• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.6
• /
• pp.767-773
• /
• 2019

The thermal diffusion performance of the electronic device is a factor for evaluating the stability of the electronic device. Therefore, many of research have been conducted to improve the thermal characteristics of thermal interface materials, which are materials for thermal diffusion of electronic products. In this study, nano thermal grease was prepared by blending graphene, silver and copper nano powders into a thermal grease, a type of thermal interface materials, and the heat transfer rate was measured and compared for the purpose of investigating the improved thermal properties. As a result, the thermal properties were good in the order of graphene, silver and copper, which is thought to be due to the different thermal properties of the nano powder itself.

• Journal of Powder Materials
• /
• v.20 no.2
• /
• pp.120-124
• /
• 2013

This study is carried out to develop the new process for the fabrication of ultra-fine electrodes on the flexible substrates using superhydrophobic effect. A facile method was developed to form the ultra-fine trenches on the flexible substrates treated by plasma etching and to print the fine metal electrodes using conductive nano-ink. Various plasma etching conditions were investigated for the hydrophobic surface treatment of flexible polyimide (PI) films. The micro-trench on the hydrophobic PI film fabricated under optimized conditions was obtained by mechanical scratching, which gave the hydrophilic property only to the trench area. Finally, the patterning by selective deposition of ink materials was performed using the conductive silver nano-ink. The interface between the conductive nanoparticles and the flexible substrates were characterized by scanning electron microscope. The increase of the sintering temperature and metal concentration of ink caused the reduction of electrical resistance. The sintering temperature lower than $200^{\circ}C$ resulted in good interfacial bonding between Ag electrode and PI film substrate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1331-1334
• /
• 2004

The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties or from structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites), was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz～12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test showed little shielding effect.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.10 s.175
• /
• pp.121-128
• /
• 2005

The research on electromagnetic shielding has been advanced for military applications as well as for commercial products. Utilizing the reflective properties and absorptive properties of shielding material, the replied signal measured at the rear surface or at the signal source can be minimized. The shielding effect was obtained from materials having special absorptive properties and structural characteristics such as stacking sequence. Recently researchers studied the electromagnetic properties of nano size particles. In this research {glass fiber}/{epoxy}/{nano particle} composites(GFR-Nano composites) was fabricated using various nano particles, and their properties in electromagnetic shielding were compared. For the visual observation of the nano composite materials, SEM(Scanning Electron Microscope) and TEM(Transmission Electron Microscope) were used. For the measurement of electromagnetic shielding, HP8719ES S-parameter Vector Network Analyser System was used on the frequency range of 8 GHz${\~}$12GHz. Among the nano particles, carbon black and Multi-Walled Carbon Nano-Tube (MWCNT) revealed outstanding electromagnetic shielding. Although silver nano particles (flake and powder) were expected to have effective electromagnetic shielding due to their excellent electric conductivities, test results showed little shielding characteristics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.9
• /
• pp.1463-1471
• /
• 2009

Silver ions or silver nanoparticles have multi-functional properties. The cotton fabrics for providing multi-functional properties were treated with a nanosilver powder, UV-absorbers, and dimethyloldi-hydroxyethyleneurea (DMDHEU) alone and mixed solution. The physical properties, UV protection, antibacterial, and deodorizing properties of treated cotton fabrics were evaluated. The results were as a follows. The UV protection of cotton fabrics were increased by the application of a nanosilver and Uv-absorbers mixture. The UV protection of treated fabrics were improved by nanosilver/DMDHEU/UV-absorbers mixed solution. The wrinkle recovery properties of fabrics treated with DMDHEU and nanosilver improved. The stiffness of fabrics are decreased by a nanosilver/DMDHEU/UV-absorbers mixed solution. The antibacterial properties of the fabrics treated with nanosilver/DMDHEU/UV-absorbers mixed solution is 99.99%. The functional properties of cotton fabrics are shown to be better with aanosilver/DMDHEU/UV-absorbers mixed than treated with nanosilver alone.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.143-143
• /
• 2003

