• 한국잠사곤충학회지
• /
• 제22권1호
• /
• pp.63-68
• /
• 1980

제사업의 경영적 특성을 고려하여 경영수익성의 격차를 결정짓는 요인을 비교 분석하여 다음과 같은 결과를 얻었다. 1. 제사업의 경영수익성을 결정짓는 것은 매출이익률이다. 2. 매출이익률을 실현시키는 것은 생사원가구성비목 중 일반 관리 판매비이다. 3. 생사원가와 상관이 높은 비목은 제조경비이다.

• 한국식품영양과학회지
• /
• 제35권1호
• /
• pp.121-125
• /
• 2006

견 피브로인 용액 에 PEG를 농도 별로 처리하거나 PEG와 Gly를 혼합하여 사용하여 필름을 제조한 뒤 그 물성을 측정하였다. PEG의 농도가 $1\%$인 견 피브로인 필름에서 32.54 Mpa로 가장 높은 인장강도를 나타냈고, PEG의 농도가 높아 질수록 인장강도는 감소하였다. 인장강도와는 반대로 PEG의 농도가 증가할수록 신장률은 증가하는 경향을 보였는데 PEG의 농도가 $3\%$서 $4.5\%$로 증가할 때 $350\%$ 이상의 높은 증가율을 보였고 또한 투습도의 경우 $66\%$ 증가하였다. PEG와 Gly의 비율을 다르게 한 경우 인장강도는 PEG:Gly의 비가 100:0일 때 13.72 Mpa로 가장 높았고, 0:100일 때 4.58 Mpa로 가장 낮았다. 이에 반하여 신장률은 PEG:Gly의 비가 75:25일 때 $130.95\%$로 가장 높게 나타났다. 투습도의 경우 Gly만을 넣어 만든 경우 $5.13\;ng{\cdot}m/m^2s$ Pa로 투습도가 가장 높게 나타났고 Gly의 비가 높아질수록 투습도가 증가하는 경향을 보였다. 전체적인 Hunter L, a, b와 ${\Delta}E$ 값은 PEG 농도와 PEG:Gly의 혼합하여 만든 필름 사이에 뚜렷한 차이가 없었다. 본 실험 결과 견 피브로인 필름의 가소제로써 PEG와 Gly를 혼합하여 사용할 경우 PEG만을 사용하여 만든 필름보다 신장률이 크게 증가하며, 또한 PEG와 Gly을 75:25의 비로 흔용하여 사용한 경우가 Gly의 첨가로 투습도가 조금 증가하기는 하였으나 인장강도는 상업용 LDPE (low density polyethylene)와 유사한 수치를 나타내면서도 높은 신장률을 가지고 있기 때문에 식품포장재로 활용이 가장 적합하다고 판단된다.

• 한국잠사곤충학회지
• /
• 제17권1호
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제33권2호
• /
• pp.108-112
• /
• 2016

Silk has been used extensively in textile applications because of its good luster and feel. However, the low elongation and elastic recovery of silk has limited its use in a wider variety of textile applications. In this study, silk textile samples were made with a highly twisted silk/polyurethane core-spun yarn. They were immersed in water and dried at different temperatures, and the effect of treatment temperature on the mechanical properties of the silk textile was examined. It was found that the water temperature strongly affected the morphology and mechanical properties of the silk textile, whereas the drying temperature did not. As the water temperature was increased, the weft silk yarn became tangled and the interval between warp yarns decreased, resulting in shrinkage of the silk textile. When the silk textile was immersed in water at high temperature (i.e., $100^{\circ}C$), the elongation of the textile increased eight-fold as compared to an untreated silk textile. The maximum elastic recovery ratio of the silk textile was 96.7%.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제45권2호
• /
• pp.70-77
• /
• 2022

