• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.160-160
• /
• 2011

In the present work, $TiO_2$ fiilms supported by porous silica gel with high surface area synthesized by atomic layer deposition(ALD). Porous structure of silica substrate could be maintained even after deposit large amount of $TiO_2$ (500 cycles of ALD process), suggesting the differential growth mode of $TiO_2$ on top surface and inside the pore. All the $TiO_2$-covered silica samples showed improved MB adsorption abilities, comparing to bare one. In addition, when silica surface was covered with $TiO_2$ films, MB adsorption capacity was almost fully recovered by re-annealing process (500$^{\circ}C$, for 1 hr, in ambient pressure), whereas MB adsorption capacity of bare silica was decreased after re-heaing process. FT-IR study demonstrated that $TiO_2$ film could prevent deposition of surface-bound intermediate species during thermal decomposition of adsorbed MB molecules. Photocatalytic activity of $TiO_2$/silica sample was also investigated.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.603-608
• /
• 2001

$MO-SiO_2$ (M = Zn, Sn, In, Ag, Ni) binary silica gels were synthesized by sol-gel method and their structural change with the kind of metal ions was characterized by XRD, FT- IR and $^{29}$Si-NMR. Although X-ray analysis showed partial recrystallization of $AgNO_3$ in $Ag-SiO_2$gel, crystalline phase formed by the bonding between metal ion and the silica matrix didn't appear in all $MO-SiO_2$ gels. The FT-IR analysis showed that Zn, Sn and in partially formed Si-O-M bonding in silica matrix and made an shift of absorption peak to by Si-O-Si symmetrical vibration. In addition, $^{29}Si-NMR$ studies showed that Zn, Sn and In didn't affect sol-gel process of silica and were linked with non-bridging oxygen of the linear silica structure, which formed imperfect network because of low temperature sol-gel process. Ag and Ni make a role of catalysis on sol-gel process, resulting in densifying the silica network structure.

• Journal of the Korean Ceramic Society
• /
• v.25 no.5
• /
• pp.479-487
• /
• 1988

In this study we studied the function of Glycerol as a DCCA(Drying Control Chemical Additives) in the preparation of silica bulk glas through Sol-Gel method. We used TEOS(Tetra Ethyl Ortho Silicate) and maintained the mixing ratio of TEOS : H2O : EtOH : HCI as 1 : 4 : 4 : 0.0007(mol) and varied glycerol input quantity from 0.1vol% considering the ethnaol input quantity as 100vol%. We investigated the changes from Sol-Gel Synthetic solutions to the glass using DT-TG, FT-IR and other instruments. The results obtained from this experiment showed that the dried gels made from the synthetic solutions containing 0.1-1.0vol% of glycerol were easily heat-treated up to 85$0^{\circ}C$ so that transparant bulk silica glass was prepared.

• Journal of the Korean Ceramic Society
• /
• v.34 no.9
• /
• pp.941-948
• /
• 1997

CuCl nanocrystallites dispersed nonlinear optical silica and borosilicate glasses were fabricated by sol-gel process. CuCl powder was dissolved in TEOS(Si(OC2H5)4) and TMB((CH3O)3B), precursors of silica and borosilicate glasses, with ethanol, water and HCl, and precipitated through the heat treatment in the matrix glass. The optical properties of CuCl doped glasses were measured using the spectrophotometer at room temperature and low temperature(77K); Z1, 2 and Z3 exciton peaks from the absorption spectra, were observed at about 370 nm and 380 nm, respectively. The average radius of nanocrystallites, calculated from the blue shift of Z3 excitons, was measured according to annealing temperature and time. The precipitation temperature of CuCl nanocrystallites was decreased when boron was added to silica glass. Increase of annealing temperature and time made average radius of nanocrystallites saturated about 2 nm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.73-78
• /
• 2003

The influence of calcination temperature on the pore structure of freeze dried silica gel derived from tetraethyl orthosilicate (TEOS) was investigated using $N_2$adsorption and mercury intrusion techniques. Freeze dried material contained not only 4-6 nm sized mesopores and 6-10 $\mu\textrm{m}$ sized macropores, but minor micropores. The change of pore structure due to the increase of calcination temperature was dependant upon the degree of densification.