최근 생활수준 및 생활환경의 향상에 힘입어 청결 및 쾌적을 추구하는 것이 사회적 현상으로 나타나고 있다. 요즘처럼 현대화된 시대에 '왜 항균제가 필요한 것일까' 라는 자연스러운 의문이 발생하게 되지만 현실은 항균제를 이용한 다양한 항균제품, 항균가전제품, 항균가공 내ㆍ건자재 및 항상 신선한 선도를 유지할 수 있는 제품 등이 호황을 누리고 있는 것이 현실이며 그 시장 규모는 3,000억원을 상회하고 있다. 이러한 항균 가공제품이 호평을 받는 사회적 배경은 우리를 둘러싼 주변 삶의 경제환경 신장에 따른 쾌적성 추구와 밀접한 관련이 있을 것이다. 이처럼 항균기능이 부여된 제품이 호평을 받고 있음에도 불구하고 국내에서는 항균제품의 주 기능 역할을 하는 항균제에 대한 개발은 초기단계로 국내 시장에서 많은 연구가 이루어지고 있는 실정이다. 국내의 경우, 유기 항균제의 사용이 전체 사용량의 80%를 차지하고 있고, 제올라이트나 인산염을 무기 담체로 항균성 금속 이온(Ag, Zn)을 물리적으로 결합시킨 무기 항균제가 개발된 것이 최근의 기술 수준이다. 이러한 유기 항균제는 미생물의 번식을 억제 또는 사멸시키기 위한 것이지만, 생체의 피부 세포에도 영향을 줄 수 있는 피부 자극원의 하나로 그 사용이 점차로 제한되고 있다. 무기 항균제는 안정성이나 항균력에서는 유기항균제 보다는 뛰어나지만 가격(경제성)이나 색(Color), 사용성 (Application)측면에서는 여러 가지 문제를 나타내고 있다. 귀금속이므로 가격이 고가이며, 금속고유의 색으로 회귀하려는 플라즈몬 효과에 의해 색(Color)의 조절이 불가능, 분말형태이므로 지류에 첨가시키는 방법 등이 큰 문제로 부각되고 있다. 이 러한 문제점을 해결할 수 있는 기술이 나노기술이다 나노기술(Nano-Technology)은 물질을 분자, 원자단위에서 규명하고 제어하는 기술로서 원자, 분자를 적절히 결합시킴으로서 기존 물질의 변형, 개조는 물론 신물질의 창출을 가능케 하는 기술이다. 나노기술은 여러분야로 세분화되지만 그중 산업화에 가장 접목이 용이한 기술이 나노입자(Nano-Particle)제어 기술이며, 나노입자는 통상적으로 입자크기가 수 nm에서 100nm이하 크기의 넓은 표면적을 가진 콜로이드 상의 불균일 분산입자를 말한다. 나노입자(Nano-Particle)는 기존의 입자($\mu\textrm{m}$)보다 물리적 및 광학적 성질이 우수하고 그 자체의 기능면에서도 탁월하기 때문에 국내외의 여러 산업에서도 기존제품의 품질 향상 및 기능성부여, 기존 공정의 개선 및 생산 원단위 절감 등 경제적, 생산적인 측면을 고려하여 적합한 나노입자를 채택, 적용하고자 하는데 많은 노력을 기울이고 있다. 이에 천연 항생제로 알려진 Ag, 즉 항균 및 탈취, 전기적 기능이 우수한 은(silver, Ag)을 나노(nm) 입자희 제조하고 이와 더불어 이산화티탄(TiO2) 복합 분체를 제조하여 제조된 나노 입자 및 복합 분체를 사용함으로써 환경 친화적이며 다양한 용도로 활용 가능한 소재 개발에 연구 내용을 두고 있다. 본 연구를 통한 기대 효과로서 환경성 측면에서는 환경 친화적인 나노 입자의 제조로 기능성 나노 입자에 친 환경성을 부여하여 유기계 항균제 대체 효과를 발현하고 이를 제품에 적용함으로써 다양한 기능을 가진 신소재 제조에 있다. 또한 경제적인 측면에서도 고부가 가치의 제품 개발에 따른 새로운 수요 창출과 수익률 향상, 기존의 기능성 안료를 나노(nano)화하여 나노 입자를 제조, 기존의 기능성 안료에 대한 비용 절감 효과등을 유도 할 수 있다. 역시 기술적인 측면에서도 특수소재 개발에 있어 최적의 나노 입자 제어기술 개발 및 나노입자를 기능성 소재로 사용하여 새로운 제품의 제조와 고압 기상 분사기술의 최적화에 의한 기능성 나노 입자 제조 기술을 확립하고 2차 오염 발생원인 유기계 항균제를 무기계 항균제로 대체할 수 있다. 이와 더불어 안료의 형상 균일화 기술을 확보하여 가격 경쟁력 및 부가가치 향상을 기대할 수 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.735-738
• /
• 2003