Wet-spun regenerated silk fibroin (RSF) fibers have been extensively studied owing to their 1) useful properties as biomaterials, including good blood compatibility and cyto-compatibility; 2) the various methods available to control the structural characteristics and morphology of the fiber, and 3) the possibility of fabricating blended fibers and new material-embedded fibers. In this study, silk nanofibrils prepared using a new method were embedded in RSF to fabricate wet-spun silk nanofibril/RSF composite fibers. Up to 2% addition of silk nanofibril, the silk nanofibril/RSF dope solution showed slight shear thinning, and the G' and G" of the dope solution were similar. However, above 3% silk nanofibril content, the viscosity of the dope solution significantly increased. In addition, shear thinning was remarkably evident, and the G' of the dope solution was much higher than the G", indicating a very elastic state. As the silk nanofibril content was increased, the wet-spun silk nanofibril/RSF composite fiber became uneven, with a rough surface, and more beaded fibers were produced. Scanning electron microscopy observations revealed that the beaded fibers were attributed to the inhomogeneous dispersion and presence of agglomerates of the silk nanofibrils. As the silk nanofibril content and RSF concentration increased, the maximum draw ratio decreased, indicating the deterioration of the wet spinnability and post-drawing performance of silk nanofibril/RSF.

• 한국잠사곤충학회지
• /
• 제42권1호
• /
• pp.42-47
• /
• 2000

Structural and thermal characteristics of silk fibroin/poly(2-hydroxyethyl methacrylate)(PHEMA) blend films were investigated using FTIR, X-ray diffractometer, differential scanning calorimeter, thermogravimeter and scanning electron microscope. FTIR spectra showed that the conformation of silk fibroin prepared by dissolving in formic acid was $\beta$-sheet, which did not affected by blending with PHEMA. The X-ray diffraction patterns also showed that individual crystalline structure of silk fibroin and PHEMA was not affected for the blend films. The initial thermal decomposition temperature of silk fibroin/PHEMA blend film tends to be higher than either of silk fkbroin or PHEMA. Thermal stability of both polymers, more notably PHEMA, can be improved by blending two components. As a result of SEM observation, the phases separation for silk fibroin/PHEMA blend films occured regardless of blend ratio ; continuous and dispersed phase were silk fibroin and PHEMA component, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제18권2호
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.

• 한국의류학회지
• /
• 제41권5호
• /
• pp.914-928
• /
• 2017

This research investigated the effect of pH of dyebath and dyeing temperature on the dyeability of indigotin and indirubin on silk as well as the relationship between the amount of indigotin and indirubin detected from the dyed silk through HPLC-DAD analysis and the color of samples measured using a spectro-colorimeter. Indigo standard dye and indirubin standard dye were deliberately mixed by ratios 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100 to dye silk with a different pH of dyebath (7, 11) and different dyeing temperatures ($50^{\circ}C$, $70^{\circ}C$). The amount of indigotin and indirubin pigments in silk was calculated using regression equations obtained from standard calibration curves of indigotin and indirubin. A higher indigotin percent ratio resulted in the higher K/S values and the higher amount of indigotin detected from silk. However, higher indirubin percent ratio in the mixed dye did not relate to the higher indirubin pigment detected in silk. While indirubin showed low or negative contribution to the K/S values, it showed a higher effect on the color of dyed silk. Higher amounts of indirubin in dyed silk resulted in a darker PB color, which led to P color with increases in indirubin content.

• Advanced Composite Materials
• /
• 제16권4호
• /
• pp.349-360
• /
• 2007

Recently, natural fiber reinforced composite is attracting attention and considered as an environmentally friendly material. Usually cellulosic fibers are used to reinforce the composites, but some protein fibers such as silk and wool serve the same purpose. In this paper, we proposed a method of producing artistic composite from artistic fabric by using silk fiber reinforced biodegradable plastic, which is designated as 'silk composite', for reinforcement. In order to expand applications of the silk composite, we performed the compression molding of decorative laminates with woody material, which was selected as a core material, and examined the properties of molded decorative laminates with various content of the silk composite. Since plywood and medium-density fiberboard (MDF) are widely used for decorative laminates, we selected them as core materials. As a result, flexible decorative laminates with high flexural strength were obtained by compounding the silk composite with wood materials.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.61-66
• /
• 2011

Recently, the speed reducer which is applied to robot has conducted a steady development on developments in the field of robotics. Among them, Harmonic drive is a high-stiffness, precision-controlled speed reducer and has high precision, compact, light in weight and high-reduction-ratio characteristics. The feature of flexspline of Harmonic Drive are two types. One is Cup type, the other is Silk Hat type. Silk Hat type is used in case of lighter and more compact in spatial because Silk Hat Type is hollow. According to the shape of silk hat, diaphragm is fractured because stress is concentrated. In this paper, the various shapes of silk hat are suggested to improve the durability of silk hat. And in the case of each shape, a study on stress and deformation using the FEM tool was carried out on flexspline.