• 한국재료학회지
• /
• 제11권11호
• /
• pp.941-946
• /
• 2001

Conductive microspheres with a density of 0.2 g/cc were fabricated by electroless silver plating for application to the light-weighted microwave absorbers. The silver plating was conducted with the variation of plating conditions (sensitizing condition, $AgNO_3$, concentration, amount of reducing agent). Specimens have very low electro-resistivity. Under an optimum processing condition, conductive microspheres with uniform silver plating layer can be produced. Rubber-sphere composites were fabricated and their microwave absorbing properties were measured by HP8722D Network Analyzer. It was found that the lower the electrical resistance of microsphere, the better the microwave absorbing properties. Feasibility of microwave absorbers using this microspheres can be demonstrated with the result of microwave reflection loss of -15 dB and thickness of 1.44 mm.

• 신재생에너지
• /
• 제8권1호
• /
• pp.18-23
• /
• 2012

The screen printing has been widely used to form silver electrodes in solar cell device due to their simplicity of process. However, the wavy and irregular surface which is believed to be originated from a screen mask mesh and thixotropic characteristics of paste on screen printing process is well-known to give a negative effect on solar cell efficiency. The dispensing method that the silver paste is extruded through micro nozzle under a moderate pressure and coated on substrate can form the silver electrode without any wavy surface. In this study, we optimize the composition of silver paste and develop paste blending condition based on the thixotropic behavior of paste. The optimized paste shows a large thixotropic loop area which is related to an aspect ratio of electrode line and has the viscosity of 40 $Pa{\cdot}s$ at 40 s-1. The electrode line we finally obtainis 67.2 ${\mu}m$ in width and has an aspect ratio of 0.277.

• 자원리싸이클링
• /
• 제17권5호
• /
• pp.60-65
• /
• 2008

고순도 동 제조를 위해 황산동 전해액중에 존재하는 은(Ag)을 제거하기 위한 기초연구를 실시하였다. 이온교환수지법, 활성탄 흡착법, 구리분말 및 세선을 이용한 치환법, CuS침전법 등을 이용하여 Ag제거에 대한 실험을 실시하였으며, 은(Ag)제거 반응에 영향을 미칠 수 있는 반응온도, 반응시간, 첨가량 등에 대해 고찰하였다. 이들 방법중 CuS 침전법과 Lewatit TP214를 이용한 이온교환수지 방법이 효과적이었는데 특히 Lewatit TP214를 사용한 경우 초기 동전해액중, Ag 농도가 10ppm서 0.1ppm 이하 수준까지 제거가 가능하였다.

• Composites Research
• /
• 제17권5호
• /
• pp.61-67
• /
• 2004

본 연구에서는 전자파 차폐용 도전성 개스킷 소재로 활용할 수 있는 은입자 충전 실리콘 복합 페이스트에 대한 전기전도성 및 응력-변형율 특성을 분석하였다. 불규칙한 구형의 은(Ag)입자와 상온습기경화형(RTV) 실리콘수지를 도입하여 복합 페이스트의 퍼콜레이션 농도(임계 농도)를 전기전도도 측정 결과로부터 결정하였다. 약 28%의 은입자 함량에서 퍼콜레이션 현상이 발생하였으며, 이 농도에서 급격한 감소를 보이는 은입자/실리콘 복합 페이스트의 체적 비저항, 인장강도 및 연신률의 특성 변화에 관하여 고찰하였다. 또한, 커플링제의 선택적 방법을 통해 퍼콜레이션 농도 이상으로 충전된 복합 페이스트의 응력-변형율 특성을 효과적으로 개선할 수 있음을 제시하여 주었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권16호
• /
• pp.6773-6779
• /
• 2014

Background: Nanotechnology opens new applications in many fields including medicine. Among all metallic nanoparticles, silver nanoparticles (silver NPS) have proved to be the most effective against a large variety of organisms including toxic cyanobacteria. Materials and Methods: Silver NPs were biosynthesized in vivo with different alga species namely, Spirulina piatensis, Chlorella vulgaris and Scenedesmus oh/iquus following two scenarios. First: by suspending a thoroughly washed algae biomass in 1 mM aqueous $AgN0_3$ solution. Second: by culturing them individually in culture media containing the same concentration of $AgN0_3$. Silver NPs were characterized using UV-Vis spectroscopy, transmission electron microscopy (TEM), energy dispersive analysis (EDX) and Fourier transform infra-red (FfIR) spectroscopy. The biosynthesized silver NPs were tested for cytotoxic activity against a cancer promoter cyanobacteruim Microcystis aeruginosa, considering effects on cell viability and chlorophyll content. Results: The surface plasmon band indicated the biosynthesis of silver NPs at ~400 nm. Transmission electron microscopy (TEM) revealed that the silver NPs had a mean average size below 100 nm. Energy-dispersive analysis X-ray (EDX) spectra confirmed the presence of silver element. FfIR spectral analyses suggested that proteins and or polysaccharides may be responsible for the biosynthesis of silver NPs and (-COO-) of carboxylate ions is responsible for stabilizing them. The toxic potentialities ofthe biosynthesized silver NPs against the cancer promoter cyanobacterium, Microcystis aeruginosa showed high reduction in viable cells count and the total chlorophyll content. Conclusions: The potential activity of the biosynthesized silver NPs from the studied algae species against Microcystis aernginosa cells is expected to be mainly mediated by the release of silver ions (Ag+) from the particle surface and bioactive compounds as indicated by FfIR analysis.

