• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.517-523
• /
• 2003

We studied the physical properties of silk fabrics after degumming, the dyeability and the color fastness of silk fabrics after degumming and sericin fixing. As the sericin was removed from silk fabrics, the rate of weight loss increased and both the abrasion resistance and the drape coefficient decreased. This means that the amount of the sericin remained in silk fabrics significantly affects the physical properties of silk fabrics. On the surface and the cross-section of silk fabrics, the silk fibers enclosed by the sericin seemed to be in a lump shape. Each fibroin strand, however, got scattered, as the process of degumming went through. The dyeability of silk fabrics degummed decreased at between 20$^{\circ}C$∼80$^{\circ}C$ the dyeing temperature, on the other hand, it significantly increased over 80$^{\circ}C$. The dyeability of the sericin-fixed silk fabrics was lower than that of the non-serin-fixed silk fabrics, to a little extent. The colorfastness of crocking in the dyed-silk fabrics was a little low and that of the sweat was much lower in a basic sweat. Especially, the colorfastness of the partially degummed silk fabrics was low, because the sericin was not stable in the condition of sweat. Therefore, the process of sericin fixing is essentially required, for the partially degummed silk fabrics and the process of degumming itself.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.37-40
• /
• 2001

This study was carried out to investigate the optimum condition for silk sericin collection from degumming solution using some aluminium salts with various treatment conditions and examine the thermal properties of silk sericin collected from degumming solution. Silk sericin was precipitated by treatment of aluminium metal compound from degumming solution. The best optimum collecting conditions of silk sericin from degumming solution are the concentration of 2 $m\ell$/l of polyaluminium chloride (PAC), pH range of 5~7 and room temperature. The reduction of water pollution was evaluated by decreasing the chemical oxygen demand (COD) and nitrate ion (NO$_3$￣). Thermal stability of silk sericin collected from degumming solution was a little lower than that of hot water.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.67-72
• /
• 2009

To investigate the strong and effective sericin fixing agents and conditions, raw silk fibers were treated with the mixtures of urea-formalin, thiourea-formalin and melamine-formalin as sericin fixing agents, respectively. And the treated raw silk fibers were degummed by the degumming liquors of alkaline detergent and sodium carbonate to confirm the hardness of sericin fixation. The weight of raw silk fibers was decreased in the process of sericin fixation treating at 80$^{\circ}C$ for 60min. The effective sericin fixation was obtained by treating at $60{\sim}80^{\circ}C$ for 15min with the mixture of melamine and formalin. The mixture of melamine and formalin showed an outstanding ability of sericin fixation because the three amino groups of melamine were able to cross-link the hydroxy amino acids of sericin such as serine with the assistance of formalin.

• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.137-141
• /
• 1995

The sericin fixation of raw silk by glutaraldehyde solutions with catalyst(serifix B) was done and the effect of sericin fixation by catalyst on reaction mechanism, whiteness and physical properties were investigated and discussed. The obtained results were summarized as follows; 1) The complete sericin fixation were obtained by glutaraldyhyde solution regardless the concentration of catalyst. 2) The tenacities of sericin fixed silk increased in comparison with that of nontreated silk. 3) There were not constant tendency in elongation of sericin fixed silk in comparison with nontreated silk. 4) The whiteness of sericin fixed silk treated glutaral-silk in comparison with nontreated silk. 5) FT-IR spectra were quite different from sericin fixed reagent and catalyst.

• Journal of Sericultural and Entomological Science
• /
• v.40 no.2
• /
• pp.143-149
• /
• 1998

For the application of silk sericin, silk sericin powders were prepared by various spray dry conditions and the characteristics of silk sericin/polyurethane mixed films were investigated. When the sericin was dried from the solution at higher inlet and outlet temperature, larger sizes of the powder particles were obtained. It was also found that inlet and outlet temperatures were important factors affecting the shape and surface characteristics of sericin power particle. The many holes and empty spaces were observed at the surface and cross section of sericin/PU mixed film. With the increase of the amount of sericin powder in the mixed films, the size and number of holes and empty spaces were increased. The thickness of sericin/PU mixed film was increased with the content of sericin powder. As the portion of sericin powder increase, the tenacity is decreased while the elongation slightly increased.