Downsizing electronics requires precision position control with an accuracy of sub-micron order, which demands development of ultra-fine displacive devices. Piezoelectric transducer is one of devices transferring electric field energy into mechanical energy and being capable for fine displacement control. The transducer has been widely used as fine Position control device Multilayer piezoelectric actuator, one of typical piezo-transducer, is fabricated by stacking alternatively ceramic and electrode layers several hundred times followed by cofiring process. Electrode material should be tolerable in the firing process maintaining at ceramic-sintering temperatures up to $1100{\sim}1300^{\circ}C$. Ag-Pd can be used as stable electrode material in heat treatment above $960^{\circ}C$. Besides, adding small quantity ceramic powder allow the actuator to be fabricated in a good shape by diminishing shrinkage difference between ceramic and electrode layers, resulting in avoidance of crack and delamination at and/or nearby interface between ceramic an electrode layers. This study presents synthesis of nano-oxide-added Ag/Pd powders and its feasibility to candidate material tolerable at high temperature. The powders were formed in a co-precipitation process of Ag and Pd in nano-oxide-dispersed solution where Ag and Pd precursors are melted in $HNO_3$ acid.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.1
• /
• pp.70-76
• /
• 2017

To synthesize copper nanoparticle a thermal decomposition was adopted. And to solve the problem of surface oxidation of the synthesized copper powder an electroless Ag plating method was used. The size and shape of synthesized Cu nanoparticle were affected by the size of copper oxalate used as a precursor, reaction solvent, reaction temperature and amount of reducing agent. Especially reaction solvent is dominant factor to control shape of Cu nano-particle which can have the shapes of sphere, polygon and rod. In case of glycerol, it produced spherical shape of about 500 nm in size. Poly ethylene produced uniform polygonal shape in about 700 nm and ethylene glycol produced both of polygon and rod having size range between 500 and 1500 nm. The silver coated copper powder showed a high electrical conductivity.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.228-234
• /
• 2016

Copper nanoparticles attract much attention as substitutes of noble metals such as silver and can help reduce the manufacturing cost of electronic products due to their lower cost and good conductivity. In the present work, the chemical reduction is examined to optimize the synthesis of nano-sized copper particles from copper sulfate. Sodium borohydride and ascorbic acid are used as reducing and antioxidant agents, respectively. Polyethylene glycol (PEG) is used as a size-control and capping agent. An appropriate dose of PEG inhibits the abnormal growth of copper nanoparticles, maintaining chemical stability. The addition of ascorbic acid prevents the oxidation of nanoparticles during synthesis and storage. Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR) are used to investigate the size of the synthesized nanoparticles and the coordination between copper nanoparticles and PEG. For chemical reduction, copper nanoparticles less than 100 nm in size without oxidized layers are successfully obtained by the present method.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2012

In this experiment, we have manufactured thermal-curable silver pastes for direct printing. And to enhance conductivity, printability, adhesion and hardness during polymer direct-gravure prints, we have manufactured Ag pastes by adding variety of filter contents. Then we have investigated characteristics of rheology in paste according to the gravure printability and the properties of printed conductive patterns. Depending on a variety of Ag powder, there was a big difference in sharpness of printed pattern. And also by the use of carbon, there was a big difference in amount of solvent used, conductivity and in hardness. We could improve doctoring and the sharpness of a pattern by adding Ag paste in carbon particle, but as we have used nano-sized particle, there was an increase in the amount of solvent used and also we have found out that it gives a bad effect as adhesive and hardness becomes weaker. Even though Ag particle has the same spherical shape, the surface treatments could differ from one another. And by the appropriate choice and with the suitable combination of Ag powder, excellent printability and conductivity could be obtained.