• Corrosion Science and Technology
• /
• 제22권3호
• /
• pp.201-213
• /
• 2023

Corrosion management of an aircraft and its engine relies on rinsing and cleaning using tap water. Few studies have reported effects of tap water species on corrosion behaviors of structural materials. In this study, a series of experiments were conducted based on the design of experiment. Solutions with different levels of chloride and sulfate ions were prepared using a full factorial design. Two structural materials (aluminum alloy and steel) were used for an alternate immersion test. Weight loss was then measured. In addition, a silver specimen was utilized as a sensor for chloride deposition measurement. The silver specimen was examined using the electrochemical reduction method, XPS, and SEM-EDS. Surface analysis revealed that levels of chloride and sulfate ions were sufficient for the formation of silver chloride and silver surface. Statistical analysis of weight loss and chloride deposition rate showed significant differences in measured values. Concentration of chloride ions greatly affected corrosion behaviors of structural materials. Sulfate ion hindered the adsorption reaction. These results emphasize the importance of controlling ion concentration of tap water used for cleaning and rinsing an aircraft.

• 한국콘텐츠학회논문지
• /
• 제16권2호
• /
• pp.387-397
• /
• 2016

본 연구의 목적은 실버세대를 대상으로 하는 그림동화책의 필요성과 특성을 학문적 고찰을 통해 실버세대를 위한 그림동화책의 디자인적 특성들을 실증적으로 제시한 것이다. 고령화 현상과 문헌정보학, 교육학, 문학치료학 등 문헌자료의 분석결과를 통해 그림동화책은 실버세대들의 심신건강에 도움이 된다는 결과를 얻게 되었지만 실버세대를 위한 동화책은 수요에 비해 부족한 것이 현실이다. 그러므로 실버세대를 위한 동화책 연구개발에 대한 이론적 근거가 절실하게 필요하다. 따라서 본 연구는 실버세대의 시각기관, 몸 기능, 심리적 요인 등 특성을 반영한 그림동화책의 개발이 필요함을 제언하면서 동시에 실버세대를 위한 동화책을 디자인 할 때 그림의 특징 요소 중 스토리내용, 그림(표현방법, 크기, 레이아웃, 구도, 색채), 타이포 등에서 실버세대들의 독서 장애에 대한 문제점을 해결하기 위한 실버세대의 특성에 맞춰진 세심한 주의가 필요함을 제시하였다. 또한 향후에는 실버세대를 대상으로 한 실증분석을 통해 실버세대를 위한 그림동화책의 구성에 적합한 디자인적 특성이 입체적인 분석 데이터를 연구함에 있어 선행 자료의 일부분으로 활용되길 기대한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권1호
• /
• pp.1-4
• /
• 2009

Mechanical and electrical properties of silver stabilizer layer of coated conductor, which as prepared with nano silver paste as starting materials, have been investigated, Nano silver paste was coated on a YBCO film by dip coating process at a diping speed of 20m/min. Coated film was dried in air and heat treated at $400{\sim}700^{\circ}C$ in an oxygen atmosphere. Adhesion strength between YBCO and silver layer was measured by a tape est(ASTM D 3359). Hardness and electrical conductivity of the samples were measured by pencil hardness test (ASTM D 3363) and volume resistance test by LORESTA-GP (MITSHUBISHD, respectively. The sample heat-treated at $500^{\circ}C$ showed poor adhesion 1B, but samples heat treated at higher than $600^{\circ}C$ showed enhanced adhesion of 5B. The silver layer heat-treated at $700^{\circ}C$ showed the high hardness value larger than 9 H, low volume resistance, surface resistance value as well as superior current carrying capacity compared to sputtered silver. SEM observations showed that a dense silver layer was formed with a thickness of about $2{\mu}m$. Dip coated silver layer prepared by using nano silver paste showed superior electrical and mechanical characteristics.

• 패션비즈니스
• /
• 제25권2호
• /
• pp.34-50
• /
• 2021

As silver surfers'(older people who are good at surfing the Internet) SNS use and influence increase, SNS shopping channels are also favored as the major means of contactless shopping. The study analyzed the trends in fashion styles corresponding to taste on the SNS shopping channels with silver surfer women as the target. Even though the shopping channel was for people in their 50s and 60s, most of the design factors focused on casual styles and young taste rather than the formal and mature image. The material, trim, and patterns reflected a retro or formal factor but were also reinterpreted as a young image to show the various forms. The characteristics of the women's fashion styles for silver surfers on the SNS shopping channels can be summarized as follows. First, they chose items that portrayed a young image regardless of their age. The colors, materials, and patterns of the products also helped to create a young image. Second, there was a tendency to pursue various casual items. Silver surfer women chose practical, casual items because of their active lifestyle. Third, retro items were reinterpreted as young and trendy. Silver surfer women showed their retro tastes but preferred practical clothing with young images.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.1-7
• /
• 2009

고온초전도 CC를 다른 산소 분압에서 Ag과 YBCO의 녹는점 보다 낮은 온도에서 열처리시 CC의 특성에 미치는 영향을 실험하였다. 전류의 수송능력과 미세구조는 보호층인 Ag의 존재여부에 다양하게 영향을 미친다. Ag를 제거한 CC를 $850^{\circ}C$의 산소 분위기에서 2시간 동안 열처리 한 시편의 경우 CC의 임계전류의 특성에 영향을 미치지 않았다. 그러나 Ag를 제거하지 않은 CC를 $800^{\circ}C$의 산소 분위기에서 2시간 동안 열처리한 시편의 경우 임계전류가 140 A에서 8 A로 떨어지는 결과를 보였다. 또한, Ag을 제거하지 않은 CC를 1000 ppm 산소 분위기의 $800^{\circ}C$에서 2시간 동안 열처리한 시편의 경우 임계전류 값이 원래 $I_c$ 값의 $70{\sim}80%$의 임계전류 값이 나타났다. SEM 이미지와 XRD 회절 분석 결과 Ni과 Cr 원자들이 표면으로 확산되어 CC의 전류수송 특성에 영향을 미친다.