• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1272-1278
• /
• 2011

This study was conducted to reclassify Cheongweon series based on the second edition of Soil Taxonomy and to discuss the formation of Cheongweon series distributed on broad continental alluvial plains. Morphological properties of typifying pedon of Cheongweon series were investigated and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon of Cheongweon series has dark grayish brown (2.5Y 4/2) silt loam Ap horizon (0~18 cm), dark grayish brown (2.5Y 4/2) silt loam BA horizon (18~30 cm), dark yellowish brown (10YR 4/6) silty clay loam Bt1 horizon (30~60 cm), strong brown (7.5YR 4/6) silty clay loam Bt2 horizon (60~91 cm), brown (10YR 4/4) silt loam BC horizon (91~104 cm), and mottled (7.5YR 4/6, and 7.5YR 5/2) silt loam C horizon (104~160 cm). The typifying pedon has an argillic horizon from a depth of 30 to 91 cm and a base saturation (sum of cations) of 35% or more at 125 cm below the upper boundary of the argillic horizon. It can be classified as Alfisol, not as Incceptisol. It has udic soil moisture regime, and can be classified as Udalf. Also that meets the requirements of Hapluadalf. It has anthraquic condition, and keys out as Anthraquic Hapludalf. That has fine silty textural family, and has mesic soil temperature regime. Therefore Cheongweon series can be classified as fine silty, mixed, mesic family of Anthraquic Hapludalfs, not as fine silty, mixed, mesic family of Fluvaquentic Epiaquepts.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.6
• /
• pp.472-477
• /
• 2009

This study was conducted to reclassify Bugog series based on the second edition of Soil Taxonomy : A Basic System of Soil Classification for Making and Interpreting Soil Surveys. Morphological properties of typifying pedon of Bugog series were investigated and physico-chemical properties were analyzed according to Soil Survey Laboratory Methods Manual. The typifying pedon of Bugog series has strong brown (7.5YR 4/6) loam Ap horizon (0~22 cm), brown (7.5YR 4/4) clay loam BAt horizon (22~41 cm), strong brown (7.5YR 4/6) silty clay loam Bt1 horizon (41~59 cm), strong brown (7.5YR 4/6) silty clay loam Bt2 horizon (59~78 cm), brown (7.5YR 4/4) silty clay loam Btx1 horizon(78~90 cm), and brown (7.5YR 4/4) Btx2 horizon(90~160 cm). That occurs on swale foot slope in area of mainly granite gneiss, granite, and schist rock materials. The typifying pedon has an argillic horizon from a depth of 22 to more than 160 cm and a base saturation (sum of cations) of less than 35% at 75 cm below the upper boundary of the fragipan. That can be classified as Ultisol, not as Alfisol. The pedon has udic soil moisture regime, and can be classified as Udult. That has a fragipan with an upper boundary within 100 cm of the mineral soil surface, and keys out as Fragiudult. Also that meets the requirements of Typic Fragiudult. That has 18% to 35% clay at the particle-size control section, and has mesic soil temperature regime. Bugog series can be classified as fine silty, mixed, mesic family of Typic Fragiudults, not as fine loamy, mixed, mesic family of Typic Fragiudalfs.

• Journal of Industrial Technology
• /
• v.31 no.B
• /
• pp.91-98
• /
• 2011

In this thesis, from the results of settlement measurement performed at the site where embankment earthwork was carried out on the ground consisting of highly plastic and silty soft soils interlayered with organic deposits, various methods of predicting the embankment settlement such as Hoshino's method, Asaoka's method, hyperbolic method, ${\sqrt{s}}$ method and Monden's method were used to investigate their applicability and the inverse method of finding the soil parameter related to consolidation was used to predict the consolidation behavior in the future. It was confirmed that reliable prediction of consolidation behavior under various conditions could be done to estimate soil parameter related to consolidation such as the consolidation index and consolidation coefficient by the inverse method of comparing the measured settlement with the predicted value by the settlement prediction methods.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.110-113
• /
• 2005

The objective of this study was to examine the effect of proposed permeable eobarrier system for removal of PCE from groundwater. The materials used for the natural geobarrier are gravel bean and silty clay. In addition, the effect of Pyeongtaek soil on PRB assessed in this experiments. It was observed that the adsorption of PCE in natural geobarrier system is eligible for real site. However, natural geobarrier system has various factors based on using materials. Therefore, more laboratory work is needed to study about permeable geobarrier.

• Geomechanics and Engineering
• /
• v.38 no.2
• /
• pp.157-164
• /
• 2024

This paper describes the general trends of the stress-strain behavior of Korean weathered soil prior to failure and behavior at failure under triaxial loading. The isotropically consolidated samples were tested in a testing device under monotonic undrained loading. Relative density, effective mean pressure and fine content were the factors varied in the experimental investigation. The test results were analyzed and their behaviors were interpreted within the framework of plasticity constitutive model for a weathered Korean silty sand. Possible physical bases for the proposed forms are discussed. Validation of the applied model using the laboratory results is also given.

