvement Indexes of Group B were higher than those of Group A and statistically significant. And after 2weeks and 4weeks treatment, Ratio of Group B on mean of Improvement Index was 1.47 times and 1.34 times as large as those of Group A. Conclusions : Combined Silver Spike Point Therapy on Peripheral Facial Paralysis was more efficacious than the only use of basic oriental treatment including Electroacupuncture.

  • PDF

액상환원법에 의한 저온 열처리용 Ag 나노분말의 합성 (Synthesis of Ag Nanopowder for Low Temperature Heat Treatment Prepared by Liquid Phase Reduction Method)

  • 이종국;최남규;송대성;양권승;서동석
    • 열처리공학회지
    • /
    • 제18권4호
    • /
    • pp.242-246
    • /
    • 2005
  • Silver nanoparticles were synthesized by liquid phase reduction method from aqueous silver nitrate solution and borohybride as a reduction agent. The morphology, particle size and shape were influenced by the reaction conditions such as the concentration of $AgNO_3$, a reduction agent and addition of surfactant. The particle size decreased with decreasing the concentration of silver nitrate and using a borohydride. The obtained Ag particles showed the spherical shape with the range of 10-20 nm.

은의 전해채취 및 전해정련을 통한 사진폐액의 처리에 관한 연구 (Studies on the Treatment of Photographic Wastewater by Electrowinning and Electrorefining of Silver)

  • 정원주;김동수;이화영
    • 한국물환경학회지
    • /
    • 제22권4호
    • /
    • pp.658-665
    • /
    • 2006
  • The removal characteristics of silver ion from waste photographic solution have been investigated by recovering silver electrochemically. Cyclic voltammetry for synthetic and actual wastewater which containing silver ion was investigated to understand its electrochemical behavior. For both synthetic and actual wastewater, the recovery of silver according to the electrowinning time was observed to be increased as the applied potential was raised. In addition, the applicable potential for the electrowinning of silver was found to be lower for synthetic wastewater compared with actual wastewater. As the temperature was increased, more silver was recovered for both wastewater, which indicated the electrowinning reaction was endothermic. The electrowinned silver was refined electrochemically to increase its purity and the variation of the purity of silver was examined according to the electrorefining potential.

은 용액 처리와 세탁 조건에 따른 면직물의 항균효과 (Antimicrobial Effects of Laundering and Colloidal Silver Treatment on a Cotton Fabric)

  • 정혜원;김미경
    • 한국의류산업학회지
    • /
    • 제7권3호
    • /
    • pp.333-338
    • /
    • 2005
  • We examined the antimicrobial effects of the cotton fabrics which were laundered at different conditions and treated with a colloidal silver solution using Staphylococcus aureus. Colloidal silver solution was made from commercial colloidal silver generator by electrolysis. The fabric which was innoculated and washed with water before drying had no more Staphylococcus aureus, but which was innoculated and dried before washing with detergent solution had lower reduction rate. The fabric washed with oxygen bleach did not have an antimicrobial effect, but rinsed with 0.07% fabric softener showed antimicrobial properties. The fabric rinsed with 0.7ppm colloidal silver solution had better antimicrobial effects. As the treating concentration of silver solution increased, the antimicrobial property of the fabric was increased. The fabric treated with 5% silver solution sustained reflectance and whiteness of untreated fabric. The colloidal silver treated fabric lost antimicrobial property after washing because nano-sized silver particles were located on uneven fiber surface without chemical bonding forces.