• Journal of Industrial Technology
• /
• v.26 no.A
• /
• pp.199-205
• /
• 2006

Ozone alone and catalytic ozone processes were introduced for treatment of humic acid, which is representative refractory organic compound. The treatment efficiencies of humic acid in each process were analyzed in pH variation, DOC removal, and $UV_{254}$ decrease. Mn loaded GAC catalyst was prepared by loading potassium permanganate onto the granular activated carbon surface. BCM-GAC and BCM-Silica gel catalyst were prepared by BCM. $UV_{254}$ decrease in all processes was comparatively high with efficiency over 87%. DOC removal in ozone/GAC process was the highest with 78%, and removal rates for other processes followed the order ozone/BCM-GAC(62%) > ozone/BCM-silica gel(45%) > ozone/silica gel(43%) > ozone/Mn Loaded GAC(42%) > ozone alone(37%).

• KSBB Journal
• /
• v.17 no.4
• /
• pp.365-369
• /
• 2002

An iron-storage protein, ferritin is a spherical shell consisting of 24 H-and L-chain subunits. Soluble form of fused($F_{H}+F_{L}$ chain) ferritin was separated from disrupted recombinant E. coii cells, followed by silica powder adsorption. Ferritin was recovered from silica-poweder by distilled water, which was applied to gel filtration chromatography(GFC). Collected ferritin fractions from the GFC were assayed via iron-uptake and its molecular weight determined using GF-HPLC. Fused ferritin showed a higher activity than the M- or L- chain ferritin by two times.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.116-124
• /
• 2007

An adsorption chiller is expected to have high energy-efficiency in utilizing the waste heat exhausted from a process. The objective of this paper is to investigate the performance of silica gel-water adsorption chiller from the cycle simulation and to provide a guideline for design of the adsorption chiller. The effect of cycle time, inlet temperature and water flow rate on the cooling capacity and COP is quantified during the cycle operation. It is found that the performance of adsorption chiller is more sensitive to the change of inlet water temperature rather than the water flow rate. It is concluded that the COP is 0.57 in the standard conditions(hot water $80^{\circ}C$, cooling water $30^{\circ}C$, chilled water inlet temperatures $14^{\circ}C$ and cycle time 420sec).

• Journal of Environmental Health Sciences
• /
• v.6 no.1
• /
• pp.23-26
• /
• 1979

한국에서 사용하고 있는 carbamate계 살충제의 사용율(%)은 1968년경에는 2.1%인데 비해서 현재는 급증되고 있는 실정에 있다. 따라서 이로 인한 자타살 사건, 환경오염, 살포시 급만성 중독 등의 사고가 빈번히 발생하고 있는 동시에 법화학적 분석에도 많은 문제점이 되두되고 있으므로 1차적으로 시판되고 있는 carbamate계 살충제를 thin layer chromatography에 의해서 성분의 분리 확인 시험을 실시한 결과 1) Silica Gel G-60 및 Silica Gel F-254에서 적합하였고 2) 전개용매는 chloroform: benzeneP: carbontetra chloride (60:30:25), cyclohexane: acetone (80:20), cyclohexane:acetone(70:30), ether:hexane(80:20)에서 9종의 살충제가 잘 분리되었으며 3) UV light (2537 ${\AA}$) 및 2.6-dibromoquinone-4-chlorimide는 전개는 Rf치를 육안으로 구분하는데 가장 양호하였고 4) Carbamate계 살충제 중 Bux-2와 Sevin은 Silica Gel G-60에서 UV light (2537 ${\AA}$)에서 특이한 청보라 및 청색형광을 관찰할 수 있었다. 5) 이상의 결과를 보아 법화학적 시료중에 함유된 카바메이트계 농약의 분석은 가능할 것이며 또한 이 방법의 적용이 현재의 실정으로서는 적합한 것으로 사료되는 바이다.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.8
• /
• pp.817-822
• /
• 2000

Crack-free hard coating siIica films were prepared by sol-gel processfrom twokinds of silicon alkoxide (tetra-ethoxysilane and methyltrimethoxysilane) and two kinds of alcohol (methanol and isopropyl alcohol) with an acid catalyst,acetic acid. A silicate framework of the precursor solution was investigated by infrared spectros-copy (IR) in the process of hydrolysis and condensation. Theextent of the condensation in the intermediates was elucidated by gel permeation chromatography (GPC) and 29Si-NMR spectroscopy. The hard coating films werecharacterized by IR,scanning electron microscope (SEM), thermo gravimetric analyzer (TGA) and dif-ferential scanning calroimeter (DSC). The synthetic condition for the crack-free and transparent silica film for-mation was optimized interms of starting materials for the precursor solution as well as preparation method of the silica film.