• Geomechanics and Engineering
• /
• v.38 no.3
• /
• pp.307-317
• /
• 2024

To get a better understanding of the effect of drying-wetting cycles (DWC) on the mechanical behaviors of silty clay hiving different initial moisture content (IMC), the direct shear tests were performed on sliding band soil taken from a reservoirinduced landslide at the Three Gorges Reservoir area. The results indicated that, as the increasing number of DWC, the shear stress-displacement curves type changed from strain-hardening to strain-softening, and both the soil peak strengths and strength parameters reduced first and then nearly remain unchanged after a certain number of DWC. The effects of DWC on the cohesion were predominated that on the internal friction angle. The IMC of 17% is regarding as the critical moisture content, and the evolution laws of both peak shear strength and strength parameters presented a reversed 'U' type with the rising of the IMC. Based on it, a strength deterioration evolution model incorporating the influence of IMC and DWC was developed to describe the total degradation degree and degradation rate of strength parameters, and the degradation of strength parameters caused by DWC could be counterbalanced to some extent as the soil IMC close to critical moisture content. The microscopic mechanism for the soil strength caused by the IMC and DWC were discussed separately. The research results are of great significance for further understanding the water-weakening mechanicals of the silty clay subjected to the water absorption/desorption.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.3
• /
• pp.69-81
• /
• 1988

The Repeated Load Triaxial and Oedometer Tests to the weathered granite & silty clay soil have been fulfilled to investigate their dynarnic characteristics. The results obtained are summarized as follows ; 1. In the relation between the repeated triaxial compression and the oedometer test, the recoverable strain of weathered granite soil showed a tendency to decrease by the increase of the repeated loads number(N), and that of silty clay showed approximately constant values while the total strain increased continuously. 2. The changes of plastic strain was dependent to the level of deviator stress which is the most important element in the calculation of soil deformation under repeated load condition. And there was a significance of 10% between the level of stress and plastic strain. 3. When the soil was aimost dried or saturated to 100%, the deformation by the repeated loads was small. However the deformation showed peak around the saturation of 50%. 4. When the deformation was predicted by the repeated triaxial load tests of a laboratory, it is desirable to introduce the threshold stress concept in the calculation of deformation of subgrade of the pavement. 5. The improved design equation (Eq. 16) introducing the modulus of conversion(Fo), which is based on the Boussineq' s theory, is considered to be rational in the design of flexible pavement. From the above results, the deformation to the repeated traffic loads could be predicted by the repeated triaxial tests on the pavement materials or undisturbed soil layers, therefore it is think that the durable and econornic pavement could be constructed by reflecting that to the design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1159-1166
• /
• 2005

In the present study, a series of laboratory tests with sands of different silt contents, are conducted and methods to assess non-linear behaviors based on in-situ test results are proposed. Modified hyperbolic stress-strain model is used to analyze non-linearity of silty sands in terms of non-linear degradation parameters f and g as a function of silt contents and relative density $D_R$. Stress-strain relationship results were obtained from a series of triaxial tests on sands containing different amounts of silt. Initial shear modulus which was applied to normalize modulus degradation of silty sands were determined based on the resonant column test results. From the laboratory test results, it was observed that, as the relative density increases, values of f decrease and those of g increase. Cone resistance $q_c$ for silty soil condition used in the triaxial tests were estimated based on the cavity expansion analysis. A suggestion to make an estimation of degradation parameters f and g as a function of fine contents is addressed in terms of cone resistance $q_c$ .

• Journal of Ginseng Research
• /
• v.22 no.2
• /
• pp.122-125
• /
• 1998

Adequate available soil moisture level is considered to be one the most important components in growing high yields of good quality ginseng. Excessive soil moisture may promote stillborn fungal pathogens and cause serious diseases in ginseng fields. This study showed that soil moisture levels for optimum growth and health of ginseng varied with soil texture. Fifty- percent available moisture for sandy loam and 75% for silty loam are the best moisture levels for good growth and higher yield.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.5
• /
• pp.63-72
• /
• 2004

This study was carried out to analyze effects of soil, water level and shading on growth of sweet flag(Acorus calamus var. angustatus). Three types of soil were used, which included sandy, silty loam and paddy loam soil. Three levels of shading were applied in the experiment: no shading, 55％ shading and 75％ shading. The water levels were also adjusted to three levels in the experiment. The results are summarized as follows; 1. The cultivation of sweet flag in sandy soil with low water level resulted in decreased fresh weight compared to that at planting. This result indicates that the water level should be maintained higher than the soil surface for sweet flag growth in sandy soil. 2. 5 out of 72 sweet flags died in paddy loam soil. Water saturation of soil easily reduced paddy loam soil, and root growth of sweet flags in reduced soil condition were restricted, resulting in the dead plants. 3. The growth of sweet flag in paddy loam soil was worse than those in silty loam, indicating that reduced soil conditions in paddy loam is harmful to root growth. In planting sweet flags in paddy loam, improved soil aeration in paddy loam soil is necessary for good growth of sweet flag. 4. The maintaining of high water levels is better than that of low water levels in sweet flag cultivation. During winter, soil near the water surface froze and sweet flags in frozen soil were stressed physiologically. Maintaining high water levels prevents soil from being frozen which is good for the growth of sweet flags. 5. There was not significant difference in the growth of the sweet flag between non-shading and 55％ shading. It thus appears that sweet flags can grow soundly under shading rate lower than 55％.