• Textile Coloration and Finishing
• /
• v.14 no.4
• /
• pp.249-258
• /
• 2002

Natural silk is formed by two proteins : the crystalline fibroin (inside the silk thread) and amorphous sericin (as a tube outside the thread). The degumming process is used to eliminate the external sericin prior to dyeing ; generally it makes use of soaps at about pH 10. Sericin is the protein constituent that "gums"together the fibroin filaments of cocoon silk. It constitutes about 25% of the weight of the cocoon, is soluble in hot water and "gels" on cooling. The removal of sericin from raw silk, known as degumming, is a simple but important process usually employing hot dilute soap or alkaline solution and occasionally dilute acids or enzymic methods. During degumming, alkali is taken up by the sericin and the free acid from the soap is formed ; this may be deposited on the fiber, reducing the rate of degumming and protecting it from hydrolysis. Alkali is often added to maintain or restore the pH of the baths, but it is rarely used alone, since it leaves the silk rather harsh in handle. If complete sericin removal is required as for printing, sodium carbonate may be added. If the pH of the bath exceeds 11, the fibroin is attacked. Recently, According to the development of electrolysis, we can be obtained the electrolytic reduction water(above pH 11.5) and electrolytic oxidation water (below pH 3). The aim of this work was to study a degumming process using electrolytic water and a possibility of sericin recovery. The new degumming process used electrolytic water operates at $95^\circ{C}$ for 2hr. without any reagents. The wastewater of this process are formed by a solution of sericin in water. This conditions suggest the study of a possible recovery of this protein (sericin) which has an amino acid composition suitable for many used in cosmetics, textile finishing agents, animal feeding, etc. The degumming process using electrolytic water is available to reduce treatment costs and pollute and at the same time to recover sericin.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.41 no.1
• /
• pp.1-5
• /
• 2020

Tumor necrosis factor-α (TNFα) is a representative marker for inflammation. Silk sericin is known as mild TNFα inducer. The purpose of this study was to compare the level of TNFα among different fractions of silk sericin. Silk sericin was extracted from cocoon and separated it by molecular weight. Each fraction was applied to RAW264.7 cells. The level of TNFα was evaluated by western blot and ELISA assay. In results, the level of TNFα was increased as time-dependent manner. Higher molecular weight fraction of sericin induced higher amount of TNFα than lower molecular weight fraction. In conclusion, different molecular weight fraction of sericin induced TNFα differently.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2021

Toll-like receptor (TLR) is responsible for the recognition of foreign protein. Accordingly, TLR is mainly expressed in the immune associated cells. When foreign protein such as silk sericin is considered for the graft, the response of TLR should be considered. TLR is not all or none responsive receptor. TLR can be activated differently by the intensity of the input. Silk sericin is easily fragmented. The protein conformation of silk sericin is different to the degumming method. TLR response to silk sericin may be different to the degumming method. Consequently, objective tailored extraction method should be investigated and developed.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.30 no.1
• /
• pp.1-5
• /
• 2015

Understanding the interactions between fibroin and sericin is crucial in solving the mechanism of silk spinning. In this study, various commercially available dyes were used to monitor the interface between fibroin and sericin during the gelation of fibroin. The phase separation between fibroin and sericin could be observed by the addition of azo dyes over a certain molecular weight. Furthermore, the addition of the dyes to the sericin layer showed vivid phase separation over addition to the fibroin layer.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.29-37
• /
• 2008

Polar amino groups of the waste SS(silk-sericin) were modified by two isocyanate compounds of MOI[2-(methacryloyloxy)ethyl isocyanate] and AOI [2-(acryloyloxy)ethyl isocyanate]. When the MOISS (MOI-modified silk sericin) or AOISS(AOI-modified silk sericin) was pressed hot, vinyl groups in the MOI or AOI were polymerized and then the flexible and transparent films were obtained. Tensile moduli and strengths of the MOISS films were significantly improved as the MOI contents increased. By the addition of the isocyanate compounds, silk sericin films exhibited lower solubility to the distilled water($80^{\circ}C$) and also lower swell ratio to the distilled water(room temperature). In the effect of tensile properties and restraining the water swelling, MOI was better than AOI. BOD(biochemical oxygen demand)/TOD(theoretical oxygen demand) of the pure sericin film was almost 100% perfect level after 10 days immersion into the activated sludge. With increasing isocyanate content reacted with polar amino groups, BOD/TOD decreased. When more than 50 mol% of polar amino groups remained unreacted, sericin films could retain more biodegradability. Comparing with MOI from the viewpoint of biodegradability, AOI was more effective.